OBAO OB16SE Intelligent Sweeping Robot Instruction Manual

June 15, 2024
OBAO

OBAO OB16SE Intelligent Sweeping Robot Instruction Manual

Product Certification

Product Name : Intelligent Sweeping Robot
Model Number :
Production Date :
Inspector : QC01

This product has been inspected to meet the stipulated quality standards and is granted to leave the factory.
QR code

Thanks for purchasing Intelligent Sweeping Robot! Hope you enjoy it.

Be careful! Battery leakage exudate can cause human injury If the battery leaks exudate, make sure it doesn’t come out to contact with the eyes or skin. In case of contact, wash hands and eyes with clean water immediately. If you still feel unwell, seek medical advice immediately.

CSormt ponent Hazardous Substance
Lead (Pb) and its compounds Mercury (Hg) and its compounds
its compounds Heavy (a Core(n VtI)C) heron durum its compounds
Polybromobiphenyl (PBB) Polybrominated Diphenyl Ether (PBDE)
Plastic Parts
Hardware ×
C Miraculin it EM no gidnuele ×
Celomic proton enacts
Battery
P(Luetta PloP wirer) Cord ×

Note: This form is compiled in accordance with SJ/T 11364. ○ :Indicate that the content of the hazardous substance in all homogeneous materials of the part is below the limit × specified in the current valid version of GB/T 26572. e in at least one of the materials of the part exceeds the limit r :Indicate that the content of the hazardous substances     26572, and there is no mature alternative solution in the requirement specified in the current valid version of GB/T industry, which meets the environmental requirements of the EU RoHS directive.

Product use/ APP download and connection

Phone APP operation steps:

  1. The mobile phone scans the QR code download and install the product APP
    connection
    Scan the QR code on the phone ‘s WeChat, Click on the upper right to open a browser
    Select the APP installation package of the same model according to the type of mobile phone

  2. Make sure that the power of the sweeping robot is sufficient. Master switch According to the “-” state.

  3. Open the APP to connect the sweeping robot.connection

Product Usage/Operation Procedure

  1. Bottom master switch According to the “-” state.
    connection

  2. Boot mode one: Press cleaning robot power switch start.
    connection

  3. Boot mode two: The key to operating the APP Start the sweeping robot.
    connection

  4. Open the flip panel

  5. Turn on the water filling plug

  6. Use the special bottle to add water(less than 100ml) lt is  strictly prohibited to use other bottles for water injection
    connection

  7. Mop Function: Paste Mopping Cloth on the bottom of the product.

  • Please don t use water tank modules on carpet.
    connection

    1. When the indicator light is blue and flashes , the product will stop working. The indicator light will be red when the product is charging, and will go out when the product is fully charged.
      connection

    2. Open the magnetic cover,
      Raise upward the dust box,
      Open the dust box to take out the garbage and reload the box for next use.
      connection

Product Parameter

Product Model|
---|---
Charge Time (h)| ≈3.5H
Product Dimensions| 3OOx3OOx78mm
Battery Capacity| 24OOmAh,17.8WH

  • Charging at a voltage above 5V is prohibited!
  • *Due to the need of continuous improvement of the products, the products in the manual are in kind. We reserve the right to update the products.

Phone APP function

Phone APP function

Product Composition/Packaging Contents

Serial Number Description Quantity
12 Main Engine (including Battery) 11
3 Brush 1
4 USB Cable 1
5 Operating Manual 1
Mopping Cloth
  • Main Engine (including Battery)

  • Brush

  • USB Cable
    USB Cable

  • Operating Manual

  • Mopping Cloth

Front view of machine

Front view of machine

Bottom view of machine

Bottom view of machine

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, macaques harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals