FittinQ 104091 Baleno WL 2 AR70 Lux Modern Wall Lamp Instruction Manual
- June 15, 2024
- FittinQ
Table of Contents
FittinQ 104091 Baleno WL 2 AR70 Lux Modern Wall Lamp
Product Information
Specifications:
- Power supply: 220-240V~
- Frequency: 50Hz
- Maximum wattage: 2x Max.35W
- Model: Baleno WL 2 AR70 Lux 104091 / 104092
- IP rating: IP44
Product Usage Instructions
1. Installation:
To install the product, follow these steps:
- Ensure the power supply is turned off.
- Position the product in the desired location.
- Securely attach the product using appropriate mounting hardware (not included).
2. Power On/Off:
To turn the product on or off, follow these steps:
- To turn the product off, set the switch to the “OFF” position.
- To turn the product on, set the switch to the “ON” position.
3. Adjusting Sizes:
To adjust the sizes of the product, follow these steps:
- For overall size adjustment, refer to the provided dimensions:
- Width: 83mm
- Height: 210mm
- Depth: 92mm
Contact Information:
If you have any questions or require further assistance, please contact our customer support:
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands Website: www.qazqa.nl
FittinQ LTD
55 Baker Street, London, W1U 7EU United Kingdom
Safety Precautions
Installation
Baleno WL 2 AR70 Lux 104091 / 104092X
- Important : Product must be installed by a qualifed electrician
- Automatic: Fitting will operate on and off automatically at dusk and dawn.
- Time Delay: Fitting incorporates a time delay to prevent accidental trigger
operation by car headlights and flashes. Pre-set 15-30sec delay to avoid false trigger (approx.).
- Ambient Light: 5 ~45Lumen (approx.).
Avoid a position where direct light from another source can fall on the control. Position out of direct sunlight if possible (not essential).
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product. Please keep this user manual for further reference
-
The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
-
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution
-
box, before any installation, maintenance or repair work is undertaken. Exterior lighting must not be installed during rain.
-
Take account of the minimal separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class II: the fitting is doubled insulated and does not require earthing
- Protection Class III: the fitting is low voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltage.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by wall switch
- The reference light angle and light space of the luminaire
-
Take note of the symbols when connecting wires:
- FittinQ B.V. Smaragdweg 52, 5527 LB Hapert, The Netherlands www.gazqa.nl
- FittinQ LTD 55 Baker Street, London, WIU 7EU United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>