Sdion HC-WC01 Car Phone Holder Mount User Manual
- June 15, 2024
- Sdion
Table of Contents
Sdion HC-WC01 Car Phone Holder Mount
Features
- Bottom Clip
- Left & Right Control Button
- Operation Sensor
- Left & Right Arm
- Central Charging Sensor
- Ball-head knob
- Extendable Rod
- Extended knob
- Suction Rotary
- Folding Rod
- Folding Lever Knob
- Suction Cup
- Cable
- Air-vent Hook
- Hook Knob
Installation
Suction cup
- Place the ring nut around the rod
- Insert the ball head into the base insertion
- Tighten the nut clockwise to secure stability
- Suction cup installation precautions
Installation-Air Vent Hook
- Installation – Air Vent Hook
- Insert ball head into the base insertion
- Tighten the knob to hold both parts
- Turn the knob counterclockwise to extend the hook
- Tighten the knob to hold both parts
- Turn the knob clockwise, tighten the hook to lock the grille, and fix the holder
Instructions
STEP 1: iPhone12 Pro Max/iPhone 13 Pro Max/iPhone 14 Pro Max iPhone 15 Pro Max/Mate40/Mate 40 Pro/Mate 50/Mate 50 Pro Mate 60/Mate 60 Pro/Galaxy S20+/Galaxy $21 +/Galaxy S22+ Galaxy 523+…
STEP 2: Galaxy $20…
STEP 3: iPhone12/ iPhone12 Pro/iPhone 13/iPhone 13 Pro/iPhone 11 iPhone 14 Pro/iPhone 15/iPhone 15 Pro/Galaxy 522/Galaxy S23…
Note: mobile phone control scale is only the approximate position. different heights adjust: 1-3mm space iPhone 12mini / iPhone 13min and other small size mobile phones. the bottom clip does not need adjustment.
Adjust bottom clip to achieve the best wireless charging position
You can control the opening and closing of the clamping arms by pressing the left or right buttons
Without electricity
- A. You can press the left or right buttons to tighten the mobile phone
- B. When the mobile phone is placed on the holder, it triggers the sensor area to automatically clamp mobile phone
When connecting to the cable, automatic closure mode activates through the coil induction.
Product Parameters
- Model No: HC-WC01
- INPUT:DC 5V/2A 9V/2A
- OUTPUT: 15W(MAX)
Mobile Phone Power Compatibility Meter
15W
LG V50/V40/V30+/V30/V40 ThinQ/G8s/G8 ThinQ/G7 ThinQ/G7
10W
Galaxy S23/S22/S21/S20/S10/S9/S9+/S8/S8+/S7 edge/S6 edge
Note 20/Note 10/Note 10+ /9/8/7/5,etc7.5W iPhone 15/14/13/12/11 Series/iPhone
Xs(Max)/X/XR/iPhone 8/8 Plus
5W
Qi-Compatible Phones
Wireless Charging LED Status
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.