BOWJETE SK-01 Electric Heated Socks User Manual

SK-01 Electric Heated Socks
Model: SK-01
Ring heating makes your feet warmer

Packing List:

PRODUCT PARAMETERS

Rated voltage:5V/2A
Charging time:5-6H S
Weight(g):About 510g
capacity:5000mAh
Rated power:6W
Service times full power:3-11H
Single battery
Socks material: 22.5% viscose fiber, 52.5% nylon, 10% polyester, 15% spandex.

WASHING INSTRUCTIONS:

1. The water temperature should not exceed 122°F
2. The battery must be removed before cleaning, and the battery connecting wire must be sorted and put back into the battery bag.(note that the battery cannot ne washed with water)
3. Socks must be machine washed after being put into the laundry bag. It is recommended to wash them by hand.
4. Turn the power cord out and dry it naturally. Do not use a hightemperature iron or dry it at high temperature.

BATTERY CONTROL INSTRUCTIONS:

1. Check the battery level of the special battery for socks, and charge them to the full state.
2. Distinguish between left and right socks and wear them correctly, keep the battery pocket on the outside of the shins.
3. When not using the product, please unplug the plug from the battery for storage.
4. Tie the battery to your calf, then put on socks, insert the typeC plug into the battery.
5. The green indicator of the battery is the power indicator, which corresponds to: four indicators: 100% power; Three indicator lights: 75% power; Two indicator lights: 50% power; One indicator light: 25% power. The red indicator light is the gear indication, which corresponds to: four indicator lights: four gears (the highest temperature gear); Three indicator lights: third gear (sub high temperature gear); Two indicator lights: second gear (medium temperature gear); One indicator light: first gear (low temperature gear).
6. Battery button: long button press for 3 seconds to switch the machine on and off. Short press the case to switch gears, and the default fourth gear (high temperature gear) works when starting up. Press the button gently to switch between gears 4 and 1.
7. After the battery is turned on, if the sock type-C plug is not inserted within 30 seconds, the device will automatically shut down. If you want to continue to use it, you need to restart it.

Battery control instructions

• The following data are laboratory test data at room temperature of 77 F.

Light Status| Current Mode| Reference Temperature(F)| Reference Endurance(H)
---|---|---|---
| 4| 155±3| 3-3.5H
| 3| 141 ±3| 4-4.5H
| 2| 122±3| 6-6.5H
| 1| 104±3| 10-10.5H

PRECAUTIONS:

1. It is forbidden to approach high-temperature, flammable or explosive objects.
2. Do not hit the battery with force, and do not disassemble or reassemble it.
3. If the battery is not used frequently it is recommended to recharge and activate it every 60 days.
4.  It is recommended not to use high temperature for a long time to avoid skin discomfort.
5. Keep the battery in good condition. The battery shall be stored in a dry and cool environment.
6. Prevent low-temperature burns (if the human body is in a low-temperature environment, the body feels dull, and there are differences in physical fitness. Please lower the temperature in time when the body feels slightly burning.

APP TEMPERATURE CONTROL INSTRUCTIONS:

1. Use your mobile phone to scan the QR code on the last page to download the Bluetooth temperature control APP (WARM UPING)
2. The battery must be turned on to use the app function. When t is turned off, the phone will not be able to search for the battery. After turning off the battery through the mobile app, you need to turn it on manually from the battery button.
3. Turn on the mobile phone positioning and Bluetooth functions for APP Bluetooth control.
4. If the mobile app app is not connected to the battery device after the battery device is powered on, please check whether other permissions of the mobile app are opened.
5. If you have more than two battery devices, it is recommended to turn off all devices and only turn on two battery devices for app connection to avoid confusion.
6. After opening the battery, open the mobile application, and the mobile application will automatically connect to the battery device without binding and manual connection.
7. It is recommended not to use multiple devices at the same time. Please keep the unused devices off.

How to download APP?

1. Scan QR code below to download APP.
2. Seach “WARM UPING” on phone APP store

| |
---|---|---
https://play.google.com/store/apps/details?id=com.geecare.hotsocks| http://idownload.warmuping.kejzn.com/| http://download.warmuping.kejzn.com/Warmuping.apk

App main interface description

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>