REMINGTON MB4700 Beard Trimmer User Manual

REMINGTON MB4700 Beard Trimmer

Specifications

• Model: MB4700
• Power Source: Rechargeable Battery
• Battery Life: Up to 120 minutes
• Charging Time: 1 hour
• Cutting Length Settings: 0.5mm – 20mm
• Blade Material: Stainless Steel
• Waterproof: Yes

Product Usage Instructions

Charging the Trimmer

1. Connect the charging cable to the trimmer and plug it into a power source.
2. Ensure the trimmer is turned off.
3. The charging indicator light will turn on, indicating that the trimmer is being charged.
4. Allow the trimmer to fully charge for approximately 1 hour.
5. Once fully charged, disconnect the charging cable from the trimmer.

Trimming Your Beard

1. Make sure your beard is dry and free from any tangles.
2. Select the desired cutting length by adjusting the cutting length settings on the trimmer.
3. Turn on the trimmer by pressing the power button.
4. Gently move the trimmer against the direction of hair growth, starting from the neck and moving upwards.
5. Continue trimming evenly across your beard, paying attention to the desired shape and style.
6. For more precise trimming, use the provided comb attachment.
7. After use, turn off the trimmer and clean the blades using the included brush.

Cleaning and Maintenance
Regular cleaning and maintenance will ensure optimal performance and longevity of the trimmer.

1. Ensure the trimmer is turned off and disconnected from any power source.
2. Remove the comb attachment and tap it gently to remove any loose hairs.
3. Detach the blade assembly by pressing the release button and clean it using the provided brush.
4. Rinse the blade assembly under running water to remove any remaining hair or debris.
5. Dry the blade assembly thoroughly before reattaching it to the trimmer.
6. Apply a small amount of lubricating oil to the blades to maintain their sharpness.
7. Store the trimmer in a cool and dry place when not in use.

Frequently Asked Questions (FAQ)

Q: How long does the battery last?
A: The battery life of the MB4700 Beard Trimmer is up to 120 minutes on a full charge.

Q: Can I use the trimmer while it is charging?
A: No, it is not recommended to use the trimmer while it is charging. Always ensure it is fully charged before use.

Q: Is the trimmer waterproof?
A: Yes, the MB4700 Beard Trimmer is waterproof. It can be safely used in the shower or rinsed under running water for easy cleaning.

Q: How often should I clean the trimmer blades?
A: It is recommended to clean the trimmer blades after each use to maintain optimal performance and prevent hair buildup.

Please note! Failure to follow the instruction booklet can permanently damage your trimmer.
All personal care items, such as shavers, hair clippers or personal groomers, that have a rechargeable battery, need regular cleaning to maintain the battery run-time. If you are experiencing charging or battery run-time issues it is probably time to double-check the Care and Maintenance section of the instructions. Refer to the product manual for full instructions If you have mislaid the manual, download it from the Amazon page or User Manuals | Remington (Remington-europe.com) This is a more high-tech beard trimmer than the standard mechanical trimmer so please read the IB to get the most from your new product. Key things from the instructions to keeping your trimmer in good condition are.

TIPS FOR BEST RESULTS

• Your beard, moustache or sideburn hair should be dry.
• Avoid applying lotions before use.
• If you are trimming for the first time, start with the adjustable comb set to its maximum length position.

CARING FOR YOUR TRIMMER

Never rinse, wash or otherwise subject this product to liquid whilst the charger is connected.

1. For best results, keep the trimmer running while rinsing it under the tap.
2. For more thorough cleaning the blades can be easily removed to wash any hair trimmings from the blades.
3. Push the top of the blade away from the trimmer body using your thumb.
4. Wash, then refit the blade.
5. Place a small drop of cutter or sewing machine oil onto the blades at each end and at the middle point of the blades. Turn the unit on for a few seconds to distribute the oil then turn off and wipe off excess oil.

SWITCHING YOUR TRIMMER ON AND OFF

Waking up
Providing the travel lock has not been set to the locked position, your trimmer will wake automatically when you pick it up:

• The display will come on.
• The buttons will light up.
• The comb will move to the last selected length setting.

Note: Your trimmer will go into energy-saving mode if it has not been used for several days. Use the on/off button to reactivate it.

Stopping and starting your trimmer

• To start your trimmer, press the on/off button.
• To stop your trimmer, press the on/off button again.

Hibernate
To place your trimmer into hibernate mode, press and hold the on/off button.

• The display will go out.
• The buttons will go out.
• The comb will fully retract.

For 20 seconds, your trimmer will not respond to touch signals. However, you can activate your trimmer during this time by pressing the on/off button. After 20 seconds, picking up your trimmer will wake it up again.

Auto-off
If left unattended your trimmer will auto shut down after some time. Your trimmer will wake up automatically when picked up.

Travel lock
To prevent your trimmer from accidentally switching on during travel, storage, etc. slide the travel lock switch to the lock @ position. This will deactivate the touch control features of your trimmer. To reactivate, slide the lock to the unlocked @position. The travel lock can also be set to the lock position to switch your trimmer off.

ADJUSTING THE CUTTING LENGTH OF YOUR TRIMMER

Your trimmer can be adjusted manually in 0.1 mm increments. It can also store and recall the last four trimming lengths used (Profiles).

Adjusting manually

1. Use the up and down buttons to manually adjust the cutting length. Tap the appropriate button to move the comb up or down in 0.1 mm increments.
2. Hold your finger on the button to move the comb quickly.
3. The display will show the selected length setting.
   Note that the length settings cannot be changed when the trimmer is running.

Using profiles
When you adjust the comb length and then operate your trimmer the length setting will automatically be stored in profile one. Your trimmer will store the four most recently used settings in the order of the most recently used. This allows you to recall the settings you use most often. If all four profile locations have a setting stored and then you make a new cutting length adjustment (one that has not been previously stored) the oldest profile will be deleted and the new setting will be stored.

To recall a profile:

1. Ensure that the trimmer is stopped. Tap the Profiles button
2. Tap the up and down buttons to select a profile. The display will show the cutting length, and 1, 2, 3 or 4 horizontal bars to represent profile 1, profile 2, etc.
3. Tap the profile button again to select that profile.
4. The comb will then move to the position stored in the selected profile.

To exit profile mode:
To exit without selecting a profile, either press the on/off button or don’t press any button for 5 seconds. Profile mode will be exited without any changes being made to the comb length setting.

References

• Remington - EST. NEW YORK 1937 | Haircare & Personal Care Appliances for Men & Women
• User Manuals | Remington

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>