Rezo K118 Bluetooth Speaker User Manual
- June 15, 2024
- Rezo
Table of Contents
BLUETOOTH SPEAKER
Rezo Light Motion K118
User manual
Thank you for purchasing Bluetooth Speaker Rezo Light Motion K118. Please carefully read user guide in properly and keep this for further reference.
Packing list
Key function direction
- Next track/Volume+
- Previous track/Volume-
- Power Button
- Mode button
- light button
- Type-C charging
- AUX Port
- TF card
- USB charging
Power On/Off
Power On: Long press the power button for 3 seconds in the shutdown state;
when the speaker starts up, the speaker will sound “ting, ting, ting, ting”
and the white light turns on.
Power off: Long press the power button for 3 seconds in the boot state to shut
down the speaker. The speaker will soung “ting, ting ting ting” and the white
light turns off.
Telephone function
When calling on phone, short press the power button to answer, double-click to
refuse, short press to hang up the call after connecting.
Mode button
Click on the”M”: bluetooth,AUX access, FM mode, TF card;
TWS function: While at the same time open two devices and not connected
in the bluetooth mode, long press series can connect two speakers together.
Light button
Long press “ ” close/open lighting effects, click to switch the lights change
effect.
Music Broadcast
Short press “ ” button when playing music, the player will play the last
track.
Long press “ ” to decrease the volume continuously.
Short press “ ” button when playing music, the player will play the last
track;
Long press ” ” to decrease the volume continuously.
Playing MP3 files from Micro SD or USB Device:
- Insert the USB drive into USB port or Micro SD card into TF Slot.
- Play, pause or skip a selected track using the controls on the speaker.
Note:
a. We cannot guarantee the support of all USB devices.
b. USB port does not support USB charging for external device.
Type-C charging
- Please use provided Type-C cable for charging, charging with a DC5V~1A USB power adapter.
- When the speaker is charging, the white light will flash; when fully charged it will light up.
Bluetooth Connection
- Press and hold the power key for 3s to start the machine, Bluetooth enters the pairing mode.
- Turn on the mobile phone, turn on Bluetooth, search for the Bluetooth code name “Rezo Light Motion K118” and click; after a few seconds, you will hear the prompt tone “ting,ting” of successful pairing and connection, the mobile phone displays connected.
- In subsequent use, as long as the device’s bluetooth is turned on, it can be automatically connected.
Note:
If you want to connect to another device, need to disconnect the bluetooth on
the current device which is connecting bluetooth to the speaker.
FM mode
Press the M button into FM mode, short press power button to search station
automatically, press again to stop searching. Then, short press “+”, “-” to
choose the FM station.
Note: In the FM mode, need in micro charging cable or AUX cable to
increase the FM radio signal.
Product parameters
Bluetooth Version: 5.1
Watts: 5W*2
Working Distance: 8 – 10m
Battery Capacity: 1200mAh
Voltage: DC 5V/1A
Attentions:
- Do not use abrasive cleaners to clean this product.
- Do not allow this product to be heated, close to fire source or direct sunlight for a long time. It will easy to burn and damage the electronic components.
- Do not attempt to disassemble this product to make any modifications.
- Do not use this product in the rain.
- lf you do not plan to use this product for a long time, please store it in a dry environment and charge the speaker at least once a month to prolong its life and avoid extreme temperatures and dust.
- lf you saw smoke coming out of the machine or other improper phenomenon , please contact the retailer to solve the issue immediately.
- Do not throw the machine
Note!
In order to improve product performance, our products are constantly updated.
lt is no additional notice about technical issues and this manual is for
reference only, please forgive. Thank you for your purchase.