TRAXXAS TRX1041 TQi Radio System Installation Guide

TRAXXAS TRX1041 TQi Radio System

Product Information

The product is a transmitter with multi-function knobs that allow users to adjust various settings related to steering, throttle, braking, and servo direction. It features LED indicators for easy navigation and adjustment.

Specifications

• Steering Sensitivity (Expo)
• Throttle Sensitivity (Expo)
• Steering Dual Rate (%)
• Braking Percentage (%)
• Throttle Trim

Menu Tree Formulas

To select functions and make adjustments to the TQi transmitter without referencing the menu tree, turn your transmitter on, find the function in the left column you wish to adjust, and simply follow the corresponding steps. Always turn your transmitter on first.

Set Multi-Function Knob Functions

• STEERING SENSITIVITY (Expo)
• THROTTLE SENSITIVITY (Expo)
• STEERING DUAL RATE (%)
• BRAKING PERCENTAGE (%)
• THROTTLE TRIM

Product Usage Instructions

Setting Steering Sensitivity (Expo)

1. Turn on the transmitter.
2. Locate the Multi-Function knob for steering sensitivity (Expo).
3. Adjust the Multi-Function knob until the desired sensitivity is achieved.

Setting Throttle Sensitivity (Expo)

1. Turn on the transmitter.
2. Locate the Multi-Function knob for throttle sensitivity (Expo).
3. Adjust the Multi-Function knob until the desired sensitivity is achieved.

Setting Steering Dual Rate (%)

1. Turn on the transmitter.
2. Locate the Multi-Function knob for steering dual rate (%).
3. Adjust the Multi-Function knob until the desired dual rate is achieved.

Setting Braking Percentage (%)

1. Turn on the transmitter.
2. Locate the Multi-Function knob for braking percentage (%).
3. Adjust the Multi-Function knob until the desired braking percentage is achieved.

Setting Throttle Trim

1. Turn on the transmitter.
2. Locate the Multi-Function knob for throttle trim.
3. Adjust the Multi-Function knob until the desired throttle trim is achieved.

Disabling (Locking) the Multi-Function Knob

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button to confirm, indicated by the green LED blinking.
3. The Multi-Function knob is now disabled (locked).

Reversing the Direction of Steering Servo

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button to reverse the direction of the steering servo, indicated by the green LED blinking.
3. Release the MENU button to return to driving mode.

Setting the Sub-Trim of Steering Servo

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button.
3. Use the Multi-Function knob to set the sub-trim of the steering servo.
4. Press the SET button to confirm, indicated by the green LED blinking.
5. Release the MENU button to return to driving mode.

Setting the End Points of Steering Servo

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button twice.
3. Turn the steering wheel to the desired maximum left and right travel.
4. Press the SET button to confirm, indicated by the green LED blinking.
5. Release the MENU button to return to driving mode.

Resetting the End Points of Steering Servo to Defaults

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button three times.
3. Press the SET button to reset the end points of the steering servo to defaults, indicated by the green LED blinking.
4. Release the MENU button to return to driving mode.

Reversing the Direction of Throttle Servo

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button four times.
3. Press the SET button to reverse the direction of the throttle servo, indicated by the green LED blinking.
4. Release the MENU button to return to driving mode.

Setting the Sub-Trim of Throttle Servo

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button five times.
3. Use the Multi-Function knob to set the sub-trim of the throttle servo.
4. Press the SET button to confirm, indicated by the green LED blinking.
5. Release the MENU button to return to driving mode.

Setting the End Points of Throttle Servo

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button six times.
3. Turn the throttle to the desired maximum forward and reverse travel.
4. Press the SET button to confirm, indicated by the green LED blinking.
5. Release the MENU button to return to driving mode.

Resetting the End Points of Throttle Servo to Defaults

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button seven times.
3. Press the SET button to reset the end points of the throttle servo to defaults, indicated by the green LED blinking.
4. Release the MENU button to return to driving mode.

Reversing the Direction of Shift Servo

1. Press and hold the MENU button until the green LED blinks.
2. Press the SET button eight times.
3. Press the SET button to reverse the direction of the shift servo, indicated by the green LED blinking.
4. Release the MENU button to return to driving mode.

Pressing and Holding MENU Button

1. Press and hold the MENU button until the green LED blinks (x8).
2. Press the SET button to confirm, indicated by the green LED blinking (x8).
3. Release the MENU button to return to driving mode.

Pressing SET Button

1. Press the SET button until the red LED blinks (x2).
2. Press the SET button to confirm, indicated by the red LED blinking (x2).
3. Release the MENU button to return to driving mode.

Pressing MENU Button

1. Press the MENU button until the green LED blinks (x2).
2. Press the MENU button twice until the red LED blinks (x3).
3. Press the MENU button three times until the red LED blinks (x4).
4. Release the MENU button to return to driving mode.

Using Menu Tree Formulas

To select functions and make adjustments without referencing the menu tree:

1. Turn on the transmitter.
2. Find the function in the left column you wish to adjust.
3. Follow the corresponding steps mentioned in the user manual.

Lock and Unlock Multi-Function Knob
Instructions for locking the knob to prevent unwanted adjustments and unlocking it for further use.

LED Blink Codes

Detailed steps involving pressing and holding the MENU button and pressing the SET button, with the corresponding number of green or red LED blinks to adjust each setting.

Contact Information

For warranty service or additional support, contact Traxxas:

• Phone: +1-972-549-3000
• Email: support@Traxxas.com
• Address: Traxxas, 6250 Traxxas Way, McKinney, TX 75070
• Website: Traxxas

Warranty and Precautions

Traxxas offers a warranty for electronic components, with limitations outlined. Important safety measures related to the radio system are also provided, including antenna management and handling precautions.

Starting Up
Instructions for installing batteries, setting up the transmitter, and activating the model. Additional information on initial configurations, including the Traxxas Link module and application, is provided.

Advanced Tuning Guide
Detailed explanations of advanced settings available through the Traxxas TQi Radio System and Traxxas Link application, such as exponential sensitivity adjustments for steering and throttle, advanced endpoint and sub-trim settings, and model memory features.

Frequently Asked Questions (FAQ)

Where can I register my Traxxas product?
Register your product at Traxxas Product Registration.

Where can I find more information about Traxxas Stability Management (TSM)?
For detailed information, visit Traxxas TSM.

How do I disable (lock) the Multi-Function knob?

To disable the Multi-Function knob, press and hold the MENU button until the green LED blinks. Press the SET button to confirm, indicated by the green LED blinking.

How do I reverse the direction of the steering servo?

To reverse the direction of the steering servo, press and hold the MENU button until the green LED blinks. Press the SET button to reverse the direction, indicated by the green LED blinking.

How do I set the sub-trim of the steering servo?

To set the sub-trim of the steering servo, press and hold the MENU button until the green LED blinks. Press the SET button, use the Multi-Function knob to adjust the sub-trim, and press the SET button to confirm.

How do I reset the end points of the steering servo to defaults?

To reset the end points of the steering servo to defaults, press and hold the MENU button until the green LED blinks. Press the SET button twice, turn the steering wheel to the desired maximum left and right travel, and press the SET button to confirm.

How do I reverse the direction of the throttle servo?

To reverse the direction of the throttle servo, press and hold the MENU button until the green LED blinks. Press the SET button four times, and press the SET button to reverse the direction, indicated by the green LED blinking.

How do I reverse the direction of a servo?

Follow the LED blink codes in the Menu Tree to reverse servo direction.

What should I do if the END POINTS need to be changed?

Use the SET button and repeat the steps as indicated in the Menu Tree.

How do I lock the Multi-Function Knob?

Press and hold the MENU button until the green LED blinks the specified number of times, then press the SET button.

References

• RC Cars | RC Trucks | Traxxas
• Register Your Traxxas Product | Traxxas
• Receiver, micro, TQi 2.4GHz with telemetry & TSM® (5-channel) | Traxxas

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>