MECANIK MO1 Micro Reflex Sight User Manual
- June 10, 2024
- MECANIK
Table of Contents
- MECANIK MO1 MICRO REFLEX SIGHT
- INTRODUCTION
- Overview
- Technical Specification
- OPERATION
- MAINTENANCE
- MECANIK OPTIC GLOBAL WARRANTY POLICY (USA & CANADA EXCLUDED)
- MECANIK OPTIC WARRANTY POLICY(USA & CANADA)
- INTRODUCTION
- Overview
- Technical Specification
- OPERATION
- MAINTENANCE
- MECANIK OPTIC GLOBAL WARRANTY POLICY (USA & CANADA EXCLUDED)
- MECANIK OPTIC USA & CANADA WARRANTY POLICY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MECANIK MO1 MICRO REFLEX SIGHT
INTRODUCTION
The MECANIK MO1 Micro Reflex Sight is an open reflex optic sight that provides quick target acquisition. It is designed to increase the shooter’s confidence by providing accurate aiming platform. With both eyes open, the shooter can remain situationally and environmentally aware of what is going on around them at all times. The sight is made to endure and work in the most demanding operational and environmental conditions. It is relied upon by users across the globe for tactical applications, sport shooting, home defense, and competition categories.
Overview
The MECANIK MO1 Micro Reflex Sight comes with the following contents:
- MECANIK red dot sight
- Battery
- Red dot screws
- Cover
- Mecanik tool
The sight has two elevation adjustment dials, two windage adjustment dials and a 3 MOA aiming dot size. It has a clear aperture (Window Dimension) of 22×15.8mm (0.87×0.62 in). The sight is powered by a 3V lithium battery, type CR 2032 which has a battery life of 6.5 years (60,000h) at lowest setting.
Technical Specification
The MECANIK MO1 Micro Reflex Sight has the following technical specifications:
- Operating principle: Reflex collimator sight with LED
- Optical magnification: 1x
- Aiming dot size: 3 MOA
- Dot intensity: Visible against a background luminance of 0.1 to 55 000 lx
- Dot color: Red
- Optical coating: Anti-reflex, all surfaces and high transmission.
- Clear aperture (Window Dimension): 22×15.8mm (0.87×0.62 in)
- Eye relief: Unlimited
- Battery type: 3V lithium battery, type CR 2032
- Battery life – Day time use: 6.5 years (60,000h) at lowest setting
- Power intensity: Auto brightness
- Length sight only: 40.8mm(1.61in)
- Width sight only: 25mm(0.98in)
- Height sight only: 23.5mm(0.93in)
- Weight sight with battery: 20g(0.70oz)
- Housing material: High strength aluminum
- Housing finish and color: Matte black
- Housing anodized: Yes
- Surface treatment: Anodized
- Adjustment range: 100 MOA Total travel
- Temperature range operation: -20°C to +60°C (-4°F to +140°F)
OPERATION
BATTERY INSTALLATION
To install the battery, follow the steps below:
- Remove the battery cover from the bottom of the sight.
- Insert the battery, positive (+) side facing up.
- Replace the battery cover.
Turn On/Off and Adjust the Intensity
To turn on/off the MECANIK MO1 Micro Reflex Sight, press and hold the + or – button for 2 seconds. To adjust the intensity of the dot, press + or – button. The dot intensity is automatically adjusted based on the ambient light conditions.
Install The Mecanik Optic Sight
To install the MECANIK MO1 Micro Reflex Sight, follow the steps below:
- Remove any existing optic sight from your firearm.
- Place the MECANIK MO1 Micro Reflex Sight on the firearm’s mounting plate. Tighten the screws using the MECANIK tool.
ZEROING OPTIC
To zero the MECANIK MO1 Micro Reflex Sight, follow the steps below:
- Set up a target at a distance of 10 yards.
- Fire three rounds at the center of the target.
- Adjust the windage and elevation dials to move the dot to the center of the group.
- Fire three more rounds at the center of the target to confirm zeroing.
MAINTENANCE
CLEANING OF EXTERIOR SURFACES
To clean the exterior surfaces of the MECANIK MO1 Micro Reflex Sight, use a soft cloth or brush. Do not use solvents or abrasive materials to clean the sight.
LENS CLEANING
To clean the lens of the MECANIK MO1 Micro Reflex Sight, follow the steps below:
- Remove any dirt or debris from the lens using a soft brush or cloth.
- Apply lens cleaner to a soft cloth.
- Gently wipe the lens with the cloth.
- Repeat as necessary until the lens is clean.
MECANIK OPTIC GLOBAL WARRANTY POLICY (USA & CANADA EXCLUDED)
The global warranty policy covers defects in materials and workmanship for a period of two years from the date of purchase. The warranty does not cover damage caused by misuse, abuse, or normal wear and tear. To make a warranty claim, contact your local MECANIK dealer or distributor.
MECANIK OPTIC WARRANTY POLICY(USA & CANADA)
The warranty policy for USA and Canada covers defects in materials and workmanship for a period of five years from the date of purchase. The warranty does not cover damage caused by misuse, abuse, or normal wear and tear. To make a warranty claim, contact your local MECANIK dealer or distributor.
INTRODUCTION
Open Reflex Optic Sights have proven to be invaluable in achieving quick
target acquisition. They provide the greatest hit probability on targets by
allowing shooters to stay focused on the target. Shooting with both eyes open
allows the shooter to remain situationally and environmentally aware of what
is going on around them at all times. MECANIK red dot sights increase the
shooter’s confidence by providing on accurate aiming platform. We designed our
sights to meet the demands of firearms using professionals, while also
incorporating state-of-the-art technology. The unique design of our red dot
optic’s outer frame provides ease of racking the pistol with a single hand if
needed. This sight is made to endure and work in the most demanding
operational and environmental conditions. For those reasons our optics are
relied upon by users across the globe.
MECANIK red dot sights continue to be a game-changer in tactical applications,
as well as sport shooting, home
defense, and competition categories.
We are proud to give you the most efficient, reliable, and rugged electronic
sighting system in the world.
Welcome to the superior way of doing things with MECANIK.
Overview
Technical Specification
MECANIK MO1 MICRO REFLEX SIGHT
OPTICAL SPECIFICATIONS
Operating principle:| Reflex collimator sight with LED
Optical magnification:| 1x
Aiming dot size:| 3 MOA
Dot intensity:| Visible against a background luminance of 0.1 to 55 000 lx
Dot color:| RED Wavelength: 655 ± 15 nm
Optical coating:| Anti-reflex, all surfaces and high transmission.
Clear aperture (Window Dimension):| 22×15.8mm (0.87×0.62 in)
POWER SOURCE
Eye relief:| Unlimited
Battery type:| 3V lithium battery, type CR 2032
Battery life – Day time use:| 6.5 years (60,000h) at lowest setting
Power intensity:| Auto brightness
PHYSICAL SPECIFICATIONS
Length sight only:| 40.8mm(1.61in)
Width sight only:| 25mm(0.98in)
Height sight only:| 23.5mm(0.93in)
Weight sight with battery:| 20g(0.70oz)
Housing material:| High strength aluminum
Housing finish and color:| Matte black
Housing anodized:| Yes
Surface treatment:| Anodized
Adjustment range:| 100 MOA Total travel
ENVIRONMENTAL SPECIFICATIONS
Temperature range operation:| -30°C to +60°C (-22°F to +140°F)
- MOA : One dial mark yields one MOA of adjustment.
- One MOA = 1.05 inches @100 yards.
- Battery life : Values valid at room temperature for a quality battery
EXTREME CONDITIONS
- Extreme heat (moist or dry): No special procedures required.
- Extreme cold : Extreme cold might shorten battery life.
- High altitudes : No special procedure required.
Key features
- Designed for use with handguns, rifles, or shotguns.
- Automatic brightness control
- MAIS (Motion Activated Illumination System)
- Highly efficient point source LED emitter, for up to 6 years of runtime
- Pre-zeroed from the factory, optimized for most optics-ready pistols
- Integrated backup rear sight (some models) for co-witnessing with your front iron sight
- 1 MOA adjustable elevation & windage
- O-ring sealed for waterproof performance
- Shockproof construction withstands impact
Contents
- Protective Cover
- 0.7mm height interface
- (2) M4 x 10mm screws
- CR2032 Battery
- Cleaning Cloth
- Owners Manual
- Mecanik Multi-function Wrench
(Mounting/ Windage/Elevation Adjustment)
OPERATION
WARNING : Before beginning remove all live ammunition, loaded magazines and other firearms from the working area. Ensure the firearm is completely unloaded by following the unloading procedure in the firearm’s manual.
Install the Battery
Insert battery (Figure 2) with the negative end toward the sight as shown in
Figure#2.
NOTE : For storage of sight, remove the battery.
Turn On/Off and Adjust Intensity
The MECANIK MO1 utilizes MAIS (Motion Activated Illumination System). If no
motion is detected for 3 minutes, the sight will automatically turn off to
conserve battery life. As soon as the sight senses motion, it will
automatically turn on to the middle brightness setting by default.
A photosensitive sensor is built in to provide a bright dot relative to
ambient light in all conditions, day or night. When the battery needs
replacing dot will blink 10 times and then back to the current brightness
level. This low battery alert reminds you to replace the battery.
Install The Mecanik optic sight
WARNING : Prior to installation, battery change, cleaning or maintenance,
ensure that the firearm is unloaded with the safety on and pointed in a safe
direction.
The MO1 comes with 1 set of screws (M4x10mm) and one 0.7mm interface. Before installing the MECANIK optic sight, be sure it fits properly into the sockets for your firearm. Use Torx key (T20) to tighten. The included screws may or may not be compatible with other platforms, and you should consult the firearms manufacturer for compatibility information.
Zeroing
CAUTION : Do not continue to adjust windage and elevation screws figure
2.2 if you encounter resistance.
Adjust the intensity to a comfortable setting for the red dot contrast clearly
against the target.
Use the MECANIK tool (5) to turn the adjustment screws.
Windage adjustments dial fıgure 2.3 Turn windage adjustment screw clockwise to move point of impact to the right (R). Turn windage screw counter-clockwise to move point of impact to the left.
Elevation adjustments dial (FIGURE 2.2)
Turn elevation adjustment screw (FIGURE 2.2 ) clockwise to move point of
impact up (U). Turn elevation adjustment screw (FIGURE 2.2) counter-clockwise
to move point of impact down. Confirm zeroing by firing at least three shots
at a zeroing target. Check points of impact to confirm accuracy and repeat
zeroing procedure if required. Ensure the sight is securely installed on the
weapon and retighten the screw if necessary.
Your optic should be thoroughly cleaned and the battery must be removed before
storage. Make sure that the storage area is humidity-free, and both the lens
and the LED frame have no dust particles stuck on them before storage. Never
clean your optic with any type of gun oil.
MAINTENANCE
CAUTION Do not apply pressurized water to the device. Water infiltration
will destroy the LED.
CAUTION If you need to reuse the cleaning cloth you used to clean a
Window, make sure the cloth is clean.
CAUTION Clean only with MECANIK Optical Cleaning Liquid.
CLEANING OF EXTERIOR SURFACES
To clean the outer surfaces of the device, perform the following operations in
order;
- Clean the exterior surfaces from dirt and dust.
- Clean the exterior surfaces by moistening a clean lint-free cloth with warm water.
LENS CLEANING
Remove all jewelry from arms and fingers before cleaning. Cleanse your hands
from skin oils by washing them carefully. Do not clean if the temperature of
the cleaning environment is lower than 10°C. MECANIK optical sights require
very little maintenance apart from periodic cleaning of their Lenses. If there
are visible particles on the lens, clean it with an optical cleaning brush. Do
not touch the lens with your finger. You can then clean the lens with a soft,
dry cloth. For a more effective cleaning, you can clean your lens with 2 drops
of MECANIK Optical Cleaning liquid dropped on the lens cleaning cloth.
Danger – Battery Hazards
KEEP OUT OF REACH OF CHILDREN. Swallowing a battery may lead to serious injury
or death in as little as 2 hours due to chemical burns and potential
perforation of the esophagus. If ingestion is suspected immediately call
poison control at 800-222-1222.
Batteries also present a choking hazard for children and pets. Keep in
original package until ready to use. Properly dispose of used batteries
immediately per state or battery manufacturer guidelines.
Follow all warnings and instructions provided by the battery manufacturer.
Danger – Fire Hazard
Risk of injury due to fire, explosion or leakage. Do not disassemble, charge,
crush or expose to fire or high temperatures. Do not mix battery brands or mix
chargeable and non-chargeable batteries. Warning – Coin Lithium batteries are
not interchangeable. Both the diameter and thickness can vary based on the
battery designation. While some device battery compartments may be sized in a
way that different battery types can fit in the compartment, the capacities
will vary by size. Only use the cell designation specified by the manufacturer
of your device or identified in the list provided above.
MECANIK OPTIC GLOBAL WARRANTY POLICY (USA & CANADA EXCLUDED)
MECANIK LIMITED LIFETIME WARRANTY FOR SIGHT HOUSING THREE-YEAR OPTIC AND LED WARRANTY
This warranty is provided by MECANIK for Mecanik Optics and is an agreement by
and between MECANIK and purchaser. MECANIK and/or MECANIK Importer /
Distributer (MID) is the certified service provider of MECANIK MO1 in your
country. Congratulations on purchasing your MECANIK MO1 Reflex sight. Your
MECANIK optic is covered by our Limited Lifetime Warranty Policy. MECANIK will
repair defects in material or workmanship associated with the optic without
charge to the original purchaser for as long as you own the optic. (This
agreement is not transferable and only applies to the original retail
purchaser upon presentation of proof of purchase.) This Limited Lifetime
Warranty only applies to the metal product housing, and does not apply to the
optic and/or illumination system(s). The optic glass and illumination system
(electronics and LED) are covered by a 3-year limited warranty. In the event
that a warranty-covered defect is found, we will repair or replace the product
with a MECANIK product of equal or greater value. MECANIK/MID reserves the
right to substitute the product for similar items if the model returned is
unavailable. THIS IS A REPAIR OR REPLACE WARRANTY, YOUR SOLE REMEDY FOR A
DEFECT IN MATERIALS OR WORKMANSHIP OF A MECANIK OPTIC IS THE REPAIR OF PARTS
OR REPLACEMENT OF THE OPTIC Please visit
www.MECANIK.com and complete the Product
Registration Form within 30 days of purchase to register your MECANIK optic
Proof of purchase, including a receipt or invoice, must be provided with
your registration and with any warranty claim.
To make a repair claim, visit www.MECANIK.com and
complete the
information for instructions on how to return your optic. Do not return
your MECANIK Optic for service without prior authorization.
LIMITATIONS OF WARRANTY
This warranty does not cover loss, theft, deliberate damage, accidental
damage, corrosion, neglect, abuse or unreasonable use, misuse, defects or
damage resulting from alterations or modifications to the optic, disassembly
beyond the instructions located in the product’s manual (where applicable),
normal or ordinary wear and tear, criminal misuse, negligence, use under the
influence of drugs or alcohol, or cosmetic damage that does not hinder the
performance of the optic. This warranty is void if the product has been
misused, modified, neglected, or disassembled prior to its return. The
included batteries are not covered under the Limited Lifetime Warranty.
The MECANIK limited lifetime warranty is voided if any of the following
occurs:
- If the product is not properly registered,
- If the instructions in the manual are not followed,
- f the product has been altered, misused, abused, modified, neglected, or disassembled prior to its return,
- If the product is lost or stolen,
- If a proof of original purchase receipt is not provided,
- MECANIK MO1 used for range rentals or other similar programs are not eligible,
- If interfaces other than Official Canik Accessory program are used,
- If the zeroing and assembly instructions in the manual are not followed,
- If a tool other than the one provided by MECANIK is used for assembly purposes and damage is caused consequently, If damage occurs in the lens caused by cleaning with something other than the provided cleaning cloth, If improper, recharged or corroded batteries have been used in the optic.
To the full extent permissible by applicable law, any importer, distributor or retailer, and their employees, agents, distributors and partners do not make, and are not entitled or authorized to make, any warranty of any kind, express or implied, with respect to the MECANIK MO1 optic, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. The only limited warranty provided is from MECANIK, pursuant to the terms and limitations stated herein. Nothing contained herein shall be interpreted as an implied or express warranty on behalf of MECANIK beyond the terms above. LIMITATION OF LIABILITY TO THE FULLEST EXTENT ALLOWABLE BY LAW, MECANIK DISCLAIMS ALL IMPLIED WARRANTIES AND MAKES NO OTHER EXPRESS WARRANTIES. MECANIK SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE PERFORMANCE AND USE OF THE PRODUCTS, EVEN IF MECANIK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
WARRANTY SERVICE PROCEDURE
Please visit www.MECANIK.com and complete the
Product Registration Form within 30 days of purchase to register your MECANIK
optic. Proof of purchase, including a receipt or invoice, must be provided
with your registration and with any warranty claim. To make a repair claim,
visit www.MECANIK.com and complete the information
for instructions on how to return your optic. Do not return your MECANIK Optic
for service without prior authorization. An Authorized Representative can
determine if factory service is required and how to proceed.
AUTHORIZED WARRANTY REPAIR FACILITY
If your MECANIK optic must be returned to the authorized warranty repair
facility at MECANIK, you will be responsible to pay the freight charges to
MECANIK/ MID. Before any item is returned to MECANIK/MID, you must get a
Return Authorization (RA) number from us. MECANIK optics returned to
MECANIK/MID without a Return Authorization Number (RAN) may be denied warranty
service. When the MECANIK optic is received by MECANIK/MID it will be
inspected to determine if it is a proper claim for warranty repair.
MECANIK/MID will pay the freight charges to return the repaired item to the
owner.
MECANIK OPTIC USA & CANADA WARRANTY POLICY
MECANIK LIMITED LIFETIME WARRANTY FOR SIGHT HOUSING THREE-YEAR OPTIC AND
LED WARRANTY
This warranty is provided by MECANIK A.S.(MECANIK) for Mecanik Optics and is an agreement by and between MECANIK A.S. and purchaser.
CENTURY ARMS is the certified service provider of MECANIK MO1 in the USA. Congratulations on purchasing your MECANIK MO1 Reflex sight. Your MECANIK optic is covered by our Limited Lifetime Warranty Policy. MECANIK will repair defects in material or workmanship associated with the optic without charge to the original purchaser for as long as you own the optic. (This agreement is not transferable and only applies to the original retail purchaser upon presentation of proof of purchase.) This Limited Lifetime Warranty only applies to the metal product housing, and does not apply to the optic and/or illumination system(s). The optic glass and illumination system (electronics and LED) are covered by a 3 year limited warranty. In the event that a warranty-covered defect is found, we will repair or replace the product with a MECANIK product of equal or greater value. MECANIK reserves the right to substitute the product for similar items if the model returned is unavailable.
THIS IS A REPAIR OR REPLACE WARRANTY, YOUR SOLE REMEDY FOR A DEFECT IN
MATERIALS OR WORKMANSHIP OF A MECANIK OPTIC IS THE REPAIR OF PARTS OR
REPLACEMENT OF THE OPTIC
Please visit www.mecanik.com and complete the
Product Registration Form within 30 days of purchase to register your MECANIK
optic. Proof of purchase, including a receipt or invoice, must be provided
with your registration and with any warranty claim. To make a repair claim,
visit www.mecanik.com and complete the information
for instructions on how to return your optic. Do not return your MECANIK Optic
for service without prior authorization.
LIMITATIONS OF WARRANTY
This warranty does not cover loss, theft, deliberate damage, accidental
damage, corrosion, neglect, abuse or unreasonable use, misuse, defects or
damage resulting from alterations or modifications to the optic, disassembly
beyond the instructions located in the product’s manual (where applicable),
normal or ordinary wear and tear, criminal misuse, negligence, use under the
influence of drugs or alcohol, or cosmetic damage that does not hinder the
performance of the optic. This warranty is void if the product has been
misused, modified, neglected, or disassembled prior to its return. The
included batteries are not covered under the Limited Lifetime Warranty.
- If a proof of original purchase receipt is not provided,
- MECANIK MO1 used for range rentals or other similar programs are not eligible,
- If interfaces other than Official Canik Accessory program are used,
- If the zeroing and assembly instructions in the manual are not followed,
- If a tool other than the one provided by MECANIK is used for assembly purposes and damage is caused consequently, 10. If damage occurs in the lens caused by cleaning with something other than the provided cleaning cloth,
- If improper, recharged or corroded batteries have been used in the optic.
To the full extent permissible by applicable law, any importer, distributor or
retailer, and their employees, agents, distributors and partners do not make,
and are not entitled or authorized to make, any warranty of any kind, express
or implied, with respect to the Mecanik MO1 optic,
INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. The only limited warranty provided is from MECANIK,
pursuant to the terms and limitations stated herein. Nothing contained herein
shall be interpreted as an implied or express warranty on behalf of MECANIK
beyond the terms above.
LIMITATION OF LIABILITY
TO THE FULLEST EXTENT ALLOWABLE BY LAW, MECANIK A.S. DISCLAIMS ALL IMPLIED
WARRANTIES AND MAKES NO OTHER EXPRESS WARRANTIES. MECANIK SHALL NOT BE LIABLE
FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE
PERFORMANCE AND USE OF THE PRODUCTS, EVEN IF MECANIK HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. Please note: MECANIK reserves the right to make
substitutions on warranty coverage for any reason, including but not limited
to available items. If Mecanik A.S. determines that the optic is not
repairable, we will replace the optic with an item of similar features and
product class at MECANIK’s sole determination and at no replacement cost to
you.
WARRANTY SERVICE PROCEDURE
Please visit www.mecanik.com and complete the
Product Registration Form within 30 days of purchase to register your MECANIK
optic. Proof of purchase, including a receipt or invoice, must be provided
with your registration and with any warranty claim. To make a repair claim,
visit www.mecanik.com and complete the information
for instructions on how to return your optic. Do not return your MECANIK Optic
for service without prior authorization. An Authorized Representative can
determine if factory service is required and how to proceed.
AUTHORIZED WARRANTY REPAIR FACILITY
If your MECANIK optic must be returned to the authorized warranty repair
facility at Century Arms, you will be responsible to pay the freight charges
to Century Arms. Before any item is returned to Century Arms, you must get a
Return Authorization (RA) number from us.
MECANIK optics returned to Century Arms without a Return Authorization Number (RAN) may be denied warranty service. When the MECANIK optic is received by Century Arms it will be inspected to determine if it is a proper claim for warranty repair. MECANIK will pay the freight charges to return the repaired item to the owner.