EQP324 Big Mouth Max Release Foam Cannon

Product Information

Specifications

• Expertise Level: Beginner
• Prep Required: None
• Additional Items Needed: Pressure Washer, Microfiber Towels, 2
  Buckets, Wash Mitt or Sponge, Dirt Trap, After Wash

Product Usage Instructions

Step 1: Gather the necessary items

Before starting, make sure you have the following items
ready:

• Pressure Washer
• Microfiber Towels
• 2 Buckets
• Wash Mitt or Sponge
• Dirt Trap
• After Wash

Step 2: Prepare the pressure washer

Ensure that your pressure washer is in good working condition.
Check the water supply and make sure the nozzle is properly
attached.

Step 3: Fill the buckets

Fill one bucket with clean water and another with a mixture of
water and the recommended car wash soap or shampoo. Follow the
manufacturer’s instructions for the appropriate soap-to-water
ratio.

Step 4: Rinse the vehicle

Using the pressure washer, rinse the entire vehicle to remove
loose dirt and debris. Start from the top and work your way down,
ensuring that all surfaces are thoroughly wet.

Step 5: Wash the vehicle

Dip the wash mitt or sponge into the soapy water bucket and
gently scrub the vehicle’s surfaces. Start from the top and work
your way down, using a back-and-forth motion. Rinse the mitt or
sponge frequently in the clean water bucket to remove dirt and
prevent scratching.

Step 6: Use a dirt trap

Place a dirt trap in the bottom of one of the buckets to prevent
dirt and debris from being transferred back onto the vehicle. This
will help maintain a clean wash solution.

Step 7: Rinse off the soap

Once you have washed the entire vehicle, use the pressure washer
to rinse off all the soap. Start from the top and work your way
down, ensuring that all soap residue is removed.

Step 8: Dry the vehicle

Using the microfiber towels, gently dry the vehicle’s surfaces.
Start from the top and work your way down, ensuring that all areas
are thoroughly dried. This will help prevent water spots and
streaks.

Step 9: Apply after wash

After drying, apply the recommended after wash product to
enhance shine and provide additional protection to the vehicle’s
surfaces. Follow the manufacturer’s instructions for
application.

FAQ (Frequently Asked Questions)

Q: Can I use a regular towel instead of microfiber towels?

A: It is recommended to use microfiber towels as they are more
effective at trapping dirt and are less likely to scratch the
vehicle’s surfaces. However, if you don’t have microfiber towels,
you can use a clean, soft towel.

Q: How often should I wash my vehicle?

A: The frequency of washing depends on various factors such as
weather conditions, driving conditions, and personal preference. As
a general guideline, it is recommended to wash your vehicle every
2-4 weeks to maintain its appearance and protect the paint.

Q: Can I use any pressure washer?

A: It is important to use a pressure washer that is suitable for
automotive use. Ensure that the pressure washer has an adjustable
nozzle and a low-pressure setting to avoid damaging the vehicle’s
paint or trim.

Instructions For Use
· Unscrew fluid tank from foam cannon unit and fill fluid tank with warm water · Add 1-3 ounces of car wash soap, then attach fluid tank to foam cannon unit · Rinse car with water to remove loose debris and grime · Reattach foam cannon to pressure washer wand via the quick release nozzle. · Cover car with thick car wash foam · Proceed with 2-bucket car wash method, then rinse and dry car Time: 20 ­ 40 Minutes
Expertise: Beginner
Prep: None
What Else You’ll Need: Pressure Washer, Microfiber Towels, 2 Buckets, Wash Mitt or Sponge, Dirt Trap, After Wash

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>