TrippLite N286-10G-SR-C Tripp Lite Optoelectronics User Manual
- June 15, 2024
- tripplite
Table of Contents
TRIPP LITE SERIES
N286-10G-SR-C Tripp Lite Optoelectronics
10GBase-SR SFP+ Transceivers with DDM, OM4, 400M, LC
Models: N286-10G-SR-C, N286-10G-SR-G, N286-10G-SR-A, N286-10G-SR-J
25GBase-SR SFP28 Transceiver with DDM, OM4, 100M, LC
Model: N286-25G-SRS-G
40GBase-ESR4 QSFP+ Transceivers with DDM, OM4, 400M, 12F MPO
Models: N286-40G-ESR4-C, N286-40G-ESR4-G, N286-40G-ESR4-A, N286-40G-ESR4-J
100GBase-SR4 QSFP28 Transceivers with DDM, 100M, 12F MPO
Models: N286-100G-SR4SC, N286-100G-SR4SG, N286-100G-SR4SA, N286-100G-SR4SJ
400GBase-SR8 QSFP-DD Transceivers with DDM, 100M, 16F MPO
Models: N286-400G-SR8-G, N286-400G-SR8-C
1000Base-SX SFP Transceivers with DDM, OM2, 550M, LC
Models: N286-01G-SX-G, N286-01G-SX-A, N286-01G-SX-J, N286-01G-SX-C
Purchased product may differ from image.
PRODUCT REGISTRATION
Register your product today for a chance to win an ISOBAR® surge protector in
our monthly drawing!
Installation
Notes:
- The installation steps outlined below apply to all N286 transceivers listed on the cover page. However, product features will differ. Please reference TrippLite.Eaton.com for more information about the features that apply to your specific model.
- Transceivers are static-sensitive devices that require proper handling. An anti-static ESD wrist strap (such as P999-000, sold separately) should always be used when handling a transceiver.
- Never install a transceiver with cables already connected. Always remove cables prior to installation to avoid damaging the cable, connectors and/or optical interface.
- Installing and uninstalling the transceiver numerous times will shorten its useful lifespan. Do not install and uninstall more times than is necessary.
- Remove the transceiver from its packaging, leaving the dust plugs inserted in the optical bores.
- Gently insert the transceiver into your device’s module socket, pressing on the dust plugs until the transceiver locks into place.
- Verify that the transceiver is locked into place by trying to remove it from the module socket without releasing the latch. If it stays in place, it is properly seated. If it does not, re-insert it, firmly pressing on the dust plugs until it locks into place.
- Once you have verified that the transceiver is securely locked into place, remove the dust plugs from the optical bores and connect your cables.
Note: Save the dust plugs so they can be re-used if you must uninstall and re-install the transceiver.
Warranty and Product Registration
3-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable
instructions, to be free from original defects in material and workmanship for
a period of three (3) years from the date of initial purchase. If the product
should prove defective in material or workmanship within that period, Seller
will repair or replace the product, at its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM
ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER
THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED
BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF
MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an
implied warranty lasts, and some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which vary from jurisdiction to
jurisdiction.)
WARNING: The individual user should take care to determine prior to use
whether this device is suitable, adequate or safe for the use intended. Since
individual applications are subject to great variation, the manufacturer makes
no representation or warranty as to the suitability or fitness of these
devices for any specific application.
Product Registration
Visit TrippLite.Eaton.com/warranty
today to register your new product. You’ll be automatically entered into a
drawing for a chance to win a FREE Eaton Tripp Lite series product!
No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
FCC Notice, Class A
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense. The user
must use shielded cables and connectors with this equipment. Any changes or
modifications to this equipment not expressly approved by Eaton could void the
user’s authority to operate this equipment.
WEEE Compliance Information for Eaton Customers and Recyclers (European
Union)
**** Under the Waste Electrical and Electronic Equipment (WEEE) Directive and
implementing regulations, when customers buy new electrical and electronic
equipment from Eaton, they are entitled to:
- Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
- Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this
equipment can reasonably be expected to cause the failure of the life support
equipment or to significantly affect its safety or effectiveness is not
recommended.
Eaton has a policy of continuous improvement. Specifications are subject to
change without notice. Photos and illustrations may differ slightly from
actual products.
Eaton is a registered trademark.
All trademarks are property of their respective owners.
Powering Business Worldwide
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
© 2023 Eaton
All Rights Reserved
Publication No. 23-06-067 / 93-47EA_revA
June 2023
Documents / Resources
|
TrippLite N286-10G-SR-C Tripp Lite
Optoelectronics
[pdf] User Manual
N286-10G-SR-C, N286-10G-SR-G, N286-10G-SR-A, N286-10G-SR-J, N286-25G-SRS-G,
N286-40G-ESR4-C, N286-40G-ESR4-G, N286-40G-ESR4-A, N286-40G-ESR4-J, N286-100G-
SR4SC, N286-100G-SR4SG, N286-100G-SR4SA, N286-100G-SR4SJ, N286-400G-SR8-G,
N286-400G-SR8-C, N286-01G-SX-G, N286-01G-SX-A, N286-01G-SX-J, N286-01G-SX,
N286-10G-SR-C Tripp Lite Optoelectronics, N286-10G-SR-C, Tripp Lite
Optoelectronics, Lite Optoelectronics, Optoelectronics
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>