Trygg 2400 Lumen 2400L Cykelljus User Manual

Trygg 2400 Lumen 2400L Cykelljus

Product Information

Specifications

• Product Name: [Product Name]
• Model Number: [Model Number]
• Power Capacity: 4500 mAh
• Input Voltage: 5V
• Output Current: 0.5A

Product Usage Instructions

Mounting
To mount the product, follow these steps:

1. [Step 1]
2. [Step 2]
3. [Step 3]

Charging and Powerbank
The product features a USB port for charging devices such as phones, bike computers, and navigation systems. The power bank has a capacity of 4500 mAh and supports a maximum input voltage of 5V.

To charge devices using the power bank, follow these steps:

1. Connect the charging cable to the power bank.
2. Connect the other end of the cable to your device.
3. Ensure that the device is compatible with a maximum input voltage of 5V.
4. Once connected, the power bank will start charging the device.

Modes and Approximate Burn Time
The product features different modes and offers an approximate burn time. To switch between modes and understand the burn time, follow these instructions:

1. [Step 1]
2. [Step 2]
3. [Step 3]

Frequently Asked Questions (FAQ)

How do I charge the power bank itself?
To charge the power bank, follow these steps:

1. [Step 1]
2. [Step 2]
3. [Step 3]

Can I charge multiple devices at the same time?
No, the power bank can only charge one device at a time.

What should I do if the product is not functioning properly?
If you are experiencing any issues with the product, please refer to the troubleshooting section in the user manual or contact our customer support for assistance.

SPECIFICATION

• LED types: 5 x super bright XHP50 LEDS
• Battery: built-in rechargeable 18650 li-ion 6400 mAh/3.7V
• Approximate charging time: 6:00 hours (1A),
• USB-C connector Modes: High beam and low beam: 3 x steady;
• High beam/low beam: 3 x steady, low/fast flashing
• Total number of modes: 13
• Main material: aluminium, plastic ABS, polycarbonate
• Waterproof: IP65
• Dimensions: 107 x 41 x 37 mm
• Weight: 265 g (with bracket)
• Functions: Power Bank (capacity: 4500 mAh / 5V / 0.5A)
• Two light beams: high beam (6500K), low beam (6500K)

CONTENTS

• Headlight
• Aluminium bracket (Diameter 35 /31.8 /22.2 mm)
• GoPro® standard bracket
• USB-C type cable

ASSEMBLY

Attach the bike bracket to the bike’s handlebars

1. Attach the light unit to the bicycle bracket. Push the light back onto the bracket until it clicks into place.
2. The spring clip locks the lamp in the bracket.
3. Press the side spring buckle to release.
4. Move the light forward to disassemble the light.

CHARGING AND POWER BANK

• Hold any button to turn on/off high beam or low beam.
• Press to change HIGH BEAM mode.
• Press to change LOW BEAM mode.
• Double-click any button to turn on both high beam and low beam at full power, then continue clicking a button to change the mode of both beams

MODE  AND APPROXIMATE BURNING TIME

DIGITAL POWER INDICATOR

The blue illuminated digits clearly indicate the charge level of the battery.

WARNINGS AND ADVICE

• If you do not use the battery for a long time, make sure to fully charge it every three months. Store the battery in a cool and dry place. Recharge the battery after each long period of use. WARNING! Do not charge above 5 V to avoid damage to the battery. The charging time depends on the energy source. The lamp may get hot when in use, provide sufficient airflow for cooling, if this is not possible, switch to a dimmer mode.
• Keep away from flammable objects while charging, as this may cause fire or battery explosion.
• Always charge the battery in a well-ventilated room. Never connect or disconnect the plug or cord with wet hands while charging. Do not connect or disconnect the plug or cord when they are wet, it may cause electric shock. Do not charge devices at night or during absence. It is normal for the battery to reach high temperatures during charging (up to 40°C), as the chemicals in the battery react. If the battery is not fully discharged before charging, it may also become hot. Several factors can affect the durability of the battery: the type of cell load, the maintenance routine, the temperature and the number of charges, etc. Normally, the higher the battery capacity, the longer the burning time.
• The internal battery should maintain 80% efficiency during two years of operation under normal use!
• Battery capacity can become inefficient at approximately 80% of its value after 300-500 charge/discharge cycles. The battery can have a life of 3 years under good maintenance.
• The lamp should not be exposed to temperatures higher than 40°C High power lighting can interfere with the work of other devices such as: wireless bike computers, GPS navigation. The warranty does not cover damage caused by use, dropping, lack of maintenance or attempted repairs.

SIMPLE PROBLEMS – ANALYSIS AND SOLUTION
Problem : The light does not turn on, Solution: Check if the battery still has power. Check if the power button is pressed firmly.

HOW TO CLEAN AND CARE FOR THE LIGHT

• Be sure to clean dust and dirt from the light with a soft, damp cloth after each turn.
• Water resistance is for rainwater only. Do not submerge the battery or the entire light in water during cleaning

SAFETY DURING CYCLING

• The lamp is designed for bicycle use.
• It is recommended to bring a flash.
• Be careful when handling, the light can get hot.
• Unplug the light if not in use.

Pull out the plug by the plug, never by the cable

• Provide adequate airflow to the light for cooling during use.
• Do not check any part of the system underwater.
• Do not look directly at the light.
• Do not leave the light on and unattended.
• Keep the light away from fire and flammable materials.
• Do not store the main unit when it is hot or immediately after use.
• Disconnect the light, charger and cable when the battery is fully charged.
• This light is for bicycle use only.
• Do not disassemble the light.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>