Simply nuc NUC12ZRN Zircon Intel N95 Mini PC User Manual

Table of Contents

Simply-nuc-NUC12ZRN-Zircon-Intel-N95-Mini-PC-product-
image

Specifications :

Connecting the Device:
Plug in the DC-in 12V Jack to power the device.
Connect your monitor or TV to the device using the HDMI 2.0 ports.
For network connectivity, use the 2.5Gb LAN port.
Peripheral Connections:
Connect external storage devices or peripherals to the USB ports (Type-C and Type-A).
Use the 3.5mm Stereo/MIC Port for audio input/output.
Powering On/Off:
Press the Power Button to turn the device on or off. The LED indicator will show the power status.
FCC Compliance:
To comply with FCC guidelines, maintain a minimum 20cm distance between the device and your body. Use only the supplied antenna for operation.

FAQ:

Q: What should I do if the device causes interference?
A: Ensure that there is no obstruction between the device and the antenna. Reposition the device if interference persists.
Q: Can I use any power plug with the device?
A: It is recommended to use the regional power plug included with the device for safe and optimal performance.

$Simply-nuc-NUC12ZRN-Zircon-Intel-N95-Mini-PC-fig- $2$$

$Simply-nuc-NUC12ZRN-Zircon-Intel-N95-Mini-PC-fig- $3$$

$Simply-nuc-NUC12ZRN-Zircon-Intel-N95-Mini-PC-fig- $4$$

$Simply-nuc-NUC12ZRN-Zircon-Intel-N95-Mini-PC-fig- $5$$

$Simply-nuc-NUC12ZRN-Zircon-Intel-N95-Mini-PC-fig- $6$$

$Simply-nuc-NUC12ZRN-Zircon-Intel-N95-Mini-PC-fig- $7$$

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.