ScorpionEXO R420 Polycarbonate Helmet Bluetooth Street Motorcycle User Manual

ScorpionEXO R420 Polycarbonate Helmet Bluetooth Street Motorcycle

Introduction

Congratulations on acquiring a premium ScorpionExo helmet.
This helmet embodies the latest, state-of-the-art design, engineering, and technology available in the market today and is an excellent investment for your comfort and protection.
Please remember that no helmet can protect you against all possible or foreseeable impacts even when built with the latest and best materials and technology.
The following information will help you to enjoy and properly care for your helmet.

Function

A helmet’s main function is to protect your head from impact in case of an accident. To accomplish this, a helmet surrounds your head with a matrix of materials designed to absorb and cushion impact energy in some accidents. A helmet is also designed to provide you with comfort while riding at speed and in various weather conditions. Yet, there is a trade-off: A helmet decreases hearing sensitivity, peripheral vision, and physical movement to a certain extent while providing protection and comfort.

Fit

It is important for maximum safety that your ScorpionExo helmet fit snugly and comfortably on your head with the retention strap (chinstrap) properly and snugly fastened. With the chinstrap firmly fastened, grab the back of the helmet with both hands and try to roll the helmet forward. If you can roll the helmet over the eyes, it is too loose and you should try another size of helmet.

Faceshields

The face shield on your ScorpionExo helmet protects you from the weather, small flying objects, and wind. Tinted shields are available to protect your eyes from excessive sunlight. The ScorpionExo SpeedView’E internal sun visor system allows you to instantly tint the sunlight.
WARNING
NEVER USE A DARK OR TINTED FACESHIELD OR SPEEDVIEW VISOR IN DARK OR POOR VISIBILITY RIDING CONDITIONS. This is not only unsafe but also illegal in most countries. NEVER WEAR A FACE SHIELD THAT HAS BECOME SCRATCHED OR WORN OUT, OR RIDE WITH A FACESHIELD THAT IS FOGGED BY CONDENSATION. SCORPIONEXO’S FACESHIELDS (CLEAR AND SMOKE ONLY) COME WITH A SCRATCH-RESISTANT COATING. The face shields and sun visors are coated, which also loses their capacity in about 2 years. For this reason, we recommend that you change your visor at least every two years with a new one.

Ventilation Systems
Ventilation systems are designed and engineered to maximize your comfort in a wide range of temperatures. Familiarize yourself with the vents on your street helmet. Some vents have detents allowing partial opening and closing, thereby controlling intake and exhaust airflow. Your helmet ventilation systems should be kept clear of any obstructions including dirt, insects, or other items that could interfere with the proper flow of air. The ventilation systems play an important role, especially during physical exertion or hot-weather riding.
Ventilation helps decrease the possibility of fogging on the face shield.

Features

1. Everclear No Fog FaceShieId
   Optically clear shield with state-of-the-art fog-free technology. Anti-scratch hardened coating.

2. KwikWick II’ Liner Fabric
   KwikWlCk 11 anti-microbial fabric keeps you cool and dry in warm weather, and warm in cool weather Liner is easily removable and washable.

3. KwikFit
   KwikFit ” cheek pads allow easy on and off of the most common styles of eyeglasses

4. EII•p-Tec'” II Ratchet System
   Easy, Secure, tool-less faceshield changes in seconds.
   Pull the shield back against the eyeport gasket during closing to ensure a proper seal.

5. Aero-Tuned Ventilation
   Five intake ports across the front of the helmet force cool air in while four exhaust vents maximize the movement of hot air out.

6. Face Shield Lock / Vent System
   Shield securely IOCkS in Place. Or use City Mode for a light air flow when riding at low speeds.

7. Advanced Dual-Density EPS:
   Advanced multi-layer EPS provides efficient energy displacement in key areas. EPS liner throughout the entire chin bar area.

8. Emergency Release System
   Tabs located under the neck roll allow easy removal of the cheek pads by emergency medical personnel thus allowing easier removal of the helmet.

Faceshield Lock & Vent Lever

EVERCLEAR FACESHIELD

• TO OPEN: Unlock the faceshield by pressing your thumb up on the face shield lever until it snaps open. Llft faceshield up.
• CITY MODE: Unlock the face shield by pressing your thumb up on the faceshield lever until it snaps open. Leave open at first detent to provide airflow at low speeds.
• TO CLOSE AND LOCK: Close the faceshield by sliding it down all the way and pressing the faceshield lever until it snaps shut. Test by trying to open the faceshield to make sure it is locked into place.

Emergency Safety

Release System
Locate the emergency labeling on the neck roll. Simply reach under neck roll and grab the release strap, pull at a 45-degree angle toward the front of the helmet. The cheek liner will easily be released from the helmet. This system should only be used by trained medical personnel.

KwikWick II Liner Removal

Cheek Pads Removal

• Occasionally the cheek pads may require removal for washing or replacement.
• First, Remove the Aero Skirt. Second, slide your thumb between the cheek pad and chin bar, and gently tug. Then gently pull the cheek pad away from the inner chin bar to unsnap the three plastic clips.
• Repeat this process for both cheek pads.
• Once both cheek pads are removed you can also remove the crown liner component.
• Reverse this process for installation.

Crown Liner Removal

• Occasionally the crown liner may require removal for washing, replacement or to change sizes.
• First, remove the Cheek Pads.
• At the back of the helmet pull the crown liner away from the shell.
• Pull the crown liner out of the helmet while gently detaching it from the forehead channel.
• Reverse this process for installation.

Aero Skirt Removal

• The pliable Aero Skirt was designed to reduce wind from entering behind the face shield area, specifically to keep your face warmer in cold weather.
• You do however have the option to remove the Aero Skirt for cleaning or for warmer riding conditions.
• TO REMOVE
• Simply tug on the Aero Skirt and it slides out of the rubber trim channel.
• Reverse this process to re-install.

FACESHIELD Replacement

NOTE : THE FACESHIELD CAN ONLY BE REMOVED OR INSTALLED WHEN IN THE FULLY OPENED POSITION!!!
To remove the faceshield, place the helmet in front of you with the eye port facing away. Ratchet the faceshield up to the full,’ open position. Using both hands, push up the Y shape release latchet upward and the shield is able to release out of locking mechanism. Then, with both of your thumbs pushing squarely on the center of the Elip-Tec II, gently pun or “peel” the faceshield away from the home.
To install the faceshield. make sure the faceshield axis (1) and the Stopper (2) are positioned properly as shown in the below picture. Then push the axis (1) first, and then push the stopper (2) strongly so that they can be sat on the right track.
Test the faceshield by opening and closing it several times to verify it is properly installed.

IMPORTANT NOTE:
Be sure to latch up the “Y” release latchet while removing the face shield.

Securing and Wearing Your Helmet

Do not simply pull (the helmet down onto your head like a hat. Your ScorpionEx08 helmet should be worn as follows: Using both hands grab the helmet’s bottom rim while hdding the chin straps with your thumbs. Then “roll” the helmet onto your head starting at the forehead. Continue rolling the helmet on towards the back of the head until it comes to rest with your head fully in contact with the inner lining and cheek pads.

HOW TO USE CHINSTRAP

• Lead chinstrap through eyelets of both rings.
• Curl back and thread through the taller ring with a nylon pun-tab.
• Securely tighten the Strap until comfortable and safe.
• Press and snap buttons together to manage excess straps.

FIRMLY AND SECURELY FASTEN YOUR CHINSTRAP
Check your chinstrap for tightness occasionally as vibration or wind may loosen it.

Cleaning Your Helmet System

• None of the components of your ScormonExo helmet can be damaged by water. All headliners and sweat-wicking cheek pads are machine washable. Wash them with a mild detergent in warm water and allow to air dry. Hand washing is recommended, but machine washing is also permitted. Use the “delicate” cycle to prevent the agitator from damaging the sweat-wicking material covering the liner parts, we recommend placing the parts in a damaged the foam and coverings. The faceshield may be cleaned with
  plastic polish or mild soap and water. The shell of your helmet should be cleaned using only a mild detergent and water. NEVER USE PETROLEUM-BASED CHEMICALS, SOLVENTS, GASOLINE. CLEANING AGENTS OR ADHESIVES to clean the shell, liners, or faceshield Of your helmet. Your helmet shell, liner, and faceshield may be seriously damaged by the use of such products.

Warning
For your safety, It IS Important that you completely read the owner’s manual and all warning labels.

DO NOT

• DO NOT ride without snugly fastening your chinstrap.
• DO NOT clean your helmet with petroleum products, solvents, benzene, thinner or cleaning agents.
• DO NOT paint over your helmet’s finish without totally protecting and isolating the shock-absorbing liner and plastic parts. Your warranty will otherwise be invalidated.
• DO NOT drop your helmet from any height onto a hard surface. This could cause damage to your helmet’s finish and/or decrease its ability to protect u.
• BO NO/31ace your helmet on your motorcycle’s rearview mirror: The sharp pressure from the mirror’s edge will compress and damage the helmet’s shock-absorbing liner.
• DO NOT place your helmet on the motorcycle’s seat or fuel tank. It can easily roll off and hit the ground causing damage to the helmet. It is best to place your helmet on the ground so it cannot fall in any direction.
• DO NOT ride with a scratched faceshield. This can impair your vision, especially at night.
• DO NOT modify any part of your helmet, e.g., drilling the shell or cutting and pressing the shock-absorbing liner. Installation of sound systems, speakers and microphones reduces your helmet’s ability to protect you and is not recommended.
• DO NOT use the helmet again if it has either been dropped or involved in an accident. Replace it even if the damage is not visible to the naked eye.
• DO NOT wear a dark or tinted faceshield (including the retractable SpeedView Sunvisor) in dark or poor visibility riding conditions.
• DO NOT place your headliners and cheek pads in the dryer after washing. Allow them to air dry.
• DO NOT attempt to remove, change or replace your faceshield while riding your motorcycle or ATV.
• DO NOT use paint that requires heat curing.

Warranty

Should you have a warranty claim, please call 888-672-6774 or email warranty@scorpionusa.com during business hours,
NOTE : The warranty is for defects in materials and workmanship only. There is no warranty for the helmets involved in accidents or that have been dropped or impacted.

FAQs

Q: Can the ScorpionEXO R420 Helmet's Bluetooth system be paired with multiple devices simultaneously?

A: The helmet's Bluetooth system typically allows pairing with multiple devices, but it's important to check the user manual for specific details.

Q: What is the weight of the ScorpionEXO R420 Helmet?

A: The weight of the helmet varies depending on the size but typically falls in the range of 3.5 to 4 pounds (1.6 to 1.8 kilograms).

Q: Is the ScorpionEXO R420 Helmet available in different sizes?

A: Yes, the ScorpionEXO R420 Helmet comes in various sizes to ensure a proper fit for different head shapes.

Q: Does the ScorpionEXO R420 Helmet have a sun visor?

A: Yes, the helmet comes with an integrated sun visor that can be easily operated while riding.

Q: How comfortable is the ScorpionEXO R420 Helmet during long rides?

A: The helmet is designed with comfort in mind, featuring a moisture-wicking liner, adjustable ventilation, and a removable and washable interior lining.

Q: What safety features does the ScorpionEXO R420 Helmet offer?

A: The ScorpionEXO R420 Helmet meets safety standards, including DOT certification, and features a polycarbonate shell for impact protection.

Q: Is the ScorpionEXO R420 Helmet compatible with all Bluetooth devices?

A: The helmet is designed to be compatible with most Bluetooth-enabled devices, such as smartphones and GPS units.

Q: How does the Bluetooth feature work in the ScorpionEXO R420 Helmet?

A: The Bluetooth feature in the ScorpionEXO R420 Helmet allows riders to connect their mobile devices to the helmet, enabling hands-free communication, music streaming, and GPS navigation.

Q: Where can I purchase the ScorpionEXO R420 Helmet and find more information?

A: You can purchase the ScorpionEXO R420 Helmet at authorized motorcycle gear retailers and online stores. For more information and detailed specifications, visit the official ScorpionEXO website or contact a local dealer.

Q: Is the ScorpionEXO R420 Helmet suitable for all weather conditions?

A: The helmet is designed to be suitable for a variety of weather conditions, thanks to its adjustable ventilation system and moisture-wicking liner.

Q: How long does the battery of the ScorpionEXO R420 Helmet's Bluetooth system last on a single charge?

A: Battery life can vary, but it usually lasts for several hours of continuous use. The exact battery life depends on usage patterns and settings.

Q: What is the ScorpionEXO R420 Polycarbonate Helmet?

A: The ScorpionEXO R420 Polycarbonate Helmet is a motorcycle helmet designed for street riders, equipped with Bluetooth technology for added convenience.

Download This Manual PDF:ScorpionEXO R420 Polycarbonate Helmet Bluetooth Street Motorcycle User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>