YAMATIC GUN A001KA Pressure Washer Gun Instruction Manual
- June 15, 2024
- YAMATIC
Table of Contents
YAMATIC GUN A001KA Pressure Washer Gun
Assembly Instructions
NOTE:
We’re here to help!
Check for visible shipping damage before using. Shipping damage may cause problems in the operation of this unit. Please Message YAMATIC POWER CENTER STORE immediately if there are missing or damaged parts.
If you encounter any other issues or have any questions regarding your new product, please also contact our helpful Customer Support Team.
Your satisfaction is our goal!
Specification
- Working pressure: Rated 4000 PSI / Max 4500 PSI
- Gallon Per Min. : 8 GPM
- Working temperature: 35 °F -140 °F / 0°C -60°(
- Quality ABS, solid brass, steel material
- 3/8″ swivel inlet connector
Package included
- 1 x Pressure washer gun and wand kit
- 2 x Pressure washer adapters
- 5 x Pressure washer spray nozzle tips
- 1 x Teflon tape
ABOUT YAMATIC
Focused on high-end manufacture of power washer and engineering firm over 20
years.
Exciting your pressure washing job and counting on industry engineering.
Service you with real quality and real specification
-
1/4″ Male NPT – 1/4″ Socket
-
3/8 Socket – M22-14mm Male
-
5 Spray Nozzle Tips(0°, 15°, 25°, 40°, 60°
**Connect with the spray nozzle tips:
**
Connect with the extension wand:
Connect to M22-14mm connector pressure washer hose:
3/8 Socket – M22-14mm Male
Connect directly to 3/8″ socket connector pressure washer hose:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>