Shangjian Technology AS03 WiFi Mini Camera User Manual

Shangjian Technology AS03 WiFi Mini Camera

Product Information

Specifications:

• Product Name: AS03
• App Name: iWFCam
• Features: Night vision, magnetic suction, remote access
• Power: On/Off button
• Indicator Lights: Red and blue lights
• Connection Range: Up to 10 meters

Product Usage Instructions

Downloading the App:

To use the AS03 camera, you need to download the iWFCam software. Follow the instructions below based on your phone’s operating system:

For Apple Phones:

1. Go to the App Store on your Apple phone.
2. Search for the app name “iWFCam”.
3. Download and install the iWFCam software.

For Android Phones:

1. Open your cell phone browser.
2. Scan the QR code below using your phone’s camera:
3. Select “Direct Download Android APK” to download the iWFCam software.
4. Install the downloaded software.

Powering On and Off:

To turn on the AS03 camera, follow these steps:

• Long press the “ON/OFF” button for about 3 seconds.
• The red light will stay on and the blue light will slowly flash.

To turn off the camera, follow these steps:

• Long press the “ON/OFF” button for about 3 seconds.

Connecting to the Network:

If there is no network connection, follow these steps:

1. Long press the “ON/OFF” button for about 3 seconds to put the camera into standby mode.
2. Open the phone’s WLAN settings page and connect to the WiFi signal with the name “BH***”.
3. Click “Use” when prompted that the current WLAN is not available for Internet access.
4. Return to the main page of the phone.
5. Open the installed iWFCam app and make sure the phone stays connected to the camera’s WiFi.
6. Wait for the pop-up window or manually search for and add the camera in the app.
7. After adding the camera, click “Cancel” and then “Skip” to directly watch the live screen and make camera settings.

Remote Connection Settings:

To access the camera remotely, follow these steps:

1. When the camera is online in the app, click the Settings button at the bottom right corner of the camera view.

Frequently Asked Questions (FAQ):

• Q: How do I download the iWFCam software?
  A: To download the iWFCam software, follow the instructions provided in section 1 of the user manual.

• Q: How do I power on and off the AS03 camera?
  A: To power on the camera, long press the “ON/OFF” button for about 3 seconds. The red light will stay on and the blue light will slowly flash. To power off the camera, long press the “ON/OFF”  button for about 3 seconds.

• Q: How do I connect the camera to the network?
  A: Follow the steps provided in section 3 of the user manual to connect the camera to the network.

• Q: How do I access the camera remotely?
  A: To access the camera remotely, follow the steps provided in section 4 of the user manual.

Download the software iWFCam

For Apple phones, please go to the APP Store and search for the app name “iWFCam”. APP installation of “iWFCam” for Android phones, please use your cell phone browser to scan the following code Scan the QR code below and select “Direct Download Android Apk” to download and install the software. Installation” to download and install the software.

Please make sure that the distance between the cell phone and the camera does not exceed the 10 meter range

Products

• Power on: Long press (OFF) on/off button for about 3 seconds, red light always on, blue light  Slowly flashing. Shutdown: Long press (OFF) button for about 3 seconds to shutdown
• Reset Button: When the camera is turned on, press and hold the (MODE) button for about 3 seconds, and you will hear a “thud”. “The camera will automatically reset and reboot to the initial state. to the initial state
• TF card slot : Insert the memory card to save  the recording files.
• Charging: Connect to 5V/1A USB power supply for charging, the orange indicator light is always on when charging. When charging, the orange indicator light is always on, when full of orange,  the indicator light is off

Indicator Description

1. No network connection [AP mode]: red  light is always on, blue light flashes slowly
2. Remote mode [IP mode] is connected to the WiFi network: red light is always on, the Blue light is always on.
3. Remote mode [IP mode] is not  connected to the network: indicator light flashes fast
4. Indicator light can be turned on/off in APP.

No network connection

1. Long press the (OFF) ON/OFF button for about 3 seconds to put the camera into standby mode

2. Open the settings (as in Figure 1) into the phone’s WLAN settings page to find the WiFi signal with the name BH*** (as in Figure 2) and connect to it (that is, switch the phone’s connected WiFi to the camera’s WiFi signal) (as in Figure 3)

3. The WLAN setting page will pop up “The current WLAN is not available for Internet access. Click Use (as in Figure 4)

4. In the upper left corner of the WLAN settings page click to return to the main page of the phone.  (As shown in Figure 5)
   You can refer to the following pictures

5. Open the previously installed APP(iWFCam) (as in Figure 6) to make sure the phone stays connected to the camera’s WiFi, after connecting the camera’s WiFi, please wait patiently for the pop-up window, or you can search manually (as in Figure 7) Add the camera (as in Figure 8) and show it online, you can also refresh it manually. (As in Figure 9) After the APP main page will pop up (As in Figure 10) Click Cancel (as in Figure 11) Click Skip, at this point click in to directly watch the live screen and make some settings for the camera (Figure 12).
   You can refer to the following pictures
   You can refer to the following pictures

Remote connection settings

1. When the APP camera is online (as in Figure 13), click the Settings button at the bottom right corner of the camera view in the APP (as in Figure 14)
   Go to Advanced Settings (Figure 15), go to WiFi in Advanced Settings, Connect and Configure WiFi (Figure 16), select the WiFi in use at your home and enter the correct WiFi password (Figure 17) then  WiFi and enter the correct WiFi password (as in Figure 17) and then Click Confirm
   You can refer to the following pictures

2. Wait for the camera to update and reboot the device (Figure 18) Click to return to the APP main page (Figure 18)r cell phone to monitor anytime  and anywhere (Figure 20)
   When the camera shows online again, it means that the remote mode has been set up  successfully (as in Figure 19), you will be able to open the cell phone monitoring anytime, anywhere (as in Figure 20)
   You can refer to the following pictures

Description of the interface display

Sleep function

1. Set the camera “sleep” function, when the camera is successfully connected to the network  After the camera is successfully connected to the network, turn on the hibernation mode in the advanced configuration (Figure 21)
   In the Hibernation Set on/off in the hibernation mode page (as in Figure 22) or set on/off in the main page of APP (as in Figure 213) When you don’t use or watch the product, the product willautomatically enter hibernation mode to achieve a longer working time.

2. When you turn off the hibernation mode, it has all the normal WiFi camera’s functions and also  no longer performs low power consumption

Note:

1. When connecting, please make sure the  distance between the camera and router is not more than 10 meters away from the router.
2. Only 2.4G WiFi is supported and the name and password are composed of letters or numbers. numbers, do not support WiFi names and passwords containing Chinese characters and special symbols.
   WiFi names and passwords containing Chinese  characters and special symbols are not supported

Encrypting the camera

You can add a password for the camera in the APP, the default password of the camera is 8888.  The default password of the camera is 8888, if you change the password and forget it, you can reset the camera to the default password 8888. the  camera back to the default password 8888

About motion detection alarm (if this function is required)

If you have purchased a camera with the  “Hibernate” function, you need to turn off the “Hibernate” mode to use the motion detection alarm function. “Hibernate” mode to use the motion detection alarm function; once you turn off the If you have purchased a camera with the “Hibernate” function, you need to turn off the “Hibernate” mode to use the motion detection alarm function; once you turn off the “Hibernate” mode, you cannot realize the low power consumption performance.

Troubleshooting

1. If you change the network environment, please reset the camera first, and then re-configure the WiFi. If the camera does not recognize the memory card, please replace the memory card or
2. If the camera does not recognize the memory card, please replace the memory card or format it before using it. If the camera does not recognize the memory card, please replace the memory card or format it before use.
3. The hibernation mode will only take effect when the camera is connected to the Internet [IP mode]. AP mode will not sleep.
4. Before shutting down the camera, please stop the video recording on the app, so as not to lose or damage the last video file without saving it. Before shutting down the camera, please stop the video recording on the app, so as not to lose the last video file and damage it.
5. The camera will have a certain amount of heat in the work, but does not affect the performance, you can rest assured use.
6. If the display shows the wrong access password: please reset the camera to recover to the default password 8888.
7. Please access the 5V/1A USB charger to charge, do not access Do not connect to a power supply with a voltage greater than 5V for charging.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or  more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different.  from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE : This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter

RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of  20cm the radiator your body. This device and its antenna(s) must not be co-located or operate in conjunction with any other antenna or  transmitter

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>