FIT 500092 Display Compact Remote Basic Eshift Pinion Instruction Manual

FIT 500092 Display Compact Remote Basic Eshift Pinion

Product Information

Specifications

• Manufacturer: Biketec GmbH
• Model: FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION
• Product Codes: 500085 | 500092 | 501262 | 500429

About These Operating Instructions

In this section, you will find information about the manufacturer, language, declaration of conformity, and warnings related to these operating instructions.

Safety Instructions

This section provides general safety information and instructions related to the operating element and display of the product.

Product and Technical Specifications

FIT DISPLAY COMPACT

The FIT Display Compact is a networked, customised, and intelligent display for electric bikes.

Display and Settings

The FIT Display Compact features a clear and easy-to-read display that provides information about various parameters, such as speed, distance, battery level, and assistance mode. It also allows you to adjust settings and customize the display according to your preferences.

Operating Element

FIT REMOTE BASIC

The FIT Remote Basic is an operating element that allows you to control various functions of your electric bike, including power assistance levels and lights.

FIT REMOTE ESHIFT

The FIT Remote ESHIFT is an advanced operating element specifically designed for electric bikes with Pinion TE1 E-Trigger systems. It allows you to change gears seamlessly and efficiently.

PINION TE1 E-TRIGGER

The Pinion TE1 E-Trigger is a high-quality electronic shifting system designed for electric bikes. It provides smooth and precise gear shifting for an enhanced riding experience.

Proper Use

It is important to use the FIT Display Compact and FIT Remote Basic / ESHIFT PINION according to the manufacturer’s instructions and guidelines. Improper use may result in damage to the product or injury to the user.

Technical Data

Here are the technical specifications for the FIT Display Compact, FIT Remote Basic, and FIT Remote ESHIFT:

• FIT Display Compact: [Technical data]
• FIT Remote Basic: [Technical data]
• FIT Remote ESHIFT: [Technical data]

Transportation and Storage

Transportation

When transporting your electric bike, ensure that it is securely fastened and protected from any potential damage. Follow the recommended guidelines for transporting e-bikes.

Storage

During storage, it is important to keep your electric bike in a dry and secure location. Protect it from extreme temperatures and avoid placing heavy objects on top of it.

Break-in Operation

A break-in operation is recommended for new electric bikes to ensure optimal performance and longevity. Follow the instructions provided for carrying out a break-in operation.

Frequently Asked Questions

1. Can I use the FIT Display Compact with any electric bike?
2. What functions can I control with the FIT Remote Basic?
3. Is the FIT Remote ESHIFT compatible with all Pinion TE1 E-Trigger systems?
4. How should I transport my e-bike to prevent damage?
5. What is the recommended storage condition for my electric bike?
6. Do I need to perform a break-in operation for my new electric bike?

INSTRUCTION MANUAL
FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION
500085 | 500092 | 501262 | 500429

NETWORKED CUSTOMISED INTELLIGENT

Biketec GmbH Luzernstrasse 84 CH-4950 Huttwil T +41 62 959 53 00
info@biketec.ch fit-ebike.com

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

3

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

1 PREFACE
Dear FIT customer,
The FIT system offers many useful functions and options and we are pleased that you have decided to choose our system.
Please read through the operating instructions carefully to ensure you use the system safely and get off to a quick start.
We hope you enjoy discovering the FIT’s functions and have a fun ride every time you use it.
Thank you for placing your trust in FIT.
Your FIT Team

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

4

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

ABOUT THESE OPERATING INSTRUCTIONS

2.1 MANUFACTURER
Biketec GmbH Luzernstrasse 84 CH-4950 Huttwil fit-ebike.com/en

2.2 LANGUAGE
The original operating instructions are written in German. A translation is invalid without the original operating instructions.

2.3 DECLARATION OF CONFORMITY
Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives. The complete EU Declaration of Conformity is available online at: fit-ebike.com/en- en/service/declaration/

2.4 ON INFORMATION
Different markings are used in the operating instructions to make them easier to read.

2.5 WARNINGS IN THESE OPERATING INSTRUCTIONS
Warnings indicate hazardous situations and actions. You will find the following warnings in the operating instructions:

Exclamat

DANGER May lead to serious or even fatal injuries if ignored. Medium-risk hazard.

Exclamat

CAUTION May lead to minor or moderate injuries if ignored. Low-risk hazard.

INFO-CIR NOTICE May lead to material damage if ignored.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

5

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

SAFETY INSTRUCTIONS

3.1 GENERAL INFORMATION
Please read all safety instructions carefully. Failure to comply with the warnings or take residual risks into account may result in electric shock, fire and / or serious injury.
Keep the operating instructions in a safe place and have them readily available to consult. Pass these instructions on if you provide your e-bike for someone else’s use.
The generic names used in these operating instructions, such as motor, battery and operating element, all refer to original FIT e-bike components.
3.2 OPERATING ELEMENT AND DISPLAY
Do not let the messages on the display screen distract you. If you do not focus solely on traffic on the road, you risk being involved in an accident.
Do not open up the operating element or the display. They both can be permanently damaged if they are opened and the warranty will become void.
Do not use the display as a handle. If you use the display to lift your e-bike, you can damage the display irreparably.
Do not place the e-bike upside down on its handlebars and saddle if the display or its mount project above the handlebars. The display or the mount can become irreparably damaged. Also remove the display before placing the e-bike on a work stand to ensure that the display does not fall off or get damaged.
Caution! If you use the operating element with Bluetooth, it may cause interference with other devices and equipment, aircraft, and medical devices, such as pacemakers and hearing aids. Likewise, it cannot be completely ruled out that you will cause harm to people and animals in the immediate vicinity. Avoid operating close to your body for extended periods of time. You must observe local restrictions on using Bluetooth when in aircraft or hospitals, for example, or in close proximity to medical devices, filling stations, chemical plants, blasting zones and areas at risk of explosion.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

6

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

PRODUCT AND TECHNICAL SPECIFICATIONS

4.1 FIT DISPLAY COMPACT
The FIT Display Compact combines the same functions in a compact 2″ display as in its larger counterpart, offering optimum visibility in a small design.

4.1.1 DISPLAY AND SETTINGS
The following display elements remain the same on all screens and show the key settings and information about the vehicle and the current trip.
1. Clock 2. Notice / danger alert messages 3. Battery charge level 4. Current level of assistance 5. eShift gear indicator 6. Light (main beam / dimmed headlight / off)

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

7

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

4.2 OPERATING ELEMENT
4.2.1 FIT REMOTE BASIC
The ergonomic operating element FIT Remote Basic allows you to control the FIT Display easily and safely, even while riding. The button backlit by LEDs and the vibration feedback ensure optimum usability, even in the dark or while wearing gloves.

Operating element

Description On / off button Rocker switch (right, left and press)
Plus / minus button Pushing aid / boost button Light button

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

8

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

4.2.2 FIT REMOTE ESHIFT
The ergonomic FIT Remote eShift control unit allows the FIT display to be controlled easily and safely, even while riding. The LED-backlit buttons and vibration feedback guarantee ease of operation even when wearing gloves or in the dark.

Control unit

Description On / off button
Rocker switch (right, left and press)

Plus / minus button Pushing aid / boost button Light button

Gear shift up / down button

Automatic gear shift button (available soon.)

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

9

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

4.2.3 PINION TE1 E-TRIGGER
The compact Pinion TE1 e-trigger gear lever has been specially developed for shifting with Pinion Smart.Shift shift technology. The goal was to provide clear haptic feedback. With a defined lever path and sophisticated micro button tuning, you can precisely initiate each shifting process. Maintenance- free and waterproof as defined by IP66, the TE1 is the optimal control in every situation.

1. Rear gear lever 2. Front gear lever 3. Blind screw 4. Matchmaker clamp with screw 5. Plug

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

10

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

4.3 PROPER USE
The operating element and the display are designed to control a FIT e-bike system and display trip data.
4.4 IMPROPER USE
Improper use refers to use which is not described under proper use or goes beyond proper use.
4.5 TECHNICAL DATA
4.5.1 FIT DISPLAY COMPACT

Display

Product code

Operating temperature °C

Storage temperature °C

Protection class

Weight about

kg

FIT Display Compact
500085 -5 to +40 -10 to +50 IPX7 0.1

4.5.2 FIT REMOTE BASIC

Operating element Product code

Operating temperature °C

Storage temperature °C

Protection class

Weight about

kg

FIT Remote Basic
500092 (without spacer) 501262 (with spacer) -10 to +40 -20 to +50 IPX7 0.05

4.5.3 FIT REMOTE ESHIFT

Operating element

Product code

Operating temperature °C

Storage ttemperature °C

Protection class

Weight about

kg

FIT Remote eShift
500429 -10 to +40 -20 to +50 IPX7 0,06

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

11

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

TRANSPORTATION AND STORAGE

5.1 TRANSPORTATION

Exclamat

CAUTION Remove battery before transportation. There is a risk of injury if the drive system is switched on unintentionally.

5.1.1 TRANSPORTING E-BIKES Protect the electrical components and connections on the e-bike from the elements with suitable protective covers.

5.2 STORAGE

Exclamat

CAUTION Store e-bike, display, battery and charger in a clean, dry place where they are protected from sunlight. Do not store outdoors to ensure a long service life. The optimum storage temperature for your e-bike is between 10 °C and 20 °C. Temperatures under -10 °C or over +40 °C must generally be avoided. Store e-bike, display, battery and charger separately.

5.3 BREAK IN OPERATION
If you remove the e-bike from service for longer than four weeks, you need to prepare it for a break in operation.

5.3.1 CARRYING OUT A BREAK IN OPERATION
Store the e-bike, battery and charger in a dry, clean environment. We recommend storing them in uninhabited rooms with smoke alarms. Dry locations with an ambient temperature between 10 and 20 °C are ideal.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

12

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

FITTING

6.1 FITTING THE FIT DISPLAY COMPACT
As the mount docks available to hold the display are identical, the FIT Universal Mount is used as an example to show how the display is fitted into place. The display is fitted in the same way on the FIT Display Center Mount.

FIT Display Universal Mount

FIT Display Center Mount

Inserting FIT Display Compact

1. Place the lower section of the display into the mount. 2. Gently press the display downwards until you feel it latch into place. 3. Optional: Secure display with anti-theft securing screw.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

13

INSTRUCTION MANUAL Removing FIT Display Compact

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

1. Remove the anti-theft securing screw if you have one fitted. 2. Press the unlocking mechanism. 3. Remove display, pulling it upwards.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

14

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

OPERATION

7.1 INITIAL OPERATION
7.1.1 ELECTRIC DRIVE SYSTEM
SWITCHING ON THE ELECTRIC DRIVE SYSTEM The system can only be switched on if a sufficiently charged battery and the display are inserted. Press the on-off button for at least one second to switch on the system. The «Drive» menu is shown on the display screen.

SWITCHING OFF THE ELECTRIC DRIVE SYSTEM The drive system switches off automatically to save energy if no rider activity is detected for a longer period of time. (The rider can adjust the time interval until switch-off in the settings menu -> MyBike -> Auto Power Off.) The display is operated using the rocker switch on the operating element so that your hands can remain on the handlebars while you are riding. Press the on-off button for at least a second to switch off the electric system by hand.

OPERATION You can use the rocker switch to access the different main screens (right / left) and their respective subscreens (press). The settings menu can only be accessed when the e-bike is stationary. You can use the plus / minus button to select the level of assistance. You can use plus / minus to scroll up and down a list you have accessed, such as the Settings menu. If the light button and the rocker switch (press) have a new function (OK, Back), this is shown on the display.
7.1.2 PAIRING / COUPLING THE FIT KEY CARD WITH THE FIT E-BIKE CONTROL APP
The FIT Key Card is your ticket to the digital FIT world for every e-bike with FIT 2.0 integration. The individual ID is based on the SmartX technology from ABUS and ensures a secure connection to the e-bike with a unique key.

INFO-CIR

NOTICE Keep the card in a safe place as it serves as the e-bike’s ID. Can be reordered subject to payment in the e-shop if lost.

Select the menu E-bikes in the navigation bar Press the + icon to add your e-bike in the FIT E-Bike Control app

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

15

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Follow the instructions in the FIT E-Bike Control app

7.1.3 ASSISTANCE MODES

You can set the assistance levels using the + and ­ buttons on the control unit.

Symbol

Description

Maximum motor assistance for active riding up to high pedaling frequencies.

Motor assistance is perfect for E-MTB trails or very agile e-bikes.

Motor assistance for energy-saving cross-country trips or moderate off-road terrain.

Minimal motor assistance with optimum efficiency for maximum range.
No motor assistance. The e-bike rides like a normal bicycle. All on-board computer functions are available.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

16

INSTRUCTION MANUAL 7.1.4 PUSHING AID Assistance mode icon:

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

The pushing aid makes it easier to push the e-bike. The e-bike can be moved out of underground parking or along steep paths comfortably by activating the pushing aid. Briefly press the pushing aid / boost button to activate pushing aid mode. Press again to start the pushing aid. If you release the pushing aid / boost button for more than five seconds, you will leave pushing aid mode. Pushing aid speed can be adjusted via the settings menu. While using the pushing aid, the pushing aid speed can be temporarily reduced / increased via the buttons on the TE1 trigger.

Exclamat

CAUTION When using the pushing aid, the wheels must be in contact with the ground, otherwise there is a risk of injury.

7.1.5 BOOST FUNCTION Assistance mode icon:

The Boost function can be used to briefly increase motor support to FLY level regardless of the selected assistance level (ECO, FLOW, FLEX). This function can be activated at speeds of 7 km/h and over and if at least one quarter pedal revolution has been detected. The Boost function cannot be used if the pushing aid mode is active.
Press the Pushing aid / Boost button to activate the Boost function. The Boost function is activated as long as the button is held down.
7.2 LIGHTING
You can use the light button to switch between the following lighting modes (availability depends on the model):

Symbol

Description

Dimmed headlight

Main beam

Light off

Different lighting systems are fitted depending on the bike type and field of use. If the system features a daytime running light function, the bike switches between the dimmed and daytime running lights automatically. The dimmed headlight is permanently activated on S pedelecs because of EU directives. Pressing the light button will activate or deactivate the main beam as well.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

17

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

7.3 ESHIFT
You can select the gear shift manually with the up / down button.

Symbol

Description

Current selected speed

Gear recommendation ­ change up a gear
Gear recommendation ­ change down a gear

7.4 WARNING / ERROR SYMBOLS

Symbol

Meaning Ice hazard (temperature 4 °C)
Maintenance request
Motor overheat Battery protection mode (battery level and / or temperature too low) Low tire pressure
Info
Warning
Error / Critical error

Action / Limitation
Drive carefully.
Your e-bike should be taken to the FIT specialist dealer for maintenance as soon as possible.
Reduced ride assistance performance. (This is not an error, but is meant to protect the motor.)
Reduced ride assistance performance. (This is not an error, but is meant to protect the battery.)
Check and adjust the tire pressure if necessary. (This function is only available with optional tire pressure sensors.)
Motor assistance available The message can be acknowledged by pressing the rocker switch. (For more information, see section 9.3.1) Motor assistance available The message can be acknowledged by pressing the rocker switch. (For more information, see section 9.3.1) No motor assistance Motor assistance is only available once the error has been rectified and the system has been restarted (only in the case of a critical error). (For more information, see section 9.3.1)

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

18

INSTRUCTION MANUAL
7.5 MAIN / SUB-SCREENS
MAIN DRIVE SCREEN

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

1. Current speed 2. The hatched part indicates that the battery is in Long Life mode. If Long Life mode is
deactivated, the hatching disappears. (For more information, see section 7.6) 3. Current motor assistance 4. Range (in current assistance setting / level of assistance)

DRIVE SUB-SCREEN
1. Battery charge level (if there is more than one battery, they are all displayed and are numbered consecutively)
2. Odometer (total number of kilometers that the e-bike has covered. This value cannot be reset)
3. Linked devices (heart rate sensor, smartphone, including smartphone battery charge level)
DRIVE SUB-SCREEN 2 (only available with installed FIT tire pressure sensors)

1. Current rear tire pressure 2. Current front tire pressure

TRIP MAIN SCREEN
1. Distance ridden during the current trip 2. Duration of the current trip

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

19

INSTRUCTION MANUAL TRIP SUB-SCREEN

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

1. Difference in altitude ridden during the current trip 2. Average battery consumption during the current trip

TRIP SUB-SCREEN 2
1. Maximum speed for the current trip 2. Average speed of the current trip

FITNESS MAIN SCREEN
1. Current pulse (only displayed if a heart rate sensor is connected. This option depends on the model. The system only supports heart rate bracelets featuring Bluetooth 4 and higher or Bluetooth Low Energy.)
2. Current pedal speed
FITNESS SUB-SCREEN
1. The rider’s current pedalling power 2. Calorie consumption during the current trip

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

20

INSTRUCTION MANUAL AREA MAIN SCREEN

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

1. Current altitude (measured based on the air pressure) 2. Current ascent or descent as a percentage

AREA SUB-SCREEN 1. Current temperature

AREA SUB-DISPLAY The weather forecast is only available in conjunction with the FIT E-Bike Control app. To use the FIT E-Bike Control app, the smartphone must be connected to the e-bike using the FIT Key Card (see Section 7.1.2).
1. Weather forecast in three hours 2. Weather forecast in two hours 3. Weather forecast in one hour

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

21

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

7.5.1 NAVIGATION
Navigation is only available in conjunction with the FIT E-Bike Control app. To use the FIT E-Bike Control app, the smartphone must be connected to the e-bike using the FIT Key Card (see section 7.1.2).

There are two types of navigation available: MAP: Direct destination entry and navigation in the FIT E-Bike Control app. ACTIVITIES: Tour records and planned tours of the connected komoot account can be displayed here. Navigation is available on all routes under Planned Tours.

INFO-CIR

NOTICE To use the navigation function, you must observe the following points:
The e-bike must be switched on and connected to the smartphone. To ensure the connection (Bluetooth) between the e-bike and the FIT E-Bike Control app, the smartphone and e-bike must be no more than five meters apart. The e-bike must be linked to the FIT E-Bike Control app (see section 7.1.2).

Navigate to: Enter the desired navigation destination.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

22

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

After entering the start and end point, information about the selected route is displayed:
1. Distance to the target. 2. The red battery symbol indicates that the current charging status is not sufficient
to reach the destination in any assistance level. 3. Current range in the various assistance levels (the black bar shows the assistance
level currently selected on the e-bike).
Navigation can be started with START.

In the ACTIVITIES menu, you can choose between recorded and planned tours from the linked komoot account. The last route is also available as a speed dial.

INFO-CIR

NOTICE After linking your komoot account for the first time, it will take a while for all planned tours to be synchronized.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

23

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

The PLANNED TOURS menu displays the planned tours of the linked komoot account with information on duration, route length, highest and lowest points. Here you can select a tour for navigation.

After selecting a tour, the details of the tour are displayed again in detail. Navigation can be started using START TOUR.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

24

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

NAVI MAIN DISPLAY If navigation on the smartphone has not been started, the following message appears.

If navigation has been started on the smartphone, the following display appears.
1. The distance to the next navigation point 2. Road ahead 3. Navigation direction at next navigation point
From 100m before a navigation point, the distance is also indicated by a bar.
1. The distance to the next navigation point
NAVI SUB-DISPLAY
1. Current remaining time to the navigation destination 2. The distance to the next navigation point 3. Navigation direction at next navigation point 4. Current remaining distance to the navigation destination

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

25

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

DISPLAY CALLS
The call display is only available in conjunction with the FIT E-Bike Control app. To use the FIT E-Bike Control app, the smartphone must be connected to the e-bike using the FIT Key Card (see section 7.1.2).

Exclamat

CAUTION Do not take calls while riding. When a call is displayed, first find a suitable place to stop before answering the call.

To enable the call to be displayed, the necessary authorizations must be granted to the FIT E-Bike Control app once on the smartphone. In the E-bike Settings menu, the call display must be activated in the Connectivity submenu.
The calls are only displayed. Calls cannot be accepted via FIT Remote.

INFO-CIR

NOTICE Android ­ Only phone calls are displayed. iOS ­ Displays phone calls and messenger calls.

1. Name of the caller (taken over by the connected smartphone). Only the most common special characters can be displayed. Unrepresentable characters and emoticons are replaced by a question mark (?) on the display.

1. Incoming call icon. If the call display is acknowledged by pressing the select rocker switch, the caller’s name disappears. The icon remains as long as the smartphone displays an incoming call.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

26

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

7.6 CHARGE INDICATOR

Menu ­ Charge The charge indicator appears as soon as the charger is connected to the e-bike. Use the plus / minus button to select the charging mode (NORM, FAST, STORE) and save it by pressing the rocker switch. The Long Life mode can be switched on or off with the light button.

Charging mode NORM (Normal) FAST (Fast) STORE (Storage)
Long Life

Description
Normal charging
Fast charging
Storage mode If the battery is not going to be used for an extended period of time, we recommend storage mode «Storage» and an optimum storage temperature between 5 and 15°C. In Storage mode, the battery is charged to about 60 % which allows the battery to bridge the time until it is reused as gently as possible.
Slightly less capacity is available if the battery is used in LONG LIFE mode. On the other hand, the battery retains its capacity for longer. The LONG LIFE mode is available for both normal and fast charging. In LONG LIFE mode, the battery is charged to about 80 %.

NORMAL CHARGING OF SINGLE BATTERY

1. Current charging mode 2. Long Life mode (grayed out = switched off) 3. Current battery charge level 4. Shows battery is currently being charged

NORMAL CHARGING OF MULTIPLE BATTERIES
1. Current charging mode 2. Long Life mode (grayed out = switched off) 3. Current charge level of the second battery 4. Current charge level of the first battery 5. Range Extenders are displayed with a plus sign 6. Charging status based on the total capacity of the batteries on the e-bike

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

27

INSTRUCTION MANUAL LONG LIFE MODE CHARGING

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

1. Current charging mode 2. Long Life mode (green background = switched on) 3. Current battery charge level 4. As the battery is not fully charged in Long Life mode, the rest is gray-hatched 5. Shows battery is currently being charged

CHARGING IN STORAGE MODE
1. Current charging mode 2. Long Life mode (grayed out = switched off) 3. Current battery charge level 4. As the battery is not fully charged in storage mode, the rest is gray-hatched 5. Shows battery is currently being charged

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

28

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

SETTINGS MENU

The settings menu is the last screen, which can be accessed by pressing the rocker switch to the right. It can only be accessed when the e-bike is stationary.

8.1 FIT DISPLAY COMPACT

1. Currently selected sub-menu 2. Scroll bar

1. Option disabled (left slide switch and grayed out) 2. Currently selected setting 3. Current sub-menu

1. Option enabled (slide switch on the right and black)

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

29

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

8.2 MENU STRUCTURE
1. Reset values
(a) Reset trip i. Reset manually ii. Reset automatically
(b) Factory settings
2. Basic settings
(a) Language (b) Date and time
i. Time ii. Time zone (only after activation by the specialist dealer. Coming soon.) iii. Automatic daylight saving time (only after activation by the specialist dealer. Coming soon.) iv. Set time automatically (only after activation by the specialist dealer. Coming soon.) v. Time format vi. Date (c) Units (metric / imperial)
3. Connectivity
(a) Connect pulse monitor (b) Disconnect pulse monitor (c) Call display
4. My Bike
(a) Altitude calibration (b) Automatic backlighting (c) Power off (d) Vibration feedback (e) Motor shutdown when braking (S-Pedelec only) (f) Disable menu display (remote display only) (g) Pushing aid speed
5. Gears (only available with eShift)
Setting options depend on the product
6. Charging
(a) Normal charging (b) Fast charging (c) LONG LIFE mode
7. Tire pressure (only available with tire pressure sensors)
(a) Pressure unit (b) Front (c) Rear
8. Messages
9. About

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

30

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

8.3 SETTING OPTIONS

Menu ­ Reset values The tour data and the system can be reset to the factory settings in this menu.

Reset trip Resets the trip data. You can choose between resetting manually (one-time) or resetting automatically according to the following criteria:

Selection
Off After rebooting After 4 hours of inactivity Once a day

Description Automatic reset disabled Reset automatically when the e-bike is switched off and on again Reset automatically when the e-bike is switched off for more than 4 hours The tour dates are reset once a day (at 0h00)

Factory settings Returns the system to its default state. All settings and saved values are deleted. The deletion cannot be undone.

Menu ­ Basic settings The basic display settings can be carried out in this menu.

Language Select the display language.

Date and time In the Date and time menu you can configure all the settings for the date and time.

Time You can set the current time in the time menu. The current digit can be changed by pressing the plus / minus button. Select the number to be changed with the selection rocker switch. Press the selection rocker switch to save the time and quit the time menu. Press “Cancel” to leave the menu without saving the changes.

Time zone (only after having been enabled by the specialist dealer. Coming soon.) Setting the current time zone.

Automatic daylight saving time (only after having been enabled by the specialist dealer. Coming soon.) If the Automatic daylight saving time setting is activated, the time is automatically changed between summer and winter time.
Set time automatically (only after having been enabled by the specialist dealer. Coming soon.) If Set time automatically is enabled, the time and date (UTC) are adopted from the connected mobile phone or installed FIT E-Bike Tracker. The time and date can no longer be set manually on the e-bike if the automatic time setting is enabled. The time zone, automatic daylight saving time and time format can still be set on the e-bike. This means that a different time zone can be displayed on the e-bike, regardless of the mobile phone setting.

Time format Toggle the time display between 12h and 24h.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

31

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Date You can set the current date in the date menu. The current digit can be changed by pressing the plus / minus button. Select the number to be changed with the selection rocker switch. Press the selection rocker switch to save the date and quit the menu. Press “Cancel” to leave the menu without saving the changes.

Units You can switch between the metric and imperial system in the units menu. The following units are replaced:

Measured value
Distance Speed Energy consumption Temperature Elevation

Metric
km km/h Wh/km °C m.a.s.l.

Imperial
mi mph Wh/mi °F FAMSL

Menu ­ Connectivity Information on the availability and use of add-on devices that can be connected can be found on the e-bike manufacturer’s website.

Menu ­ My Bike The user-related settings for the e-bike can be carried out in this menu.

Altitude calibration The altimeter is calibrated in the calibration menu. Important: The altitude measurement depends on the atmospheric pressure and can lead to deviations if this changes. We recommend that you carry out a calibration if the weather changes.

Auto. backlighting You can choose between the automatic adjustment of the display’s backlighting to the ambient light (ON) or a manual setting of the backlighting (OFF) between 10 and 100% in this menu. Pressing the selection rocker switch saves the selected backlight and exits the menu. Clicking Cancel exits the menu without saving any changes.

INFO-CIR

NOTICE If the display gets too hot, the backlighting is automatically reduced to 20 %. This is a precautionary measure to prevent temporary discoloration on the display. When the temperature has fallen back to normal, the brightness automatically switches back to the previously set value.

Power off The Power off menu can be used to set the time after which the system switches off automatically when not in use.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

32

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Vibration feedback The vibration can be set as feedback from the control unit in the vibration feedback menu. The following setting options are available:

Selection
Off On Only for messages

Description
No vibration feedback Every button press / active message generates vibration feedback Vibration feedback is only generated for messages

Motor cut-off during braking In the menu Motor cut-off during braking, you can choose whether or not motor assistance should switch off automatically during braking. This function is only available for S-Pedelecs.

Disable menu display In the Disable menu display menu, you can select whether, during the trip, the selection display appears while switching between the main displays or whether you want to switch directly between the main displays. This function is only available with the Remote display.

Pushing aid speed The speed of the pushing aid function can be set in the Pushing aid speed menu. While using the pushing aid, the pushing aid speed can be temporarily reduced / increased via the buttons on the TE1 trigger.

Menu ­ Charge The desired charging mode as well as the LONG LIFE mode for the battery can be set in the Charge menu.

Charging mode Normal Fast
Long Life

Description
Normal charging Fast charging If the battery is used in LONG LIFE mode, there is slightly less capacity available. On the other hand, the battery retains its capacity for longer. The LONG LIFE mode is available for both normal and fast charging.

Menu ­ Messages The list of current error messages can be viewed in the messages menu.
Menu ­ About The About menu shows the software version and settings of the individual system components. Motor shows, for example, the maximum torque and whether a motor upgrade has been activated.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

33

INSTRUCTION MANUAL
8.4 ESHIFT SETTINGS
8.4.1 PINION MGU / ESHIFT

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Gear assignment ­ Select the gear direction for the up- / down button on the FIT remote EShift or Pinion TE1 gear lever or similar. Smart.Shift ­ Your MGU has Pinion Smart.Shift technology. This shifts the internal gearbox electrically in fractions of a second. Here you can choose between different shift settings. Calibration ­ Calibration of the gears (to be performed after a corresponding error message).

Here you can change the button assignment of the shifting unit on the handlebar for shifting up and down to suit your preferences.

Set the desired gear, which is set automatically when you stop. To do this, Start.Select or Pre.Select must be enabled.
Activating Start.Select allows you to set the gear that is automatically engaged when you stop. This enables energy saving when starting off.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

34

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

As you roll, Pre.Select automatically switches to the gear that matches your speed. So, for example, you are always in the right gear on flowing trail sections, even without pedaling or manual shifting. When stopping, Pre.Select takes the gear specified here into account. Enter your target pedaling frequency here.

INFO-CIR

NOTICE Pre.Select never switches to a gear lower than the one you set here.

If, for example, the cranks were disassembled, or in the unlikely event that the system loses values, this can affect shifting or riding behavior. This is where you can start the calibration. You will be guided through the calibration steps on the display. Follow the instructions on the display and start calibration. Do not load the pedals during calibration.

Calibration is ongoing.

Calibration completed successfully.

Calibration could not be performed.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

35

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

An error occurred during calibration.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

36

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

ERROR MESSAGES

9.1 GENERAL INFORMATION
The parts of the e-bike system are permanently monitored during use and charging. The error code is shown on the display when an error is detected. Press on the rocker switch to acknowledge the error and switch back to the default screen on the display. If the error cannot be acknowledged, use the table in section 9.3.1 to eliminate it or contact your specialist dealer. Power assistance is automatically stopped where necessary depending on the specific error code. You can still use the e-bike conventionally as a normal bicycle even if the motor no longer provides assistance. An error can be clearly categorised with the displayed category and the displayed code. A text which indicates the error category is also always displayed.

9.2 STATUS LED ON OPERATING ELEMENT AND DISPLAY
The operating element and the display each feature a status LED to indicate error statuses. The operating element’s LED is located in the rocker switch. It is in the top left-hand corner in Display Compact and in the top right-hand corner in Display Comfort.
The statuses are listed in the following table:

Colour Green Red Red

Flash sequence Continuously lit Continuously lit Flashing

Status
System must be connected to the maintenance tool at the specialist dealer’s.
Re-start the system if the status LED still lights up red. Have component replaced at the specialist dealer’s.
Re-start the system if the status LED still flashes red. Have component replaced at the specialist dealer’s.

9.3 INFORMATION / ERROR DISPLAY
There are four different types of error messages:

Type Information

Display White circle with black i

Warning Error

White triangle with black exclamation mark
Orange bar

Critical error

Orange bar and the rocker switch lights up red

Effect
Motor assistance available The message can be acknowledged by pressing the selection rocker switch.
Motor assistance available The message can be acknowledged by pressing the selection rocker switch.
No motor assistance Motor assistance is only available once the error has been rectified.
No motor assistance Motor assistance is only available once the error has been rectified and the system has been restarted.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

37

INSTRUCTION MANUAL INFORMATION

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

1. Error message 2. Error code 3. Current speed

WARNING

1. Error message 2. Error code 3. Current speed

ERROR / CRITICAL ERROR
1. Error message 2. Error code

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

38

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

9.3.1 ERROR TABLE
If the last two digits are listed with “xx” as a placeholder, this provides the specialist dealer with additional information for error analysis.

0A-xx up to 28-xx

Error code 0A-01, 0B-01 0A-02, 0B-02
0A-03, 0A-04, 0A-05, 0A-06, 0B-03, 0B-04, 0B-05, 0B-06 0A-07, 0B-07 0A-08, 0B-08 0A-0A, 0B-0A
0A-0B, 0B-0B 0C-00 0C-01

Error message displayed Remote motor communication error Remote display communication error
Remote battery communication error
Remote speed node communication error Remote gears communication error Remote charger communication error
Remote lock communication error Remote identification error Remote motor identification error

Action / Restriction
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

39

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 0C-02
0C-03, 0C-04, 0C-05, 0C-06
0C-07 0C-08 0C-0A
0C-0B 0D-01 0D-02
0D-03, 0D-04, 0D-05, 0D-06

Error message displayed Remote display identification error
Remote battery identification error
Remote speed node identification error Remote gears identification error Remote charger identification error
Remote lock identification error Motor authentication error Display authentication error
Battery authentication error

Action / Restriction
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

40

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 0D-07 0D-08 0D-0A
0D-0B 0E-xx 0F-00 0F-01 0F-02
0F-03, 0F-04, 0F-05, 0F-06
0F-07 0F-08

Error message displayed Speed node authentication error Gears authentication error Charger authentication error
Lock authentication error Remote authentication error Remote update error Motor update error Display update error
Battery update error
Speed node update error Gears update error

Action / Restriction
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

41

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 0F-0A
0F-0B 10-xx 11-xx 12-01 12-02
12-03, 12-04, 12-05, 12-06
12-07 12-08

Error message displayed Charger update error
Lock update error Remote software error Battery remote communication error Remote motor pairing error Remote display pairing error
Remote battery pairing error
Remote speed node pairing error Remote gears pairing error

Action / Restriction
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

42

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 12-0A
12-0B 13-xx 14-xx 15-01 15-02
15-03, 15-04, 15-05, 15-06
15-07 15-08

Error message displayed Remote charger pairing error
Remote lock pairing error Remote internal error Remote configuration error Remote motor pairing error Remote display pairing error
Remote battery pairing error
Remote speed node pairing error Remote gears pairing error

Action / Restriction
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

43

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 15-0A

Error message displayed Remote charger pairing error

15-0B 16-00 16-01 16-02

Remote lock pairing error Remote theft detection Motor theft detection Display theft detection

16-03, 16-04, 16-05, 16-06

Battery theft detection

16-07 16-08 16-0A

Speed node theft detection Gears theft detection Charger theft detection

Action / Restriction
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

44

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 16-0B 17-00 17-01 17-02
17-03, 17-04, 17-05, 17-06
17-07 17-08 17-0A
17-0B 18-00 18-01

Error message displayed Lock theft detection Remote defective component Motor defective component Display defective component
Battery defective component
Speed node defective component Gears defective component Charger defective component
Lock defective component Remote start error Motor start error

Action / Restriction
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

45

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 18-02

Error message displayed Display start error

18-03, 18-04, 18-05, 18-06

Battery start error

18-07 18-08 18-0A

Speed node start error Gears start error Charger start error

18-0B 19-xx 1A-01
1A-02
1B-xx

Lock start error Remote safety error Manipulation detected
Manipulation detected Speed sensor missing
System voltage error

Action / Restriction
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Re-insert the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove the battery from the holder, check
contacts and clean if necessary. 4. Re-insert the battery and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Disconnect the charger from the system and
socket. 4. Wait until status LED goes out. 5. Check plug contacts on the e-bike and charger
and clean if necessary. 6. Reconnect the charger to the socket. 7. Reconnect the charger to the system and start
the system. 8. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Check mounting position of the magnet and speed sensor.
2. Restart the system. 3. If the problem persists, please contact your
specialist dealer.
1. Check mounting position of the magnet and speed sensor.
2. Restart the system. 3. If the problem persists, please contact your
specialist dealer.
1. Check whether the correct battery is installed (36V / 48V).
2. Restart the system. 3. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

46

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 1C-xx
1D-xx 1E-xx 1F-xx 20-xx 21-xx 22-xx 23-09 23-0A 23-0B 23-0C 23-xx 24-01 25-xx 26-xx

Error message displayed Bluetooth module error
EMS mode active
OEM mode active
TEST mode active
Reserve mode active (info text)
Lock error
Full charge cycle active Tire pressure sensor error Battery weak front Tire pressure sensor error Battery weak rear Tire pressure sensor error Battery weak front right Tire pressure sensor error Battery weak rear right Tire pressure sensor error Charger multi-battery error
1-Wire communication error
Battery lock (ABUS) error

Action / Restriction
1. Restart the system. 2. Restart FIT E-Bike Control (app), update if
necessary. 3. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Charge the battery. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
Information: Battery is charged for calibration despite Long Life mode 100%.
Sensor needs to be replaced soon, please contact your specialist dealer.
Sensor needs to be replaced soon, please contact your specialist dealer.
Sensor needs to be replaced soon, please contact your specialist dealer.
Sensor needs to be replaced soon, please contact your specialist dealer.
Sensor may need to be replaced, please contact your specialist dealer.
1. Charge each battery individually. 2. Have the charger software update done at your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

47

INSTRUCTION MANUAL 29-xx up to 47-xx

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 29-xx
2A-xx

Error message displayed Display communication error
Display software error

2B-xx

Display authentication error

2C-xx 2D-xx

Display internal error Display identification error

2E-01

Display overheated Screen brightness reduced

48-xx 66-xx (Pinion)

Action / Restriction
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Replace the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Replace the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Switch the system off. 3. Remove display from holder, check contacts and
clean if necessary. 4. Replace the display and start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Cool display by riding. 2. Protect the display from direct sunlight.

Error code 48-xx
49-07

Error message displayed Motor communication error
Motor error E-bike battery not ready

Action / Restriction
1. Check plug contacts on the battery and bicycle and clean if necessary.
2. Restart the system. 3. If the problem persists, please contact your
specialist dealer.
1. Switch the system off. 2. Remove the battery. 3. Check plug contacts on the battery and e-bike
and clean if necessary. 4. Insert the battery. 5. Restart the system. 6. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

48

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 49-09, 49-0A

Error message displayed Motor error

49-0B 49-0C

Motor error Pinion change detected
Motor error Tampering detected

49-0D

Motor error

49-xx 4A-xx

Motor error Motor temperature error

4B-xx 4C-xx 4D-03

Motor speed sensor error
Motor torque sensor error
Gear error Release pedals

Action / Restriction
1. Check if one or both trigger buttons are pressed constantly, if so: Release buttons.
2. Restart the system. 3. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Check mounting position of the magnet and speed sensor.
2. Start calibration via display gear menu (follow instructions).
3. Restart the system. 4. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Check light cables and lights for short circuit;
check installed lamps for compatibility with the bike and replace them if necessary. 3. If the problem persists, please contact your specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Switch the system off. 2. Allow the motor to cool down and, if necessary,
clean the motor’s ventilation vents. 3. Switch on the system. 4. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Check mounting position of the magnet and
speed sensor. 3. If the problem persists, please contact your
specialist dealer.
1. Restart the system with no pressure on the pedals.
2. If the problem persists, please contact your specialist dealer.
1. Release pedals so that wheel can shift into the required speed for the pushing aid, wait 3 seconds.
2. Restart the system with no pressure on the pedals.
3. Start calibration via display gear menu (follow instructions).
4. If the problem persists, please contact your specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

49

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 4D-08

Error message displayed
Gear error Stop, release pedals

4D-11 4D-xx

Gear error Shifting blocked for 1 min
Gear error

4E-xx

Motor cadence sensor error

4F-xx

Motor authentication error

51-01, 51-02

Motor voltage error E-bike battery voltage error

52-xx

Motor angle sensor error

53-xx

Motor software error

67-xx up to 85-xx and FF-xx

Action / Restriction
1. Stop the bike, release the pedals, wait 3 seconds. 2. Restart the system with no pressure on the
pedals. 3. Start calibration via display gear menu (follow
instructions). 4. If the problem persists, please contact your
specialist dealer.
1. Wait 1 minute. 2. Restart the system. 3. Start calibration via display gear menu (follow
instructions). 4. If the problem persists, please contact your
specialist dealer.
1. Release pedals, wait 3 seconds. 2. Restart the system with no pressure on the
pedals. 3. Start calibration via display gear menu (follow
instructions). 4. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Check lights and associated cables for damage. 3. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

Error code
67-01, 67-03, 67-06, 67-12
67-02, 67-07, 67-08, 67-09, 67-13
67-05, 67-0A, 67-0B, 67-11, 67-15

Error message displayed Battery voltage error Battery voltage error
Battery voltage error

Action / Restriction
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Connect the battery to the charger. 2. Restart the system. 3. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

50

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code
68-01, 68-05, 68-06, 68-07, 68-09, 68-16, 68-17, 68-18, 68-19, 68-1A
68-02, 68-03, 68-08, 68-0A

Error message displayed Battery current error Discharging error
Battery current error Charging error

68-04, 68-11, 68-12

Battery current error Short circuit

68-0B, 68-13

Battery current error Overcurrent error

68-14

Battery current error Start error

68-15

Battery current error

69-01, 69-08

Battery temperature error

69-02, 69-09

Battery temperature error

69-03, 69-0C

Battery temperature error

Action / Restriction
1. Switch the system off. 2. Remove the battery. 3. Re-insert battery. 4. Start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Disconnect the charger from the battery. 2. Reconnect the charger and start charging. 3. If the problem persists, please contact your
specialist dealer.
1. Switch the system off. 2. Remove the battery. 3. Re-insert battery. 4. Start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Switch the system off. 2. Remove the battery. 3. Re-insert battery. 4. Start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Switch the system off. 2. Remove the battery. 3. Re-insert battery. 4. Start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Switch the system off. 2. Remove the battery. 3. Re-insert battery. 4. Start the system. 5. If the problem persists, please contact your
specialist dealer.
1. Disconnect the charger from the battery. 2. Allow the battery to cool down (> 60 minutes). 3. Restart the charging process. 4. If the problem persists, please contact your
specialist dealer.
1. Turn off the e-bike. 2. Allow the battery to cool down (> 60 minutes). 3. Start the system. 4. If the problem persists, please contact your
specialist dealer.
1. Bring the battery to a warmer place. 2. Allow the battery to warm up (> 30 minutes). 3. Restart the charging process. 4. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

51

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 69-04, 69-0D

Error message displayed Battery temperature error

69-05, 69-0A, 69-0F, 69-11, 69-12

Battery temperature error

69-06, 69-0B, 69-10

Battery temperature error

69-13 6A-xx

Battery temperature error Battery software error

6B-xx 6C-xx

Battery hardware error Battery communication error

6D-xx

Battery authentication error

6E-xx

Battery unknown error

Action / Restriction
1. System operating below the permissible temperature.
2. Allow the battery to warm up in a warm environment (> 30 minutes).
3. Start the system. 4. If the problem persists, please contact your
specialist dealer.
1. Turn off the e-bike. 2. Allow the battery to cool down ((> 60 minutes). 3. Start the system. 4. If the problem persists, please contact your
specialist dealer.
1. System operating below the permissible temperature.
2. Allow the battery to warm up in a warm environment (> 30 minutes).
3. Start the system. 4. If the problem persists, please contact your
specialist dealer.
1. Start the system. 2. If the problem persists, please contact your
specialist dealer.
1. Check whether the correct battery is installed (36V / 48V).
2. Check the plug contacts on the battery and bicycle and clean if necessary.
3. Restart the system. 4. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Check whether the correct battery is installed (36V / 48V).
2. Check the plug contacts on the battery and bicycle and clean if necessary.
3. Restart the system. 4. If the problem persists, please contact your
specialist dealer.
1. Check whether the correct battery is installed (36V / 48V).
2. Check the plug contacts on the battery and bicycle and clean if necessary.
3. Restart the system. 4. If the problem persists, please contact your
specialist dealer.
1. Check whether the correct battery is installed (36V / 48V).
2. Check the plug contacts on the battery and bicycle and clean if necessary.
3. Restart the system. 4. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

52

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code FF-xx

Error message displayed Battery start error

86-xx up to 8A-xx

Action / Restriction
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

Error code 86-xx
87-xx

Error message displayed Speed node software error
Speed node authentication error

Action / Restriction
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

95-xx up to 99-xx

Error code 95-xx

Error message displayed Charger software error

96-xx

Charger voltage error

97-xx

Charger current error

98-xx

Charger temperature error

Action / Restriction
1. Check whether the correct battery is installed (36V / 48V).
2. Disconnect the charger from the system and socket.
3. Wait until status LED goes out. 4. Reconnect the charger to the socket. 5. Reconnect the charger to the system. 6. If the problem persists, please contact your
specialist dealer.
1. Check whether the correct battery is installed (36V / 48V).
2. Disconnect the charger from the system and socket.
3. Wait until status LED goes out. 4. Reconnect the charger to the socket. 5. Reconnect the charger to the system. 6. If the problem persists, please contact your
specialist dealer.
1. Check whether the correct battery is installed (36V / 48V).
2. Disconnect the charger from the system and socket.
3. Wait until status LED goes out. 4. Reconnect the charger to the socket. 5. Reconnect the charger to the system. 6. If the problem persists, please contact your
specialist dealer.
1. Disconnect the charger from the battery. 2. Allow the charger to cool (> 30 minutes). 3. Restart the charging process. 4. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

53

INSTRUCTION MANUAL 8B-xx up to 92-xx

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Error code 8B-xx 8C-06
8C-xx

Error message displayed Gears authentication error
Gears hardware error Calibration required
Gears hardware error

9A-xx up to 9E-xx

Action / Restriction
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.
1. Calibrate the gears as described in the corresponding operating instructions.
2. If the problem persists, please contact your specialist dealer.
1. Restart the system. 2. If the problem persists, please contact your
specialist dealer.

Error code 9A-xx 9B-xx 9C-xx 9D-xx

Error message displayed Lock authentication error Lock blocked Lock hardware error Lock movement detected

Action / Restriction
1. Check whether an original FIT lock is installed. 2. Restart the system. 3. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Check lock for contamination. 3. If the problem persists, please contact your
specialist dealer.
1. Restart the system. 2. Check lock for damage. 3. If the problem persists, please contact your
specialist dealer.
1. Resend lock command 2. Restart the system. 3. Check lock for damage. 4. If the problem persists, please contact your
specialist dealer.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

54

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

10 CLEANING AND SERVICING
10.1 BASIC CLEANING
10.1.1 CLEANING THE DISPLAY AND OPERATING ELEMENT

INFO-CIR

NOTICE The display and operating element will be permanently damaged if water enters them.
Never immerse the display or operating element in water. Never clean with a pressure washer, water jet or compressed air. Never use cleaning agents. Remove the display from the e-bike before cleaning. Carefully clean the display and operating element with a soft, damp cloth.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

55

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

TROUBLESHOOTING

FAULT CLEARANCE AND REPAIR

11.1 TROUBLESHOOTING AND FAULT CLEARANCE
11.1.1 DRIVE SYSTEM OR DISPLAY DOES NOT START UP
If the display and / or the drive system do not start up, proceed as follows:
1. Check if the battery is inserted correctly. If not, insert the battery correctly. 2. Start the drive system. 3. If the drive system does not start, remove the battery, check the charging status and charge if necessary. 4. Clean all contacts with a soft cloth. 5. Insert the battery. 6. Start the drive system. 7. If the drive system does not start, contact the specialist dealer.

INFO-CIR

NOTICE If the battery terminal contacts are heavily soiled / oxidized. Take your e-bike to a specialist dealer for a detailed check.

11.1.2 ERRORS IN THE ASSISTANCE SYSTEM

Symptom Assistance is not available.
Assistance is not available.

Cause
Is the speed too high?
Is the battery charged sufficiently?
The motor may become too hot during rides at high temperatures, up long inclines or when carrying a heavy load for a long time. The rechargeable battery, display or operating element may be connected incorrectly, or one or more of them may have a problem. Are the pedals being pushed?
Is the system switched on?
Is the level of assistance set to OFF?

Remedy
1. Check display screen. The motor assistance is only active up to the maximum speed for which the e-bike is approved.
2. Check battery is charged. 3. Recharge the battery if it is almost flat. 4. Switch off the drive system. 5. Wait a moment and then check again.
6. Contact your specialist dealer.
1. Your e-bike is not a motorbike. Push the pedals.
2. Press on-off button (operating element) to switch on the system.
3. Set the level of assistance to FLY, FLEX, FLOW or ECO.
4. Contact your specialist dealer if you still feel that the no assistance is being supplied.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

56

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

Symptom The assisted journey distance is too short.
It is difficult to pedal.

Cause
The battery does not perform as well in winter weather.

Remedy This does not indicate a problem.

The journey distance can be shorter depending on the road conditions, the level of assistance and the total light usage time. Is the battery fully charged?
The battery is a consumable. Repeated charging and long periods of use cause the battery to degrade (loss of power). Are the tires pumped to an adequate pressure? Is the level of assistance set to OFF? The battery charge might be low.
Have you switched on the system with your foot on the pedal?

1. Check battery is charged. 2. Recharge the battery if it is almost flat.
3. If the distance covered with a fully charged battery has become shorter, the battery may be affected. Replace the battery with a new one.
4. If the distance you can cover with one single charge is very short, replace the battery with a new one.
1. Pump up tires.
2. Set the level of assistance to FLY, FLEX, FLOW or ECO.
3. Check battery is charged. 4. Recharge the battery if it is almost flat. 5. Switch on the system again without applying
pressure to the pedals. 6. If assistance is still not supplied, contact your
specialist dealer.

11.2 REPAIR
Special expertise and tools are required for many repairs. That is why only a specialist dealer may perform repairs.
11.2.1 ORIGINAL PART The individual e-bike parts have been carefully selected and matched to one other. Only original parts must be used for maintenance and repair. Observe the operating instructions for the new components.
11.2.2 REPLACING THE LIGHTS Replace components with ones in the right power class.
11.2.3 ADJUSTING THE HEADLIGHT The headlight must be positioned so that its beam hits the road surface 10 m in front of the e-bike.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

57

INSTRUCTION MANUAL

FIT DISPLAY COMPACT + FIT REMOTE BASIC / ESHIFT PINION

12 RECYCLING AND DISPOSAL
12.1 DISPOSAL

Mechanical and electrical equipment, accessories and packaging should be recycled in an environmentally sound manner. Don’t throw them in the garbage!
Only for EU countries: According to European Directives 2012/19/EU, 2006/66/EC and their transposition into national law, defective or unusable waste electrical and electronic equipment, rechargeable batteries and batteries must be collected separately and recycled in an environmentally sound manner.

FIT_Manual_Display_Compact_Remote_Basic_EShift_Pinion_V3_en | Version 03 | 24.10.2023

58

References

• E-bike system integration from Biketec Europe GmbH | Biketec Europe GmbH
• Declaration of conformity | Biketec Europe GmbH
• FIT e-bike system integration | Biketec GmbH
• Declaration of conformity of all our products | Biketec GmbH | Biketec GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>