KOLLEKTIVWERKS HYU7ENLB No Drill Center Mount License Plate Holder Installation Guide

KOLLEKTIVWERKS HYU7ENLB No Drill Center Mount License Plate Holder

Product Information

Specifications

• Product Name: No Drill Center Mount License Plate Holder
• SKU: HYU7ENLB
• Compatible Car Model: Hyundai 7th Gen Elanta N-Line
• Email Support: support@kollektivwerks.com
• Revision: 00
• Material: Metal
• Color: Black
• Weight: Not specified

Product Usage Instructions

Installation Guide

• Step 1: Insert the back plate (HYU7ENLB-B) into the car grille, ensuring that the writing is upright. Bolt the back plate together with the front plate (HYU7ENLB-F) using two M6x35mm bolts. Do not use power tools and avoid over-tightening.
• Step 2: Install the license plate bracket (KW-NA-LPB-XXX) as shown in the diagram. Center the bracket and tighten it securely. Again, avoid using power tools and over-tightening.
• Step 3: Install the license plate onto the license plate bracket. Use M6x14mm bolts if you are using a license plate cover, otherwise use M6x8mm bolts. Make sure to place a washer between the bolt head and the license plate. Tighten the bolts securely.
• Step 4: Enjoy your new KW license plate holder!

FAQ

• What should I do if I have trouble during installation?
  If you encounter any difficulties during installation, please contact our customer support team at support@kollektivwerks.com for assistance.

• Can I use power tools to install the license plate holder?
  No, it is not recommended to use power tools for installation. Please follow the provided instructions and avoid over-tightening the bolts.

• Can I use the license plate holder with a license plate cover?
  Yes, you can use a license plate cover with the license plate holder. In that case, use M6x14mm bolts instead of M6x8mm bolts.

• Is the license plate holder compatible with all car models?
  No, this license plate holder is specifically designed for Hyundai 7th Gen Elanta N-Line. It may not fit properly on other car models.
  For any further questions or concerns, please email our customer support at support@kollektivwerks.com.

Bill of material

Component list

IMPORTANT!
To be installed in highlighted location only!

Assembly Side View

installation guide

1. Insert back plate into the grille and bolt together with front plate. Ensure writing is upright .
   • DO NOT USE POWER TOOLS!!
   • DO NOT OVER TIGHTEN!!

2. Install bracket as shown. Center bracket and tighten. Ensure writing is upright.
   • DO NOT USE POWER TOOLS!!
   • DO NOT OVER TIGHTEN!!

3. Install license plate to license plate bracket.
   Install M6x14mm bolts with a license plate cover otherwise use M6x8mm bolts.

4. Enjoy your new KW license plate holder!

CUSTOMER SUPPORT

For customer support please email support@kollektivwerks.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>