MECANIK MO3 Reflex Sight User Manual

: June 15, 2024
: MECANIK

Table of Contents

MECANIK MO3 Reflex Sight
INTRODUCTION
OVERVIEW
TECHNICAL SPECIFICATION
OPERATION
MAINTENANCE
MECANIKTM OPTIC GLOBAL WARRANTY POLICY (USA & CANADA EXCLUDED)
LIMITATIONS OF WARRANTY
LIMITATION OF LIABILITY
WARRANTY SERVICE PROCEDURE
MECANIK OPTIC GLOBAL WARRANTY POLICY (USA & CANADA)
WARRANTY SERVICE PROCEDURE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MECANIK MO3 Reflex Sight

MECANIK-MO3-Reflex-Sight-PRODUCT

INTRODUCTION

Open Reflex Optic Sights have proven to be invaluable in achieving quick target acquisition. They provide the greatest hit probability on targets by allowing shooters to stay focused on the target. Shooting with both eyes open allows the shooter to remain situationally and environmentally aware of what is going on around them at all times. MECANIKTM red dot sights increase the shooter’s confidence by providing an accurate aiming platform. We designed our MO3 sights to meet the demands of firearm-using professionals, and competition shooters while also incorporating state-of-the-art technology. The unique design of our red dot optic’s outer frame provides ease of racking the pistol with a single hand if needed. This sight is made to endure and work in the most demanding operational and environmental conditions. For these reasons our optics are relied upon by users across the globe. MECANIKTM MO3 Reflex sights are used not only for competitions but also for home and self-defence purposes.We are proud to give you an efficient, reliable, and rugged electronic sighting system. Welcome to the superior way of doing things with MECANIKTM.

OVERVIEW

MECANIK-MO3-Reflex-Sight-FIG-2

TECHNICAL SPECIFICATION

MECANIKTMMO3 REFLEX SIGHT

OPTICAL SPECIFICATIONS

MECANIKTM MO3 REFLEX SIGHT

PHYSICAL SPECIFICATIONS

MOA: One dial mark yields one MOA of adjustment. One MOA = 1.05 inches @100 yards.
NVD: Night Vision Device. Battery life: Values valid at room temperature for a quality battery.

EXTREME CONDITIONS
Extreme heat (moist or dry): No special procedures required. Extreme cold: Extreme cold might shorten battery life. High altitudes: No special procedure required.

KEY FEATURES

6 MOA Red Dot Size
Trijicon RMR ® FOOTPRINT
Designed for use with handguns, rifles, or shotguns
Large optic window area 29×24 mm
Automatic shutoff after 3 min
1 MOA adjustable elevation & windage
Waterproof & shockproof housing
Manual brightness adjustment
Parallax Free
MAIS (Motion Activated Illumination System)

CONTENTS

MECANIKTM MO3 Reflex sight
2 mm aluminium interface
Protective cover
(2) #6-32 UNC screw
CR2032 Battery
Cleaning cloth
Owner’s Manual
MECANIKTM Multi-function Wrench (Mounting/ Windage/Elevation Adjustment)
Battery Cap Tool

OPERATION

WARNING: Before beginning remove all live ammunition, loaded magazines and other firearms from the working area. Ensure the firearm is completely unloaded by following the unloading procedures in the firearm’s manual.

INSTALL THE BATTERY
To install the battery, first unscrew the battery cap by turning it in the counterclockwise direction as shown in Figure 2.1. Insert the battery with the negative end toward the sight as shown in Figure#2.2

NOTE: For storage of sight, remove the battery.

TURN ON/OFF AND ADJUST INTENSITY

Pressing the (+) switch will turn the sight ON. The sight comes with 10 settings. Pressing the (+) switch will increase the dot intensity. Pressing the (-) switch will decrease the dot intensity. Pressing the (-) switch for more than 3 seconds will turn the unit OFF.The MECANIKTM MO3 utilizes MAIS (Motion Activated Illumination System). If no motion is detected for 3 minutes, the sight will automatically turn off to conserve battery life. As soon as the sight senses motion, it will automatically turn on to the last brightness setting by default.

INSTALL THE MECANIK OPTIC SIGHT

WARNING: Prior to installation, battery change, cleaning or maintenance, ensure that the firearm is unloaded with the safety on and pointed in a safe direction. The MO3 comes with 1 set of screws (#6-32 UNC). Before installing the MECANIK optic sight, be sure it fits properly into the sockets for your firearm. Use the Torx key (T10) to tighten. If raising the optic sight is needed, an aluminium interface in the box content can be used.

The included screws may or may not be compatible with other platforms, and you should consult the firearms manufacturer for compatibility information.

Note: If your firearm is not already equipped with an optic interface, it may be sold separately.
CAUTION: Do not continue to adjust windage and elevation screws (Figure 2.4- 2.5) if you encounter resistance.

ZEROING OPTIC
Adjust the intensity to a comfortable setting for the red dot to contrast clearly against the target. Use the MECANIKTM tool (FIGURE 1.5) to turn the adjustment screws.

Elevation adjustments dial (FIGURE 2.4)
Turn the elevation adjustment screw clockwise to move the point of impact up (U). Turn the elevation adjustment screw counter-clockwise to move point of impact down. MECANIK-MO3-Reflex-Sight-FIG-6

Windage adjustments dial (FIGURE 2.5)
Turn the windage adjustment screw clockwise to move the point of impact to the right (R). Turn the windage screw counter-clockwise to move the point of impact to the left. Confirm zeroing by firing at least three shots at a zeroing target. Checkpoints of impact to confirm the accuracy and repeat zeroing procedure if required. Ensure the sight is securely installed on the weapon and retighten the screw if necessary.

MAINTENANCE

CAUTION Do not apply pressurized water to the device. Water infiltration will destroy the LED.
CAUTION If you need to reuse the cleaning cloth you used to clean a Window, make sure the cloth is clean.

Your optic should be thoroughly cleaned and the battery must be removed before storage. Make sure that the storage area is humidity-free, and both the lens and the LED frame have no dust particles stuck on them before storage. Never clean your optic with any type of gun oil.

Danger – Fire Hazard
Risk of injury due to fire, explosion or leakage. Do not disassemble, charge, crush or expose to fire or high temperatures. Do not mix battery brands or mix chargeable and non-chargeable batteries. Warning – Coin Lithium batteries are not interchangeable. Both the diameter and thickness can vary based on the battery designation. While some device battery compartments may be sized in a way that different battery types can fit in the compartment, the capacities will vary by size. Only use the cell designation specified by the manufacturer of your device.

Danger – Battery Hazards

KEEP OUT OF REACH OF CHILDREN. Swallowing a battery may lead to serious injury or death in as little as 2 hours due to chemical burns and potential perforation of the esophagus. If ingestion is suspected immediately call poison control at 800-222-1222. Batteries also present a choking hazard for children and pets. Keep in original package until ready to use. Properly dispose of used batteries immediately per state or battery manufacturer guidelines.

CLEANING OF EXTERIOR SURFACES
To clean the outer surfaces of the device, perform the following operations in order;

Clean the exterior surfaces.
Clean the exterior surfaces by moistening a clean lint-free cloth with warm water.

LENS CLEANING
When cleaning take care to remove any items that could damage or scratch the lens. Wash hands to remove contaminants that could damage or stain the lens. Do not clean if the temperature of the cleaning environment is lower than 10°C. MECANIK optical sights require very little maintenance apart from periodic cleaning of their Lenses. If there are visible particles on the lens, clean it with an optical cleaning brush. Do not touch the lens with your finger. You can then clean the lens with a soft, dry cloth.

MECANIKTM OPTIC GLOBAL WARRANTY POLICY (USA & CANADA EXCLUDED)

MECANIKTM LIMITED LIFETIME WARRANTY FOR SIGHT HOUSING THREE-YEAR OPTIC AND LED WARRANTY This warranty is provided by MECANIKTM for MecanikTM Optics and is an agreement by and between MECANIKTM and the purchaser. MECANIKTM and/or MECANIKTM Importer / Distributer (MID) is the certified service provider of MECANIKTM MO3 in your country. Congratulations on purchasing your MECANIKTM MO3 Reflex sight. Your MECANIKTM optic is covered by our Limited Lifetime Warranty Policy. MECANIKTM will repair defects in material or workmanship associated with the optic without charge to the original purchaser for as long as you own the optic. (This agreement is not transferable and only applies to the original retail purchaser upon presentation of proof of purchase.) This Limited Lifetime Warranty only applies to the metal product housing, and does not apply to the optic and/or illumination system(s). The optic glass and illumination system (electronics and LED) are covered by a 3-year limited warranty. If a warranty-covered defect is found, we will repair or replace the product with a MECANIKTM product of equal or greater value. MECANIKTM/MID reserves the right to substitute the product for similar items if the model returned is unavailable.

THIS IS A REPAIR OR REPLACE WARRANTY, YOUR SOLE REMEDY FOR A DEFECT IN MATERIALS OR WORKMANSHIP OF A MECANIKTM OPTIC IS THE REPAIR OF PARTS OR REPLACEMENT OF THE OPTIC Please visit www.MECANIKTM.com and complete the Product Registration Form within 30 days of purchase to register your MECANIKTM optic.Proof of purchase, including a receipt or invoice, must be provided with your registration and with any warranty claim. To make a repair claim, visit www.MECANIKTM.com and complete the information for instructions on how to return your optic. Do not return your MECANIKTM Optic for service without prior authorization.

LIMITATIONS OF WARRANTY

This warranty does not cover loss, theft, deliberate damage, accidental damage, corrosion, neglect, abuse or unreasonable use, misuse, defects or damage resulting from alterations or modifications to the optic, disassembly beyond the instructions located in the product’s manual (where applicable), normal wear and tear, criminal misuse, negligence, use under the influence of drugs or alcohol, or cosmetic damage that does not hinder the performance of the optic. This warranty is void if the product has been misused, modified, neglected, or disassembled before its return. The included batteries are not covered under the Limited Lifetime Warranty.

The MECANIKTM limited lifetime warranty is voided if any of the following occurs:

If the product is not properly registered,
If the instructions in the manual are not followed,
If the product has been altered, misused, abused, modified, neglected, or disassembled prior to its return,
If the product is lost or stolen,
If a proof of original purchase receipt is not provided,
MECANIKTM MO3 used for range rentals or other similar programs are not eligible,
If interfaces other than the Official Canik Accessory program are used,
If the zeroing and assembly instructions in the manual are not followed,
If a tool other than the one provided by MECANIKTM is used for assembly purposes and damage is caused consequently,
If damage occurs in the lens caused by cleaning with something other than the provided cleaning cloth,
If improper, recharged or corroded batteries have been used in the optic.

To the full extent permissible by applicable law, any importer, distributor or retailer, and their employees, agents, distributors and partners do not make, and are not entitled or authorized to make, any warranty of any kind, express or implied, with respect to the MECANIKTM MO3 optic, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The only limited warranty provided is from MECANIKTM, pursuant to the terms and limitations stated herein. Nothing contained herein shall be interpreted as an implied or express warranty on behalf of MECANIKTM beyond the terms above.

LIMITATION OF LIABILITY

TO THE FULLEST EXTENT ALLOWABLE BY LAW, MECANIKTM DISCLAIMS ALL IMPLIED WARRANTIES AND MAKES NO OTHER EXPRESS WARRANTIES. MECANIKTM SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE PERFORMANCE AND USE OF THE PRODUCTS, EVEN IF MECANIKTM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Please note: MECANIKTM reserves the right to make substitutions on warranty coverage for any reason, including but not limited to available items. If MECANIKTM/MID determines that the optic is not repairable, we will replace the optic with an item of similar features and product class at MECANIKTM’s sole determination and at no replacement cost to you.

WARRANTY SERVICE PROCEDURE

Please visit www.MECANIK.com and complete the Product Registration Form within 30 days of purchase to register your MECANIKTM optic. Proof of purchase, including a receipt or invoice, must be provided with your registration and with any warranty claim.
To make a repair claim, visit www.MECANIK.com and complete the information for instructions on how to return your optic. Do not return your MECANIKTM Optic for service without prior authorization. An Authorized Representative can determine if factory service is required and how to proceed.

AUTHORIZED WARRANTY REPAIR FACILITY
If your MECANIKTM optic must be returned to the authorized warranty repair facility at MECANIKTM, you will be responsible for paying the freight charges to MECANIKTM/MID. Before any item is returned to MECANIKTM/MID, you must get a Return Authorization (RA) number from us. MECANIKTM optics returned to MECANIKTM/MID without a Return Authorization Number (RAN) may be denied warranty service. When the MECANIKTM optic is received by MECANIKTM/MID it will be inspected to determine if it is a proper claim for warranty repair. MECANIKTM/MID will pay the freight charges to return the repaired item to the owner.

MECANIK OPTIC GLOBAL WARRANTY POLICY (USA & CANADA)

MECANIKTM LIMITED LIFETIME WARRANTY FOR SIGHT HOUSING THREE-YEAR OPTIC AND LED WARRANTY This warranty is provided by MECANIKTM A.S.(MECANIKTM) for MecanikTM Optics and is an agreement by and between MECANIKTM A.S. and purchaser. CENTURY ARMS is the certified service provider of MECANIKTM MO3 in the USA. Congratulations on purchasing your MECANIKTM MO3 Reflex sight. Your MECANIKTM optic is covered by our Limited Lifetime Warranty Policy. MECANIKTM will repair defects in material or workmanship associated with the optic without charge to the original purchaser for as long as you own the optic. (This agreement is not transferable and only applies to the original retail purchaser upon presentation of proof of purchase.) This Limited Lifetime Warranty only applies to the metal product housing and does not apply to the optic and/or illumination system(s). The optic glass and illumination system (electronics and LED) are covered by a 3 year limited warranty. If a warranty- covered defect is found, we will repair or replace the product with a MECANIKTM product of equal or greater value. MECANIKTM reserves the right to substitute the product for similar items if the model returned is unavailable.THIS IS A REPAIR OR REPLACE WARRANTY, YOUR SOLE REMEDY FOR A DEFECT IN MATERIALS OR WORKMANSHIP OF A MECANIKTM OPTIC IS THE REPAIR OF PARTS OR REPLACEMENT OF THE OPTIC Please visit www.mecanik.com and complete the Product Registration Form within 30 days of purchase to register your MECANIKTM optic. Proof of purchase, including a receipt or invoice, must be provided with your registration and with any warranty claim. To make a repair claim, visit www.mecanik.com and complete the information for instructions on how to return your optic. Do not return your MECANIKTM Optic for service without prior authorization.

LIMITATIONS OF WARRANTY
This warranty does not cover loss, theft, deliberate damage, accidental damage, corrosion, neglect, abuse or unreasonable use, misuse, defects or damage resulting from alterations or modifications to the optic, disassembly beyond the instructions located in the product’s manual (where applicable), ordinary wear and tear, criminal misuse, negligence, use under the influence of drugs or alcohol, or cosmetic damage that does not hinder the performance of the optic. This warranty is void if the product has been misused, modified, neglected, or disassembled prior to its return. The included batteries are not covered under the Limited Lifetime Warranty. The MECANIKTM limited lifetime warranty is voided if any of the following occurs:

If the product is not properly registered,
If the instructions in the manual are not followed,
If the product has been altered, misused, abused, modified, neglected, or disassembled before its return,
If the product is lost or stolen,
If a proof of original purchase receipt is not provided,
MECANIKTM MO3 used for range rentals or other similar programs is not eligible,
If interfaces other than Official Canik Accessory program are used,
If the zeroing and assembly instructions in the manual are not followed,
If a tool other than the one provided by MECANIKTM is used for assembly purposes and damage is caused consequently,
If damage occurs in the lens caused by cleaning with something other than the provided cleaning cloth,
If improper, recharged or corroded batteries have been used in the optic.

To the full extent permissible by applicable law, any importer, distributor or retailer, and their employees, agents, distributors and partners do not make, and are not entitled or authorized to make, any warranty of any kind, express or implied, concerning the MecanikTM MO3 optic, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The only limited warranty provided is from MECANIKTM, under the terms and limitations stated herein. Nothing contained herein shall be interpreted as an implied or express warranty on behalf of MECANIKTM beyond the terms above.

LIMITATION OF LIABILITY
TO THE FULLEST EXTENT ALLOWABLE BY LAW, MECANIKTM A.S. DISCLAIMS ALL IMPLIED WARRANTIES AND MAKES NO OTHER EXPRESS WARRANTIES. MECANIK TM SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE PERFORMANCE AND USE OF THE PRODUCTS, EVEN IF MECANIKTM HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Please note: MECANIKTM reserves the right to make substitutions on warranty coverage for any reason, including but not limited to available items. If MecanikTM A.S. determines that the optic is not repairable, we will replace the optic with an item of similar features and product class at MECANIKTM’s sole determination and at no replacement cost to you.

WARRANTY SERVICE PROCEDURE

Please visit www.mecanik.com and complete the Product Registration Form within 30 days of purchase to register your MECANIKTM optic. Proof of purchase, including a receipt or invoice, must be provided with your registration and with any warranty claim. To make a repair claim, visit www.mecanik.com and complete the information for instructions on how to return your optic. Do not return your MECANIKTM Optic for service without prior authorization. An Authorized Representative can determine if factory service is required and how to proceed.

AUTHORIZED WARRANTY REPAIR FACILITY
If your MECANIKTM optic must be returned to the authorized warranty repair facility at Century Arms, you will be responsible for paying the freight charges to Century Arms. Before any item is returned to Century Arms, you must get a Return Authorization (RA) number from us.MECANIKTM optics returned to Century Arms without a Return Authorization Number (RAN) may be denied warranty service. When the MECANIKTM optic is received by Century Arms it will be inspected to determine if it is a proper claim for warranty repair. MECANIKTM will pay the freight charges to return the repaired item to the owner.