Bonprix 43274284 Beaded Pendant Shade Instruction Manual

Bonprix 43274284 Beaded Pendant Shade

INSTRUCTIONS FOR INSTALLATION

Caution: Before adding or replacing your pendant shade, make sure the electricity is switched off and any plugs are removed from the wall socket. Always allow bulb to cool completely before installation.

Caution: Always ensure pendant shade is completely installed and secure before connecting to an electricity supply.

1. Remove Beaded Pendant Shade from packaging.
2. If you are using an E27 Edison Screw Bulb, remove Part(A) from the shade as per diagram. If you are using an E14 Edison Screw Bulb, please place the adaptor in the open gap.
3. Install Beaded Pendant Shade to light fitting.
4. Install Globe (not included) into the Lamp Holder.
5. Check to ensure that all the components have been assembled correctly.
6. Connect to electricity to see Beaded Pendant light up.
   

Care information

1. Carefully read all instructions for the assembly and use of this product before connecting to an electricity supply.
2. Light bulbs become very hot in seconds. Do not attempt to touch the light while the lamp is lit and supervise others accordingly.
3. Before cleaning or replacing shade, switch off the light. Allow the bulb to cool for at least 10minutes before touching it and making the change.
4. Ensure the new bulb is secure in the lamp holder before reconnecting to the power supply. If in doubt, consult a qualified electrician.

FOR INDOOR USE ONLY

Documents / Resources

| Bonprix 43274284 Beaded Pendant Shade [pdf] Instruction Manual
43274284 Beaded Pendant Shade, 43274284, Beaded Pendant Shade, Pendant Shade
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>