SONY MB-L18 Mounting Bracket Instruction Manual

: June 15, 2024
: Sony

Table of Contents

Important Information
Monitor that can be used
General
Supplied Accessories
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SONY MB-L18 Mounting Bracket

Important Information

Before operating the unit, please read this manual thoroughly and retain it for future reference.

For the customers in the U.S.A.
SONY LIMITED WARRANTY – Please visit www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

For the customers in Canada

SONY LIMITED WARRANTY – Please visit www.sony.com/psa/warranty for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

For the customers in Europe

Sony Europe B.V. – Standard Warranty and Exceptions on Standard Warranty. Please visit https://pro.sony/supportservices/primesupport/support- professional-solutions-europe-standardproduct-warranty for important information and complete terms and conditions.

For the customers in Korea

SONY LIMITED WARRANTY – Please visit https://pro.sony/ko_KR/support- services for important information and complete terms and conditions of Sony’s limited warranty applicable to this product.

Monitor that can be used

LMD-A180

General

MB-L18 is a mounting bracket specifically designed for mounting the LMD-A180 Sony monitor directly onto a 19-inch EIA standard rack. Also, refer to the Operating Instructions of the monitor.

Caution

Use the MB-L18 within the temperature range 0 °C to 35 °C (32 °F to 95 °F).
Connect to earth from behind the rack.
Be sure to confirm that the rack is stable. If not, the rack may fall after you install the monitor.
Be sure to hold the bottom of the monitor or the mounting bracket when mounting them to the rack.
Be careful not to catch your fingers between the monitor and rack.
Some parts of the mounting bracket are sharp. Take care that your fingers do not get hurt.

Notes

Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD PARTIES.
SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.

Supplied Accessories

Mounting Bracket (2)
⊕M4×16 screws (6)
Mounting Instructions (1 set)

Remove the stand. A
For the method to remove the stand, refer to the Operating Instructions of the monitor.
Attach the Mounting Bracket to the monitor using the six supplied screws (three screws per side on the left and right sides). B
Attach to the rack with four screws. C

Note
Screws for attaching to the rack are not supplied. Obtain the appropriate screws.