Hvacquick MCB Series Built To Order Duct Transition Instruction Manual
- June 15, 2024
- Hvacquick
Table of Contents
MCB Series
Built-To-Order Duct Transition
Assembly Instructions
MCB Series Built To Order Duct Transition
Thank you for purchasing a Built-To-Order Transition from
HVACquick.com
Before Installing this equipment, please take a moment to inspect for damage
it may have sustained during shipping.
DO NOT INSTALL DAMAGED EQUIPMENT.
If you suspect damage, contact us by phone at:
888-855-7229 or email at
team@hvacquick.com
To minimize volume in shipping, our built-to-order transitions ship partially assembled. Included with this regular transition are:
- the Duct Adapter with sheet metal screws (HW-905) to mount it
- If you purchased the optional mounting brackets, 4 mounting brackets with sheet metal screws (HW-905) to mount them
Installing the Duct Adapter:
Slide the duct adapter from within the box upward through the top plate.
Secure it using the provided HW-905 sheet metal screws. (up to 12 screws
depending on size purchased)
If you purchased the optional mounting brackets:
Mount the four brackets, as shown below, using the 12x HW-905 sheet metal
screws
Please NOTE: the brackets can be mounted in multiple positions and upside
down (not shown).
You are now ready to install the transistion:
The basic transition can be mounted by screwing mounting screws (not included)
through the side wall holes.
The transition with brackets can be mounted in multiple ways by screwing
mounting screws (not included) through the bracket holes (see picture).
Install this equipment in compliance with all local codes and
standards.
© AirScape MCB- Series I – SP, July 2023,
All Rights Reserved.
References
- HVACQuick - residential
- HVACQuick - residential
- HVACQuick - HVACQuick Custom Square to Round Duct Transitions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>