PHILIPS WT490C LED Gen5 Pacific Luminaires Installation Guide

PHILIPS WT490C LED Gen5 Pacific Luminaires

Product Information

Specifications

• Product Name: Pacific LED gen5
• Luminare Type: Indoor
• LEDs: 10
• Voltage: 220V – 240V
• Frequency: 50Hz – 60Hz
• Minimum Distance from Surface: 60 cm
• Lifetime: 100,000 hours (L80)
• IP Rating: IP66
• Impact Protection: IK08
• Light Source Efficiency Class: C

Product Usage Instructions

Installation

1. Prevent water from entering the luminaire during installation and use. Refer to the manual for installation details.
2. Do not open the luminaire when it is powered up to avoid the risk of electrostatic discharge.
3. The housing is made of non-metallic material. Prevent dust accumulation on the surface of the housing.
4. Clean the luminaire only with a damp cloth containing antistatic agents.

Mounting Options

Ceiling Mounting (Standard Applications)

• For ceiling mounting, follow the standard installation instructions provided in the manual.

Wall Mounting Applications

• If you want to mount the luminaire on a wall in vertical and/or horizontal positions, you will need to use a special set of screws and nuts (WT470Z SCREW-VP SET (10PCS), EOC: 871869638509800, 12NC: 910925864392) supplied as accessories.

Electrical Connections

• The product comes with a Wieland connector (female) included in the box. Use this connector for electrical connections.

FAQ

Q: What is the maximum ambient temperature for the Pacific LED gen5?

• The maximum ambient temperature for the Pacific LED gen5 is T45.

Q: What is the lifetime of the Pacific LED gen5?

• The Pacific LED gen5 has a lifetime of 100,000 hours (L80).

Q: Can I clean the luminaire with any cleaning agent?

• No, you should only clean the luminaire with a damp cloth containing antistatic agents.

WHAT’S IN THE BOX

Features

• Prevent water from entering or in the luminaire during the installation and use phase.
• Refer to the manual for installation details.
• Do not open when power up, risk of electrostatic discharge!
• The housing is made of non-metallic material.
• Prevent dust accumulation on the surface of the housing.
• Clean a luminaire only with a damp cloth containing an antistatic agent.

Luminaire type| System flux [lm] NB-HRO, WB, VWB/ O| Driver type| P(W)| Max ambient temperature
---|---|---|---|---
WT495C L1200| 42S| 4200/ 4000| 75W PSU| 25,5| T55
35W PSD| 26,0
64S| 6400/ 6200| 100W PSU| 40,5| T60
100W PSD| 40,5
80S| 8000/ 7600| 100W PSU| 51,0
100W PSD| 51,0
WT495C L1800| 80S| 8000/ 7600| 100W PSU| 49,0
100W PSD| 48,5
100S| 10000/ 9600| 100W PSU| 62,0
100W PSD| 62,0

• The light source of energy efficiency class: C
• Lumen output provided for 4000K, 6500K options, in 3000K lumen output will be on average approx.7% less.

Dimension

INSTALLATION INSTRUCTION

Inrush current

PSED, SEIA version (Emergency Lighting)

For emergency lighting requires a DC power connection (186…250V DC)

Luminaire type| Rounded DC EL Power [W]| Rounded flux 830 [lm]| Rounded flux 840 [lm]
---|---|---|---
WT490C L700| 23S| 3,4| 320| 340
WT490C L1200| 35S| 4,4| 490| 520
42S| 5,0| 600| 640
64S| 8,0| 900| 690
80S| 9,7| 1100| 1200
100S| 11,6| 1400| 1500
WT490C L1600| 35S| 4,4| 490| 520
42S| 5,0| 600| 640
64S| 8,0| 900| 690
80S| 9,7| 1100| 1200
WT490C L1800| 80S| 13,6| 1100| 1200
100S| 13,6| 1400| 1500
120S| 13,6| 1700| 1800
150S| 16,6| 2100| 2300
Luminaire type| Rounded DC EL Power [W]| Rounded flux 830 [lm]| Rounded flux 840 [lm]
---|---|---|---

WT495C L1200

| 42S| 5,6| 600| 640
64S| 7,7| 900| 690
80S| 8,8| 1100| 1200
WT490C L1800| 80S| 8,7| 1100| 1200
100S| 10,6| 1400| 1500
 |

PSU 35W

|

PSD 35W

|

SIA 35W

|

PSD 60W

|

SIA 60W

|

PSU 75W

|

PSU 90W

|

PSD 90W

|

PSU 100W

|

PSD 100W

|

SIA 90W

|

PSU 100W

|

PSD 100W

---|---|---|---|---|---|---|---|---|---|---|---|---|---
ELECTRICAL CHARACTERISTICS| DRIVER| TYPE| WT490C 23S (PSU), 35S (PSU)| WT490C/ WT495C 23S (CLO), 35S (CLO), 42S| WT490C 35S (CLO), 42S (CLO) (SIA)| WT490C 64S (CLO), 80S (CLO), 100S (CLO) (PSD)| WT490C 64S (CLO), 80S (CLO), 100S (CLO)| WT490C 42S, 64S, 80S, 100S, 120S (PSU)| WT490C 100S (PSU)| WT490C 100S (CLO), 120S (CLO) (PSD)| WT490C 150S (PSU)| WT490C 150S (CLO) (PSD)| WT490C 80S (CLO), 100S (CLO), 120S (CLO), 150S (CLO) (SIA)| WT495C 64S, 80S, 100S (PSU)| WT495C 64S, 80S, 100S (CLO)(PSD)
Leak current [mA rms]| 0,7| 0,5| 0,5| 0,5| 0,5| 0,3| 0,7| 0,5| 0,5| 0,5| 0,5| 0,5| 0,5
Imax [A]| 17,0| 23,1| 20,0| 25,1| 23,0| 19,0| 21,0| 25,0| 22,5| 10,0| 25,0| 9,0| 4,5
Tref [μs]| 244| 221| 216| 214| 194| 280| 316| 230| 30| 35,9| 230| 65| 1000
MCB-16A| 33| 22| 24| 21| 24| 24| 19| 20| 23| 18| 20| 26| 24
No of Luminaires per MCB| Cable Section [mm 2]| 1.5mm2, 2.5mm2 / TI3 [EN 50525- 1]
B-6A| 13| 8| 9| 8| 9| 9| 7| 8| 9| 7| 8| 9| 5
B-10A| 20| 13| 15| 13| 15| 15| 11| 12| 14| 11| 12| 15| 15
C-10A| 34| 22| 24| 21| 24| 24| 19| 20| 23| 18| 20| 29| 24
B-13A| 26| 17| 19| 17| 19| 19| 15| 16| 18| 14| 16| 19| 19
C-13A| 44| 29| 32| 28| 32| 32| 25| 27| 29| 24| 27| 32| 32
B-16A| 33| 22| 24| 21| 24| 24| 19| 20| 23| 18| 20| 26| 24
C-16A| 56| 37| 36| 35| 36| 36| 32| 34| 29| 20| 34| 36| 40
Cable Section [mm 2]| 2.5mm2 / TI3 [EN 50525- 1]
B-20A| 41| 27| 30| 26| 30| 30| 23| 25| 28| 22| 25| 30| 30
C-20A| 45| 45| 36| 43| 36| 36| 35| 35| 29| 29| 41| 36| 49

Maintenance instructions

To ensure the lighting quality of this unique LED lighting concept a few instructions are regarding the maintenance of this LED luminaire:

1. Do not touch electronic components!

   • Electronic components are under high voltage.
   • Electronic components are ESD-sensitive.

2. During installation or when maintaining the luminaire please use static-free gloves to avoid marks on the luminaire.

3. To remove dirt and spots use the following:
   Dust: only use microfiber cloths Fingerprints, etc.: use a cleaner for synthetic materials with antistatic properties.

4. Do not stare into the LED light beam.

5. To avoid scratches and dirt on optical parts remove protective foil after installation.

6. The luminaire shall be installed by a qualified electrician and wired under the latest IEE electrical regulations or the national requirements.

7. Do not touch either the LEDs or the contacts into the connector Install carefully the optical plates to protect the boards.

8. Driver insulation: Basic according to IEC 61847-1.

QR CODE

• To get an overview of all spare parts for a luminaire, please refer to detailed instructions in the service manual available via the Signify Service tag apps (Android and iOS).
• Disconnect before servicing
• Luminaire has basic insulation between Low Voltage supply and control conductors.
• The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer his service agent or a similarly qualified person.
• Storage, installation, use, operation, and maintenance of the products need to be performed exactly according to the instructions in this manual and/or other instructions as may be provided by us to guarantee the safe use of the product over its entire lifetime.
• Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with the indication of torque strength on the drawing need to be tightened using a calibrated torque wrench.
• Pre-assembled bolts need to be retightened again to the required torque specification to ensure maximum strength over a lifetime.
• This product contains a light source of energy efficiency class: see table or label.
• Printed in Poland
• Data subject to change without notice
• Keep for future reference:www.philips.com/lighting.

References

• Sustainable LED lighting solutions | Philips lighting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>