CHEMICAL GUYS ProFlow PM2000 Performance Electric Pressure Washer User Manual
- June 9, 2024
- CHEMICAL GUYS
Table of Contents
CHEMICAL GUYS ProFlow PM2000 Performance Electric Pressure Washer
How To Set Up
- Choose between Locking Casters for mobility or rubber foot pad for stationary use.
- Attach standard garden hose to Brass Quick Connect coupled to Ultra Clear Translucent Water Filter, threaded onto backside of ProFlow PM2000.
- Use Standard or Compact Pressure Washer Barrel Length
- Attach 20 ft long High Pressure Hose to water outlet on frontside of ProFlow.
- Connect Pressure Washer Gun to Rubber Hose using quick connect on underside of gun.
- Run water source through unit to bleed off trapped air.
- Connect ProFlow PM2000 to electrical outlet.
- Turn ON machine.
How To Use
- Insert desired (0-60) degree spray tip for job, pull back on brass sleeve quick connect, and lock securely.
- Spray object using a minimum distance of 12 to 18 inches.
How To Use With Foam Cannon:
- Connect Foam Cannon* onto Pressure Washer Gun Barrel (Compact or Long) using 1/4″ Brass Quick Connect.
How To Use With Snubby:
- Thread included adapter onto bottom of TORQ Snubby Attachment to mate to 20 ft Rubber Hose.
- Pull back plastic sleeve/ring and insert 20 ft Rubber Hose and lock securely.
- *adapter may be needed if you are not using a TORQ foam cannon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>