GLOBO 58903 Blade floor lamp Instruction Manual

June 15, 2024
GLOBO

GLOBO-LOGO

GLOBO 58903 Blade floor lamp

GLOBO LIGHTING Assembly Instructions

  • This document provides assembly instructions for the GLOBO LIGHTING model number 58903.
  • It includes specifications for the light bulbs required and contact information for GLOBO Handels GmbH.

Specifications

Component Specification
Main Light Bulb 1 x Max 60W E27 230V~ 50Hz
Flexible Arm Light Bulb 1 x Max 40W E14 230V~ 50Hz
Model Number 58903

Manufacturer Details

Assembly Diagram Description

  • The assembly diagram illustrates the GLOBO LIGHTING floor lamp with a main upward-facing light and an adjustable reading light on a flexible arm.
  • The main light is at the top of a straight central pole, and the flexible arm extends from about halfway up the pole.
  • Each light source has its own power requirements and bulb type, which are detailed in the specifications table.

Main Light Assembly

  • The main light assembly consists of a large bowl-shaped shade attached to the top of the central pole.
  • It requires a 60W E27 bulb. The electrical cord runs down the pole and ends with a plug for a power outlet.

Flexible Arm Light Assembly

  • The flexible arm light can be positioned as needed and is designed for a 40W E14 bulb.
  • The arm is adjustable and can rotate up to 350 degrees for directional lighting.
  • There are two switches on the base of the flexible arm for turning the lights on and off.

FAQ

  • What type of bulbs do I need for this lamp?
    • You will need one 60W E27 bulb for the main light and one 40W E14 bulb for the flexible arm light.
  • Where can I find replacement bulbs?
    • Replacement bulbs can be found at most hardware stores or through online retailers. For sustainable LED lighting solutions, you may visit Philips lighting.
  • How do I contact GLOBO Handels GmbH for support?
  • Can the reading light be adjusted?
    • Yes, the reading light on the flexible arm can rotate up to 350 degrees and can be bent to direct light as needed.
  • Is there a separate switch for each light?
    • Yes, there are two switches located on the base of the flexible arm. Each switch controls one of the two lights.

Overview

  • 1 x Max 60W E27
  • 230V~ 50Hz

GLOBO-58903-Blade-floor-lamp-FIG-1

  • 1 x Max 40W E14
  • 230V~ 50Hz

CONTACT

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals