d-DAO CK003 Smart Window Camera User Manual
- May 15, 2024
- d-DAO
Table of Contents
EOJO Smart Window Camera
Quick Start Guide
What’s in the box
Know your camera
Download EOJO App
Scan QR code below and download EOJO app.
http://eojo.cloud:23460/eojo-dl-apple
http://eojo.cloud:23460/eojo-dl-android
Sign up EOJO App
Launch the EOJO app, and register the user profile with a new E-mail and password.
Add EOJO Camera to EOJO App
Plug the EOJO camera to power (the back indicator light should flash blue) and
wait for the voice prompt to initiate the pairing sequence.| Click the “ ”
icon on the upper right corner of the EOJO App to add an EOJO camera.
---|---
Pairing the EOJO Camera
To start : Scan the device’s QR code
Click “Scan code to pair” on the EOJO APP screen.
Scan the QR code on the side of the EOJO camera body to start the pairing process.
Method one:
Select ‘Bluetooth Pairing’ from the “Select a pairing method” interface.
Select “EOJO Camera” from the Bluetooth list.
Select the device EOJO Camera to pair on your cell phone. After linking to
the EOJO device Bluetooth, return to the EOJO APP to complete device pairing.
After success, proceed to the installation guide on page 16.
Method two: Pairing the device with build-in Hotspot
Click “[-]” on the top right of the EOJO App, select “Pairing By Device AP
Hotspot”. Or select “Pairing by device AP hotspot” from the “Select a pairing
method” interface.
Activate device with build-in Hotspot
Click “To Connect” on the “Connect Device Wi-Fi” page.
Select EOJO Camera from your Wi-Fi list to add After linking to the EOJO device Wi-Fi, return to the EOJO App to complete device pairing. After success, proceed to the installation guide on page 16.
Method three: Manual “Wi-Fi” pairing method
Select ‘Wi-Fi Device’ to pair on the “Select the device type” dashboard.
Input Wi-Fi Name And Password
Fill in your WIFI name and password in the EOJO App and click “Next”.
Scan the QR code with EOJO Camera lens
Install the Camera on the Window (Prep)
Install the Camera on the Window (Complete)
Press the camera against the window and don’t release the
pressure for about 20 seconds for full bond force.
Remove EOJO Camera from the window
In case of camera reinstallation and relocation, peel the camera off the magic tape
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receivingantenna.
- Increase the separation between the equipment andreceiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
ISED Statement
English:This device contains licence ‐exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development Canada’s licence
‐exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES ‐3 (B)/NMB ‐3(B).
This device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Thank you for purchasing the EOJO Smart Window Camera
Please visit our website for further guidance and
FAQ if you have pairing and installation
questions.
*Terms of service on www.EOJO.cloud