BenchK DB1 Wall Bars System 732B Instructions

Table of Contents

Specifications

Assembly

Ensure you have all the necessary screws and components listed in the “Warehouse Operative Quantity” section.
Start by attaching the two M10 x 70 screws to the designated holes on the bench.
Attach one M6 x 60 screw to each of the four corners of the bench.
Attach one M6 x 25 screw to each of the eight remaining holes on the bench.
Secure the bench legs using the provided M10 screws.

Usage
To use the BenchK DB1

Place the bench on a flat and stable surface.
Ensure that the weight does not exceed the maximum weight capacity of 150 KG.
Sit or lie down on the bench, making sure to maintain proper form and balance.
Use the bench for various exercises such as bench presses, dumbbell workouts, or abdominal exercises
Always follow proper safety guidelines and consult a professional trainer if needed.

FAQ (Frequently Asked Questions)

Q: What is the maximum weight capacity of the BenchK DB1?
A: The maximum weight capacity of the BenchK DB1 is 150 KG.
Q: Where is the BenchK DB1 manufactured?
A: The BenchK DB1 is manufactured in Poland.
Q: How can I contact the manufacturer or distributor for support?
A: You can contact the manufacturer, BenchK LLC, at the following details
- Producer: POLAND
- Tel.: +48 536 560 089
- Tel.: +48 575 188 088
- Email: [email protected]
- Website: www.BenchK.com
- You can also contact the distributor, BenchK LLC, at the following datils
- 1013 Ohio Ave, Palm Harbor Florida 34683
- EIN: 36-5017984
- USA
- Tel.: +1 833 998 7727
- Email: [email protected]
- Website: www.BenchK.us

Safety Precautions

Only one person at a time can exercise on the BenchK DB1.
Before cach use, check the technical condition of BenchK DB1
fasteners and other Clements.
Attach the product to BenchK ladders only.
BenchK DB1 is not suitable for use by children under the age of 3.
Children and adolescents from 3 to 14 years of age may use the device under the supervision of an adult.
The maximum user weight of the BenchK DBI is 150 kg.
Make sure there is enough space around the wall bars for safe exercise.
To minimize the risk of injury, use an exercise mattress or mat.
For maintenance wipe BenchK DB1 with a dry or slightly damp cloth.
In the event of disassembly, store the BenchK DB1 in a dry room with low air humidity.
The level of difficulty and intensity of exercise should be selected depending on the health and condition of the person exercising. Avoid strenuous exercise.

Manufacturer’s warranty

The manufacturer guarantees the product for 10 years for metal Clements and 24 months for other elements, from the date of purchase, provided that the installation and operation regulation are complied with.
In the event of any mechanical damage during transport, assembly or operation of the BenchK DB1 by the Buyer, the Seller shall not be liable.
In the event of finding defects or low-quality components, not attributable to the Buyer, please contact the Benchmark customer service office ([email protected]).
Comments Due to the continuous work on the improvement of the BenchK DB1, small changes in the design are possible, but not reducing the quality. The product meets the safety requirements of PN-EN 12346
- 2001, PN-EN 913
- 2019-03.

Producer

Benchmark Ltd NIP: 8133702082,
REGON: 360978103 35-10315
POLAND
- tel. : +48 536 560 089
- tel.: +48 575 188 088
- e-mail: [email protected]
- www.BenchK.com

Distributor

BenchK LLC 1013 Ohio Ave,
Palm Harbor Florida 34683
- EIN: 36-5017984 USA
- tel.: +1 833 998 7727
- e-mail: [email protected]
- www.BenchK.us

Follow us on: