CHAMPION 100719 Electric Start Inverter Generator User Guide
- June 15, 2024
- Champion
Table of Contents
CHAMPION 100719 Electric Start Inverter Generator
WARNING
Read the ENTIRE operator’s manual to become familiar with the product’s
features before operating.
Failure to operate the product correctly can result in damage to the product,
and personal property and cause serious injury or even death.
Set-Up
- Open shipping carton.
- Remove brackets.
- Attach wheel kit.
- Connect the battery.
Add oil. Assembly > Add Engine Oil.
Recommended: 10W-30, up to 37.2 fl. oz. (1100 ml) DO NOT overfill. MAKE SURE SHIPPING BRACKETS ARE REMOVED BEFORE ADDING OIL Move the generator outdoors. Move the generator to an open, outdoor area. Point exhaust away from people and buildings. Never run a generator inside a home or garage.
Keep all objects at least 5 feet (1.5 m) from the generator. Heat from the muffler and exhaust gas can ignite combustible materials.
Add fuel. Assembly > Add Fuel DO NOT use E15 or E85.
DO NOT plug in any electrical devices
NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!
Electric Start
- Turn the EZ Start Dial to the “CHOKE” position.
- Press and hold the ignition switch.
- Turn the EZ Start Dial to the “RUN” position.
Manual Start
- Turn the EZ Start Dial to the “CHOKE” position.
- Remove the maintenance cover on the right side of the control panel.
- Pull the recoil to start the engine.
- Turn the EZ Start Dial to the “RUN” position.
Plug in. Operation > Connecting Electrical Loads
Visit our YouTube channel to watch our how-to videos and subscribe to View our latest videos on our Champion Power Equipment products!
NEED ASSISTANCE OR HAVE A QUESTION?
18773380999 GIVE US A CALL.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>