PHWALK B0C3G76JGS Heavy Duty Drawer Slides Instruction Manual
- June 15, 2024
- PHWALK
Table of Contents
PHWALK B0C3G76JGS Heavy Duty Drawer Slides
(Matters needing attention)
- Due to different use scenarios, this product does not contain screws.
- You can buy M6 screws yourself.
- When installing, push the inner ball bearing to the top of the guide rail, and then connect it to the guide rail to complete the installation.
INSTALLATION REQUIREMENTS
Features
- Load capacity:220kg/pair(18″ )
- Available in lengths:28inch-60inch
- Material: Cold rolled Steel Q235
- 3-Fold Full Exiension
Note: Mounting screws are not included. You can purchase M6 screws according to your slide rail installation scene.
How to Choose Size
Measure the depth of the drawer.’ The length of the slide should be < the length of the drawer.
- For example, if the depth is 13in/330mm, choose 12in/300mm drawer slides.
- Deviations of O. 7in/25mm-1 in/30mm are suitable
Installation Precautions
- 3″/76mm
- 0.76±0.01″ /12.7±O.2mm
Installation Precautions:
- The installation of the slide rails on both sides should be horizontally aligned, and the screws should be fixed in place.
- Mark on the drawer and slide
- Mount outer slide inside cabinet
- Mount inner slide on drawer
- Push drawer into cabinet
Please note a few things to consider during installation.
- When marking hole placements you MUST NOT drill through the slide holes during installation. Doing this will create metal filings that lodge in the tracks resulting in rough running and ultimately, failure of the slides.
- There must be no rubbing of the fixing against the moving slides. This will cause the failure of the slide.
- Our slides are designed to be side-mounted and paired side by side. Mounting them vertically one above the other or in a flat position will void the warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>