Dayun BM-32FXD031 3.2 Inch Color LCD Baby Monitor User Manual

Dayun BM-32FXD031 3.2 Inch Color LCD Baby Monitor

Product Information

Specifications

• Product Name: Baby Monitor
• Display: 3.2″ Color LCD
• Wall Mount Bracket: Optional
• FCC Compliance: Part 15

Product Usage Instructions

FCC Caution – Monitor
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. To ensure proper operation and minimize interference, follow these guidelines:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restriction.

FCC Warning – Camera
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including
   interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.

FAQ

• What is the FCC compliance for this product?
  This product complies with part 15 of the FCC Rules.

• How can I minimize interference with the monitor?
  To minimize interference, you can try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into a different circuit, or seeking help from a dealer or experienced radio/TV technician.

• Can this product cause harmful interference?
  No, this product is designed to not cause harmful interference. It must also accept any interference received.

• How should I install and operate the product to comply with FCC’s RF Exposure guidelines?
  To comply with FCC’s RF Exposure guidelines, you should install and operate the equipment with a minimum distance of 20cm between the radiator and your body. Additionally, use only the supplied antenna.

SAFETY INSTRUCTIONS

• Keep cord out of the reach of children (more than 3ft (0.9ml away) in case of STRANGULATION.
• NEVER place the camera ar cord in or near the crib or playpen.
• NEVER mount the camera directly above the crib or playpen to avoid the risk of injury.
• Only use the AC adopters provided.
• Never use the unit near water, including near a bathtub, sink, laundry machine tube, wet basement, etc.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat.
• Only use attachments and accessories specified by the manufacturer.
• Unplug this device when unused for long periods of time.

CAUTION

• NOT toys. Do not allow children to play with them.
• This product is NOT intended to replace the proper supervision of children. You MUST check your child’s activity regularly.
• This product is not intended for use as a medical camera and its use should not replace adult supervision.
• Unplug the product during lightning storms.
• Please check the operating range and condition of the camera carefully at the initial installation, and on a regular basis after that.
• Check the reception regularly. Test the camera before use and after changing the camera’s location.
• For indoor use only.
• Clean the camera with a dry cloth only.
• Do not block any ventilation openings.
• Microphone feedback might occur when the monitor is too close to the camera. Please keep them at least 1.5m /4.9ft apart.

PACKAGE CONTENTS

PRODUCT DIAGRAM

Baby Monitor

1. VOX shortcut key: Turn on or off the audible alarm function.

2. Power/Sleep Button: Long press to turn on/off the monitor; short press to turn on/off the screen.

3. Menu/Back Button: Press ****to enter menu page or press as a back key.

4. Camera switching: switching and cycling of multiple cameras.

5. Charging indicator: Solid blue during charging, and goes out when fully charged; Blinking red when the monitor is in a low power state.

6. Up Button: Press to A tilt the camera upward or to change your selection upward.

7. Left Button: Press > to pan the camera leftward or to change your selection leftward.

8. Right Button: Press < to pan the camera rightward or to change your selection rightward.

9. Confirm/Zoom Button: Press ****to Zoom in/out or to confirm your selection.

10. Down Button: Press v to tilt the camera downward or to change your selection downward.

11. Monitoring Status Indicator: Green. When the camera is disconnected, it flashes slowly; when the camera enters pairing mode, it flashes quickly;when the camera is turned on, it remains steady.

12. Way talk: Long press to talk with your baby.

13. Lullaby shortcut keys: Turning the lullaby on or off.

14. Sound Level LED: Low/high level shows low/high sound detected by the camera.

15. Microphone

16. Antenna

17. Power Input

18. Speaker

19. Support Stand

20. Night Vision Sensor

21. Camero Lens

22. LEDS

23. Microphone

24. Antenna

25. Speaker

26. Temperature Sensor

27. Pair Button

28. Power Input

29. Mounting Threaded Holes

30. Microphone

31. Night Vision Senso

32. Camera Lens

33. LEDS

34. Speaker

35. Temperature Sensor

36. Power Input

37. Pair Button

38. Bracket

GETTING STARTED

Charging & Powering Babyphone

1. Connect the monitor to a power source via the type-C cable and power adapter.
2. Unplug the unit when its power indicator turns off, indicating a full charge. Of course, if it stays plugged in, it will not affect the use, but it may affect the battery life.
3. Press the power button on the monitor to turn on the device. See green power indicator lighting.

Powering Camera

1. Connect the camera to a power source via the type-C cable and power adapter.
   • Only use the power adapters included in the package.
   • Do not place the camera and power cord within the reach of your baby.

Placing the Camera
For safety reasons and better vision in night vision mode, place the camera on a 0.75m table top and ensure the distance from the baby is at least 1.5m.

Placing the Camera
Note: The camera bracket is an optional accessory.

1. Rotate the knob in anticlockwise direction to adjust the wall mount bracket, then fasten the joint and secure the angle.
2. Mark the upper and lower holes with a pencil.
3. Drill holes in the wall (17/64 inch drill bit) and insert wall anchors into holes with a hammer.
4. Fasten the wall mount bracket with screws.
5. Place the camera on the wall mount bracket. Tighten the screw into the threaded socket at the bottom to secure the camera.
6. You can maximize your camera unit’s viewing angles by tilting the wall mount bracket. Tilt your camera up or down to adjust to your preferred angle.

Don’t release the camera until it is firmly mounted.

FUNCTIONS & OPERATIONS

Top Status Indications

Notification Icons

• You can open Live-Video-Loop function through short presses on the p button until you see O on the status bar.
• When Live-Video-Loop function is on, the connected cameras will automatically switch every 10 seconds. And if there is a sound / temperature alarm, the camera-switch function.

Volume Adjustment

• Explanation:
  This function is used to adjust the speaker volume of the monitor.
  Step 1:

1. Press ****to enter menu page.
2. Choose -> button-> Left/ Right button to decrease/ increase the volume, and press ****Button to save your settings.

Brightness Adjustment

• Explanation:
  This function is used to adjust the screen brightness of the monitor.
  Step 1:

  • Press ****to enter menu page.
  • Choose button-> Left/ Right button to decrease/ increase the Brightness, and press ****Button to save your settings.

Add Camera
This function is to adjust the monitor side system sound.

• Step 1:

1. Press ****to enter menu page.
2. Choose button.

• Step 2:

1. Select through button.

• Step 3:
  • Press PAIR button on the rear of the camera.
  • Then the monitor shows the camera is paired successfully. The monitor can connect up to 4 cameras at the same time.

Selecting and switching camera

• Explanation:
  This function requires more than two cameras to be turned on. Multiple cameras are powered on and within the monitor connection range.

1.  **Step 1:**
  1. Press ****to enter menu page.
  2. Choose button.
2.  **Step 2:**
  1. Select the camera you want to delete and press ****button.
3.  **Step 3:**
  1. If you need to cycle multiple camera views. Select button.

Delete a Camera

1. Step 1:
2. Press ****to enter menu page.
3. Choose button.
4. Step 2:
5. Select the camera you want to delete and press ****button.
6. Step 3:
7. Select YES. The camera is deleted successfully. The monitor is paired with one camera by default, you should keep at least one camera connected.

VOXmode

• Explanation:

1. There are three options of sound detection, LOW (78dB), MEDIUM (65dB) and HIGH (60dB). LOW means the sound can be detected if it reached 78dB  and so on for MEDIUM and HIGH.
2. Setting” off “turns off the alarm sound in VOX mode.
  *  **Step 1:**
    1. Press ****to enter menu page.
    2. Choose **VOX- > ** button.
  *  **Step 2:**
    1. Select the option you want. Press ****button.

After setting the VOX wake-up level on this page, press the VOX button to quickly turn on/off the VOX function. A VOX alarm can be temporarily turned off by pressing any button on the monitor.

Alarm Clock

• Explanation:
  This function is to remind you of feeding your baby. OFF means you turn off the function; 2 hours mean it reminds you every 2 hours and so on for the other options.

  • Step 1:
  1. Press ****to enter menu page.
  2. Choose button.
  • Step 2:
  1. Select the time you want. Select OFF to turn off the feeding reminder.

Lullabies

• Explanation:
  This function is to comfort baby with soothing lullabies.

  • Step 1:
  1. Press ****to enter menu page.
  2. Choose button.
  • Step 2:
  1. Select your desired lullaby and press ****to turn it on/off. Press left/right button to decrease or increase the lullaby sound. Select to play the lullaby on a loop.
  2. After setting the lullaby playback track under this function page, open the lullaby button to quickly turn on / off the camera lullaby.

Temperature

• Explanation:
  you can set the maximum/minimum temperature and turn on the temperature alert, so that the baby monitor beeps whenever the room temperature falls outside the desired temperature range. You can also choose to display the temperature in Fahrenheit (° F) or Celsius (°C) on your monitor.

1.  **Step 1:**
  1. Press ****to enter menu page.
  2. Choose button.
2.  **Step 2:**  

Press < & > key to make settings, and press the key to return and automatically save the settings.

A temperature alarm can be temporarily turned off by pressing any button on the monitor.

Screen Sleep

• Explanation:
  This function is to set the monitor screen to sleep without powering off the monitor.

  • Step 1:
  1. Press ****to enter menu page.
  2. Choose button.

  • Step 2:
    Press ( & ) to select the desired time or turn off the rest screen function, and press the ****key to return and automatically save the settings.

  • The screen will automatically light up if there is a VOX or a temperature alert.

  • When VOX is turned off, the screen will not automati­cally wake up and light up.

  • When the sleep time is set to” OFF “, the monitor will not be off the screen.

Alarm Volume

• Explanation:
  This function is to adjust the monitor system sound.

  • Step 1:
  1. Press ****to enter menu page.
  2. Choose button.
  • Step 2:
  1. Select the preferred alarm sound level. Press ****button.

Factory Settings

• Explanation:
  System will be restored to default Settings.

  • Step 1:
  1. Press ****to enter menu page.
  2. Choose button.
  • Step 2:
  1. Choose YES- > button to start restoring factory settings.

TROUBLESHOOTING

WARRANTY & CUSTOMER SERVICE

12 months guarantee (contact information can be found on the monitor or on the cover of this user manual)

FCC Caution (Monitor)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful in terference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.The device has been evaluated to meet general RF exposure requirement.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

FCC WARNING (Camera)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in are sidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to incommunicado cations. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception,which can be determined by turning the augmentation off and on. the user is encouraged to try to correct the interference by one or more of the follow in a measures’:

• Reorient or relocate the receiving antenna.– Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

WEEE COMPLIANCE
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS ” = “The symbol indicates DC voltage This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19 /E U in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>