EKVANBEL V5.3 Business Bluetooth Headset User Manual

EKVANBEL V5.3 Business Bluetooth Headset

How to Wear

A proper fit on your head is importc1nt for both comfort c1nd optimc1I sound quality. Here c1re some guidelines:

1. Reversible wearing style: The A6L can be worn on the left or right by flipping the microphone to the other side
2. Rotate the eartip and adjust the retractable earhook to fit the shape of your ear.
3. Adjust the boom. For better voice capture. it is recommended to position the microphone dose to the corner of your mouth.

What’s in the Box

Package Contento

• A. Headset x 1
• B. Charging Case xl
• C. Type-C ChMging Cablexl
• D. Eartips x 6 (Includes one on headset)
• E. LJ5er Manual x 1

Product Overview

1. Multi-Function Button(MFB)
2. Volume+
3. volume-
4. Mute Button
5. LED indicator
6. Noise RMuction Microphone
7. Microphone
8. ChJrging Port
9. Charging Contacts
10. Digital Power Display of Case
11. Charging Case Interface
12. Charging Port

Basic Operation

LED Indicator

• Power on: LED flashes green for ls
• Power off: LED flc1shes red for 2s then turns off
• Pairing mode: LED flashes green & red alternately
• Connected: Green light flc1shes once every 8 seconds
• Charging status: Red light on
• Charging complete: LED flc1shes green for 5s then turns off
• Low· battery: Red light on with a voice prompt
• Reset: LED flashes green 2 times
  • Charging status: Green number flashing Charging complete: Display the number 100 for 40s then turns off
  • Charging headset: with the charging case: Green number display for 8s then turns off

Voice Prompts

Basic Specifications

Bluetooth Pairing and Connection

NOTE:

1. Power On Automatically
   • Pick up the headset from the charging case, the head5et will automatically power on.
2. Power On Automatically
   • Unplug the charging cable of the headset when charging, the headset will automatically power on.
3. How to reset?
   • During charging, hold the ”volume+” and ”volume-” for 5 seconds at the same time, then the LED Indicator fbshs green 2 times.

Pairing with 2 Devices Simultaneously

1. Follow the pairing procedure as instructed in part “Getting Paired” to pair the hec1dset with the 1st Bluetooth device.
2. Turn off the Bluetooth of your 1st device. The headset will enter pairing mode.
3. Repeat the p;iiring procedure to pair the 2nd Bluetooth device.
4. Turn on Bluetooth of your 1st device, click to reconnect to “A6L • on the Bluetooth list.
5. Turn the headset off and then turn on again. The headset will automatically connect to the 2 devices at the same time.
6. Now you can operate two devices through one headset.

Charging the Device

Two ways to Charge the Hec1dset ·

• A: Charge the Headset Directly
• B. Charge the Headset via the Charging Case

FCC Statement

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.

WARRANTY

Contact us via email or Facebook with your Amazon order number to active below benefits:

1. Lifetime Warranty Extension
2. Support refunding or replacing at NO COST for defective products even if Amazon’s one-month return window is closed.
3. 24/7 technical support for any issues.
   • Email :[email protected]
   • Facebook :@EKVANBEL

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>