InCoax Access A251 Debuts Fibre Access FWA Modem User Manual
- June 15, 2024
- INCOAX
Table of Contents
InCoax Access A251
Warranty
InCoax Access A251 Debuts Fibre Access FWA Modem
InCoax Access A2511/A2512
InCoax Access A2511/A2512 RPF
(Reverse Power Feed)
Reverse Power Feed
InCoax Access A2511 RPF AA
InCoax Access A2511 RPF AB
InCoax Access A2511 RPF AC
InCoax Access A2511 RPF AD
InCoax Access A2511 RPF AE
InCoax Access A2511 RPF IP
InCoax Access A2511 RPF AA ER
InCoax Access A2511 RPF AB ER
InCoax Access A2511 RPF AC ER
InCoax Access A2511 RPF AD ER
InCoax Access A2511 RPF AE ER
InCoax Access A2511 RPF IP ER
InCoax Access A2511 RPF AA
InCoax Access A2512 RPF AB
InCoax Access A2512 RPF AC
InCoax Access A2512 RPF AD
InCoax Access A2512 RPF AE
InCoax Access A2512 RPF AA ER
InCoax Access A2512 RPF AB ER
InCoax Access A2512 RPF AC ER
InCoax Access A2512 RPF AD ER
InCoax Access A2512 RPF AE ER
InCoax Access A2511 AA
InCoax Access A2511 AB
InCoax Access A2511 AC
InCoax Access A2511 AD
InCoax Access A2511 AE
InCoax Access A2511 IP
InCoax Access A2511 AA ER
InCoax Access A2511 AB ER
InCoax Access A2511 AC ER
InCoax Access A2511 AD ER
InCoax Access A2511 AE ER
InCoax Access A2511 IP ER
InCoax Access A2512 AA
InCoax Access A2512 AB
InCoax Access A2512 AC
InCoax Access A2512 AD
InCoax Access A2512 AE
InCoax Access A2512 AA ER
InCoax Access A2512 AB ER
InCoax Access A2512 AC ER
InCoax Access A2512 AD ER
InCoax Access A2512 AE ER
AA/AB/AC/AD/AE/IP – MoCA-bands
ER – Extended range
InCoax Access A2511
InCoax Access A2512
(TV service co-existence)
Performance
- Based on MoCA Access 2.5
- Up to 2.5 Gbps throughput on LAN port
- MoCA bands: AA, AB, AC, AD, AE
- RF-channel bandwidth: 100 MHz
- Bonded operation with 3, 4 or 5 RF-channels
- MoCA RF frequency range: 400 – 1675 MHz
- PHY rate: Up to 780 Mbps per RF-channel
- MAC rate: Up to 500 Mbps per RF-channel
- MAC rate 1.5/2.0/2.5 Gbps (3/4/5 RF-channels)
- Normal range: 4 dBm max output power; automatically adjusted per modem
- Extended range: 17 dBm max output power; automatically adjusted per modem
- Modulation: QAM 1024/512/256/128/64/32/16/8, BPSK, QPSK
- Multiplexing methods: TDMA/TDD MoCA over coax
Physical
- 1 x MoCA Access and TV-in port; F-female Connector 3/8-UNEF32, 75 Ω
- 1 x TV-out (version dependent); F-female Connector 3/8-UNEF32, 75 Ω
- 1 x LAN port; RJ-45 connector; CAT5e, CAT6, CAT7 UTP; 10/100/1000/2500
Mbps, IEEE 802.3 compliant
Indicators
- Power on, Coax Link status, LAN status, RPF status (version dependent)
Dimensions & weight
- 97 x 28 x 112 mm (W x H x D); 160 g
Environmental
- Operating Temperature: 0 °C to +40 °C
- Humidity: 20 % – 80 %
- Altitude: max 2000 m
- Storage (non-condensing): -20 0 C to +50 0 C and 5 % to 90 %
- RoHS, RoHS2, UL 94 V0
Power
- RPF modem with power adapter: 56 VDC nominal
- Power consumption, typically: 5 W (stand-by) / 20 W (active RPF)
- Voltage input: 100 – 240 VAC; ~50/60 Hz; 0.8 A Max
- Non RPF modem with power adapter: 12 VDC nominal
- Power consumption, typically: 4 W
- Voltage input: 100 – 240 VAC; ~50/60 Hz; 0,4 A Max
- Protection class II, Over voltage category II
Approvals
- Marking: CE, FCC, IC, ETL, UKCA
- EMC: EN55032 Class B, EN55035, FCC Part 15 Class B, ICES-003(B)/NMB-3(B)
- Safety: EN IEC61000-3-2, EN61000-3-3, EN62368-1, UL62368-1, CSA-C22.2 NO.62368-1
- ROHS: ROHS Directive 2011/65/EU and 2015/863/EU
Standards
- IEEE 802.3bz – 2500BASE-T Gbps Ethernet (10/100/1000/2500 Mbps)
- IEEE 802.3ac – Q-tag
- IEEE 802.1p – QoS
- IEEE 802.1q – with full VLAN-ID range.
- ETSI TS 101.548-2 Reverse Power Feed
FCC ID: 2ATQM1000-0608
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning
The power adapter BI12TA-120100-I supplied with A2511/A2512 must only be used
with A2511/A2512 and A2511/A2512 must only be connected to the supplied power
adapter BI12TA-120100-I. The power adapter F30L2-560050SPACP supplied with
A2511/A2512-RPF must only be used with A2511/A2512-RPF and A2511/A2512-RPF
must only be connected to the supplied power adapter
F30L2-560050SPACP.
DISPOSAL AND RECYCLING
**** GENERAL
The symbol to the right is found on the product and packaging.
It means that according to local laws and regulations this product should not
be disposed in the household waste but sent for recycling.
Please take it to a collection point designated by your local authorities once
it has reached the end of its life. Some of these will accept products for
free.
By recycling the product in this manner you help to conserve the environment
and protect human health.
INCOAX AND THE ENVIRONMENT
At InCoax, we understand and are committed to reducing any impact that our
operations and products may have on the environment. To minimize this impact
InCoax designs and builds its products to be as environmentally friendly as
possible, by using recyclable, low toxic materials in both the products and
packaging.
InCoax recommends that you always switch off or unplug your InCoax products
when they are not in use. By doing so you will help to save energy and reduce
the carbon dioxide emissions.
LIMITED WARRANTY – GENERAL TERMS
This Limited Warranty applies only to InCoax-branded hardware products sold by
or leased from InCoax Networks, its subsidiaries, affiliates, authorized
resellers, or country distributors (collectively referred to in this Limited
Warranty as “InCoax”) with this Limited Warranty. The term “Hardware Product”
is limited to the hardware components and required firmware. The term
“Hardware Product” DOES NOT include any software applications or programs.
InCoax guarantees that the Hardware Products that you have purchased or leased
from InCoax are free from defects in materials or workmanship under normal use
during the Limited Warranty Period. The Limited Warranty Period starts on the
date of purchase or lease from InCoax, it is valid for 13 months and you fully
accept the InCoax Limited Warranty Conditions at purchase. Your dated sales or
delivery receipt, showing the date of purchase or lease of the product, is
your proof of the purchase or lease date. You may be required to provide proof
of purchase or lease as a condition of receiving warranty service. You are
entitled to hardware warranty service according to the terms and conditions of
this document if a repair to your Hardware Product is required within the
Limited Warranty Period. During the Limited Warranty Period, InCoax will, at
its discretion, repair or replace any defective component. All component parts
or hardware products removed under this Limited Warranty become the property
of InCoax. In the unlikely event that your Hardware Product has recurring
failures, InCoax, at its sole discretion, may elect to provide you with:
a) A replacement unit of InCoax’ choosing that is the same or equivalent to
your Hardware Product in performance or
b) To give you a refund of your purchase price or lease payments (less
interest) instead of a replacement. These are your only alternatives for
defective products.
It is mandatory that the product number and serial number of the unit be made
available when requesting a warranty service event. Failure to do so may
result in the event being deemed out of warranty by InCoax or, InCoax’
Authorized Service Providers, and therefore chargeable to the requester.
Unless otherwise stated, and to the extent permitted by local
law, new Hardware Products may be manufactured using new materials or new and
used materials equivalent to new in performance and reliability. InCoax may
repair or replace Hardware Products:
a) With new or previously used products or parts equivalent to new in
performance and reliability, or
b) With equivalent products to an original product that has been discontinued
Replacement parts are warranted to be free from defects in material or
workmanship for ninety (90) days or, for the remainder of the Limited Warranty
Period of the Hardware Product they are replacing or in which they are
installed, whichever is longer.
Notes:
I. Firmware upgrades are not covered under this InCoax Limited Warranty
Conditions. Firmware that is an integral part of the hardware is not
automatically upgraded when new versions of the firmware are released.
II. Firmware upgrades can be purchased as part of Support Services according
to actual Price List.
III. Hardware Replacement can be purchased as part of the Support Service
according to the actual Price List.
EXCLUSIONS
InCoax does not guarantee that the operation of this product will be
uninterrupted or error-free. InCoax is not responsible for damage that occurs
as a result of your failure to follow the instructions intended for Hardware
Product(s). This Limited Warranty does not apply to expendable or consumable
parts and does not extend to any product from which the serial number has been
removed, damaged or rendered defective. Furthermore, the Limited Warranty is
not applicable for the following:
a) As a result of accident, misuse, abuse, contamination, improper or
inadequate maintenance or calibration or other external causes.
b) By operation outside the parameters stated in the user documentation that
is shipped with the product (including incorrect input voltage or voltage
peaks caused by lightning).
c) Improper site preparation or maintenance.
d) Virus infection of the software and/or firmware.
e) Loss or damage in transit.
f) By modification or service by anyone other than:
I. InCoax
II. An InCoax authorized service provider
InCoax is not responsible for any interoperability or compatibility issues
that may arise when:
- Products, software, or options not supported by InCoax are used.
- Configurations not supported by InCoax are used.
- Parts intended for one system are installed in another system of different make or model.
LIMITATION OF LIABILITY
If the Hardware Product fails to work as warranted above, InCoax’ maximum
liability under the Limited Warranty is expressly limited to the lesser of the
price paid for the Product or the cost of repair or replacement of any
hardware components that malfunction in conditions during normal use. In no
event will InCoax be liable for, except as indicated above, any damages caused
by the Product or the failure of the Product to perform, including any lost
profits or savings, business interruption, loss of use or any other commercial
or economic loss of any kind, or special, incremental, or consequential
damages. InCoax is not liable for any claim made by a third party or made by
you for the third party. This limitation of liability applies whether damages
are sought, or a claim made, under this limited warranty or as a tort claim
(including negligence and strict product liability), a contract claim or any
other claim. This limitation in liability cannot be waivered or amended by any
person. This limitation of liability will be effective even if you have
advised InCoax, or an authorized representative of InCoax, of the possibility
of any such damages or even if such possibility were reasonably foreseeable.
This limitation of liability, however, will not apply to claims for
personal injury. This limited liability gives specific legal rights. You may
also have other rights that may vary from state to state or from country to
country. You are advised to consult applicable state or country laws for a
full determination of rights. If InCoax determines that damage/ failure that
exists is not covered by the warranty the end user will be contacted to
determine whether such damage/failure should be repaired for a charge or
whether the Hardware Product should be returned to the end user as received.
All associated transportation and handling costs are charged to the customer.
CUSTOMER RESPONSIBILITIES
To enable InCoax to provide the best possible support and service during the
Limited Warranty Period, you will be required to:
-
Maintain a proper and adequate environment, and use the Hardware Product in accordance with the given instructions.
-
Verify configurations, load the most recent firmware, install software patches, run InCoax diagnostics and utilities, and implement temporary procedures or workarounds
provided by InCoax while InCoax works on permanent solutions. -
Allow InCoax to keep resident on your systems or sites certain system and network diagnostics and maintenance tools to facilitate the performance of warranty support.
-
Provide remote connectivity through an InCoax-approved communications line, if required.
-
Assist InCoax in running the service tests.
-
Use the electronic data transfer capability to inform InCoax of events identified by the software.
-
Purchase InCoax-specified remote connection hardware for systems with remote diagnosis service, if required.
-
Use InCoax remote support solutions where applicable. InCoax strongly encourages you to use the available support technologies provided by InCoax. If you choose not to deploy available remote support capabilities, you may incur additional costs due to increased support resource requirements. It is recommended to cooperate with InCoax in attempting to resolve the problem over the telephone or e-mail. This may involve performing routine diagnostic procedures, installing additional software updates or patches, removing third-party options, and/or substituting options. You should maintain a procedure to reconstruct your lost or altered files, data, or programs that is not dependent on the Hardware Product under warranty support. Notify InCoax if you use Hardware Products in an environment that poses a potential health or safety hazard to InCoax employees or subcontractors. InCoax may require you to maintain such products under InCoax supervision and may postpone warranty service until you remedy such hazards. InCoax may request that you perform additional tasks as defined within each type of warranty service listed above and any other actions that InCoax may reasonably request in order to best perform the warranty support.
SOFTWARE LIMITED WARRANTY
Except as provided in the applicable software end-user license or program
license agreement, or if otherwise provided under local law, software
products, including any freeware (as defined below) or operating systems
preinstalled by InCoax are provided “AS IS” and with all eventual faults, and
InCoax hereby disclaims all other warranties and conditions, either express,
implied, or statutory, including, but not limited to, warranties of title and
non-infringement, any implied warranties, duties or conditions of
merchantability, of fitness for a particular purpose, and lack of software
viruses. Some states/jurisdictions do not allow exclusion of implied
warranties or limitations on the duration of implied warranties, so the above
disclaimer may not apply to you in its entirety. To the maximum permitted by
applicable law, in no event shall InCoax or its suppliers be liable for any
special, incidental, indirect, or consequential damages whatsoever. This is
including, but not limited to, damages for loss of profits or confidential or
other information, for business interruption, for personal injury, for loss of
privacy arising out of or in any way related to the use or inability to use
the software product, even if InCoax or any supplier has been advised of the
potential of such damages and even if the remedy fails of its essential
purpose. Some states/jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or ex- clusion
may not apply to you. The only warranty obligations of InCoax with respect to
software distributed by InCoax under the InCoax brand name are set forth in
the applicable end-user license or program license agreement provided with
that software. If the removable media on which InCoax distributes the software
proves to be defective in materials or workmanship within ninety (90) days of
purchase, your only alternative is to return the removable media to InCoax for
replacement.
InCoax Networks AB
+46(0)26 420 90 42
www.incoax.com
InCoax Access A251 Warranty 231207.indd