HYDRAGUN HeatPulse Knee Massager User Manual

June 15, 2024
HYDRAGUN

HYDRAGUN HeatPulse Knee Massager

HYDRAGUN-HeatPulse-Knee-Massager-product

In the box, you’ll find:

HYDRAGUN-HeatPulse-Knee-Massager-fig- \(1\)

  • HeatPulse Knee Massager (comprising custom-fit sleeve and detachable control pod)
  • Manual
  • Extension strap (for using the HeatPulse on the shoulders)
  • USB-C charging cable

Specifications

Sleeve

  • 360° Silkro™ fabric Breathable, moisture-wicking polyester mesh lining
  • Top strap: 51cm (20″)
  • Bottom strap: 48cm (19″)
  • Extension strap: 58cm (23″)

Control pod

  • Battery capacity: 1600mAh 7W 5V
  • Battery life: 60-90 minutes

Getting started

  1. Find your fit
    Strap the sleeve around your knee. It should fit snugly—not too loose or too tight.

  2. Attach the control pod
    Attach the magnetic control pod to the sleeve. The control pod may be attached the right side up or upside down. If an “E2” error message appears on the display, the control pod is not properly attached to the sleeve. Simply remove the control pod and reattach it securely to the magnetic pad to restart .HYDRAGUN-HeatPulse-Knee-Massager-fig- \(5\)

  3. Turn on the control pod
    Press and hold the power button for three seconds. This will activate the HeatLast™ infrared graphene heating band which will start to warm to 40°C (104°F)

  4. Select your temperature
    Push the + button to gradually increase the temperature until it is right for you. Try each of the five temperature settings for a few seconds to determine if it’s right for you.HYDRAGUN-HeatPulse-Knee-Massager-fig-
\(6\)

  5. Select your massage speed
    If you wish to turn on the HeatPulse’s massage function, press and hold the M button for three seconds. Push the M button again to cycle through the three speed settings until you find the one that’s right for you.

    • Blue light on M button Speed 1
    • Green light on M button Speed 2
    • White light on M button Speed 3
      (Flashing red light on M button indicates low battery.)
  6. Lock in your settings
    If desired, press and hold the M button for two seconds to lock in your current settings. The M button will turn red when the screen is locked. Press and hold the M button for another two seconds to unlock.

  7. Enjoy a full treatment session, or turn off your device
    Once you’ve selected your settings, sit back and let the HeatPulse work its magic. One full treatment session lasts for 30 minutes, after which the HeatPulse will shut off automatically. (To end your treatment mid-session, press and hold the power button for three seconds.) Repeat the treatment session on the other knee if desired. The HeatPulse can provide at least two 30-minute sessions on a full charge.HYDRAGUN-HeatPulse-Knee-Massager-fig-
\(11\)

Charging your HeatPulse

To charge, turn off the control pod and connect your USB-C charging cable to the control pod. The pod can be charged while it is either attached to or detached from the sleeve.

HYDRAGUN-HeatPulse-Knee-Massager-fig- \(12\)

  1. Low battery
    M button will display a flashing red light and device will beep three times

  2. Charging
    button will display a flashing green light

  3. Fully charged
    button will display a green light

  • The recommended charging time is two to three hours for a full charge. Frequent overcharging may deteriorate battery performance and lifespan.
  • Do not operate the HeatPulse while it is charging.

Caring for your HeatPulse

It is not recommended to deplete the battery before charging. Charge it at any level and stop once it is fully charged.

  • Control pod
    Wipe down with a slightly damp or dry cloth. Make sure the pod is completely dry before attaching it to the sleeve and turning it on.

  • Sleeve
    Wipe down with a slightly damp cloth or sanitize with alcohol sprays or wipes. Do not soak, wash, or submerge in water. Air dry after cleaning and make sure the sleeve is completely dry before attaching the pod and turning it on.

When to use your HeatPulse

The HeatPulse is designed for:

  • Knee arthritis
    • Relieve chronic knee stiffness and pain
    • Improve blood flow to ease age-related joint tension and increase flexibility
  • Knee injuries and post-surgery recovery
    • Speed up healing of acute knee pain
    • Heal damaged tissues by increasing blood flow in the knee, delivering more oxygen and nutrients to the damaged ligaments
  • High-impact sports
    • Speed up post-exercise recovery
    • Manage overexertion of knee joints after high-impact activity

To maintain the health of your knee joint, boost recovery and keep pain away, use the HeatPulse Knee Massager once or twice daily on both knees (one cycle of 30 minutes per knee at a time). For best results, do not stand up or walk around while the HeatPulse is operating. Remain seated or inclined with your knee slightly bent to align with the shape of the sleeve. The HeatPulse is not a compression sleeve or knee brace.

Additional uses:

  • On elbows Strap the HeatPulse onto your elbows, ensuring that it is snug but not too tight.
  • On shoulders  The HeatPulse comes with an extension strap to secure it around the torso while it is being used on the shoulders. Simply attach the extension to the top strap and wrap it around the torso under the armpit to secure the HeatPulse. Secure the bottom strap around your tricep and operate as usual.

Safety first

  1. If you feel pain or extreme discomfort, or notice any skin issues or irritation around your knee while using the HeatPulse, stop using it immediately and consult your physician.
  2. You may notice slight redness on the knee area while using the HeatPulse. This is due to increased blood circulation to the skin from the heat and vibration, and should not be a concern. However, if symptoms persist without relief, consult your physician.
  3. Do not use the HeatPulse excessively. We recommend using it once or twice daily (one cycle of 30 minutes per knee at a time).
  4. Do not use the HeatPulse over thin fabrics like stockings. For best results, use it directly on the knee and not over other fabrics.
  5. Keep away from children and infants to avoid injury from improper use.
  6. Do not use the HeatPulse in the bathroom or shower.
  7. Do not use while sleeping.
  8. Do not use while under quilts or blankets as this may cause overheating.
  9. Do not place heavy items or load on the HeatPulse as this may damage the components.
  10. Do not leave the components exposed to direct sunlight as they may overheat and damage the electronics in the pod and sleeve.
  11. Do not disassemble the pod or the sleeve or throw them into fire. This may cause damage to the product and the lithium battery.

Consult your physician before using the HeatPulse if any of the following applies to you:

  • Nerve disorders in the leg
  • Skin sensory disorders
  • Loss of sense of temperature
  • Sensory impairments caused by diabetes
  • Heat sensitivity
  • Leg or knee sequelae due to traffic accidents, etc.
  • Leg disease (tendon injuries, arthritic deformities, fractures, varicose veins, etc.)
  • Implanted medical electronic devices that are susceptible to electromagnetic failures such as pacemakers
  • Metals, plastic or silicon injectedinto the knee from surgery
  • Malignant tumors
  • Heart disease
  • Osteoporosis
  • Fractures, sprains, or other acute injuries
  • Symptoms such as acute inflammation, fatigue, chills, and blood pressure fluctuations
  • Early stages of pregnancy or recently given birth

Take your HeatPulse  experience to the next level

Round out your recovery routine—use the HeatPulse Knee Massager with these complementary products:

The Thermosleeve

  • A 360° Hot/Cold Compression Sleeve that uses Hot or Cold Therapy combined with Compression Therapy to help relieve pain instantly. The Thermosleeve is fuss-free and mess-free. Simply take it out of the freezer or pop it into the microwave for one minute and slip it on.

Try hot and cold contrast therapy for comprehensive knee pain relief:

  • Use the Thermosleeve straight out of the freezer for cool relief of acute swelling or pain, and to reduce inflammation
  • Use the HeatPulse to relax muscles and relieve joint stiffness, soreness, and pain

The Hydragun

  • Named “The Quietest Massage Gun” by Forbes, GQ, TechRadar and many more, the Hydragun uses percussive therapy to knead away tight knots and aches on targeted muscles.

Try the Hydragun for whole-body relief and relaxation:

  1. Use the HeatPulse on the knees and other joints
  2. Use the Hydragun on all major muscle groups, including the neck, shoulders, chest, back, glutes and thighs

CONTACT INFORMATION

FREQUENTLY ASKED QUESTIONS

In what color is the HYDRAGUN HeatPulse Knee Massager available?

The Knee Massager is available in Dark Gray.

What are the product dimensions of the HYDRAGUN HeatPulse Knee Massager?

The product dimensions are 11 x 8 x 2 inches.

What is the unit count in the HYDRAGUN HeatPulse Knee Massager package?

The unit count is 1.00.

What is the weight of the HYDRAGUN HeatPulse Knee Massager?

The weight is 2.25 pounds.

What is the model number of the HeatPulse Knee Massager by HYDRAGUN?

The model number is HEATPULSE.

What special feature does the HYDRAGUN HeatPulse Knee Massager offer?

The special feature is Heat, providing gentle, steady warmth to the knee joint.

Who is the HeatPulse Knee Massager designed for, and what condition does it aim to relieve?

The Knee Massager is designed for individuals with knee arthritis, aiming to relieve chronic knee stiffness and pain.

How does the HeatPulse Knee Massager aid in post-surgery recovery and knee injuries?

It improves blood flow to ease age-related joint tension, increases flexibility, and accelerates healing of acute knee pain.

Who can benefit from the HYDRAGUN HeatPulse Knee Massager, and how does it assist athletes and active individuals?

Athletes and active individuals can benefit by using it to speed up post- exercise recovery and manage overexertion of knee joints after high-impact activity.

What technology does the HeatPulse Knee Massager use for providing warmth, and how many heat levels are available?

The Knee Massager uses HeatLast infrared graphene technology, and users can choose from five levels of heat, ranging from 40-60℃ (104-140°F).

How does the Pulse Vibration feature of the HYDRAGUN HeatPulse Knee Massager stimulate blood circulation?

The dual vibrating cores hug both sides of the knee, providing targeted 80-100Hz pulses to the patella, stimulating blood circulation and offering lasting pain relief from tightness, soreness, and pain.

How many speeds are available for the Pulse Vibration on the HYDRAGUN HeatPulse Knee Massager, and what is the frequency range?

Users can choose from three speeds for different massage intensities, with a frequency range of 80-100Hz.

What benefits does the HYDRAGUN HeatPulse Knee Massager offer in terms of oxygen and nutrient delivery to damaged ligaments?

It helps heal damaged tissues by increasing blood flow to the knee, delivering more oxygen and nutrients to the damaged ligaments.

What type of batteries are required for the HYDRAGUN HeatPulse Knee Massager, and how many are needed?

The Knee Massager requires 1 Lithium Polymer battery (included).

Can the HYDRAGUN HeatPulse Knee Massager be used internationally, and what precaution should users take regarding electrical compatibility?

The product is designed for use in the US, and users should check compatibility before purchasing, considering differences in outlets and voltage internationally.

What is the warranty period for the HYDRAGUN HeatPulse Knee Massager?

The warranty information is not provided in the data. It's recommended to check the product documentation or contact HYDRAGUN for warranty details.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:HYDRAGUN HeatPulse Knee Massager User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals