Owaylon HD-08 Portable Blender User Manual

Owaylon HD-08 Portable Blender

Blender Operation

One click to check the battery level; Double click to start – Click again to stop.

Important Tips for the First Use

1. Before use, please make sure the blender battery is fully charged.
2. Please pour some pure water into the cup and then turn on the machine to clean the cup.
3. Cut the fruit into 1.5cm*1.5cm size particles and pour them into a cup, then pour some milk or water. Invert or tilt the machine 45 degrees, then double click to turn on the power, and then put the machine back upright and start making juice.
4. When the fruit particles are too big to stir, please restart the machine, and you can also shake the machine when it’s stirring which will make the juice finer.
5. Before making another taste of the juice, please wash the cup first. Just put some pure water into the cup, and turn it on to wash the cup.

Important Tips for Blender Batteries

1. Click the power button to check the remaining battery power to ensure sufficient power for each use.
2. 2. Please charge first if it is stored for a long time.
3. If the battery is stored for more than a month, it may be damaged due to battery depletion.
4. The power consumption in the fully charged state last for 6 months, please charge regularly if it is stored for a long time.

Easy Blender Use in Just Six Steps

• Step 1: First add 60% water first. Note that if you squeeze smoothies, the ratio of ice to water is 1: 1
  

• Step 2: Put in the cut fruits 20% (try to keep the size of the cut fruits at 1.5*1.5cm to prevent jams)
  

• Step 3: Tighten the cover, the arrow is aligned with the circular mark below before blend
  

• Step 4: Turn the cup upside down or tilt 45 degrees to separate the fruit from the blade, double-click the switch to start normally, then put the cup upright

• Step 5: After placing the cup upright, it is best to shake the cup left and right to fully mix the ingredients

• Step 6: After 40 seconds, you can enjoy delicious juice

LED Indication

1. Charging: the blue light breathes according to the current battery level
2. 75%-100% power: 4 blue lights on
3. 50%-74% power: 3 blue lights on
4. 25%-49% power: 2 blue lights on
5. 1%-24% power: 1 blue light on
6. Working with only one grid power remaining: the blue light is off, and the red light flashes slowly
7. Battery low voltage protection (low battery alarm): the blue light off, red light on for 6s
8. Normal work: blue light flashes back and forth
9. Motor deadlock(If the fruit particles are too large): the blue light is off, red light flashes quickly for 5s
10. When do the red and blue lights flash alternatively for 2s:
11. Smart Magnet Induction detects a magnet
12. Smart Magnet Induction detects magnet removal
13. Smart Magnet Induction doesn’t detect magnet during startup
14. After working for 40s: the red and blue lights flash together for 3s

Magnetic Suction Charging

The working principle of this machine is to drive a DC motor with a battery. Multiple smartphone chargers can be used as chargers for this product. Before use, please use the magnetic suction cable we provide to charge the machine. Charge appropriately for approximately 2-3 hours until all four blue indicator lights remain on to fully charge.

Matters Needing Attention

1. When the machine is working, it is prohibited to open the lid above or put hands and other hard objects into the cup.
2. The accessories of this machine cannot be disinfected with a microwave or hot water above 50℃, otherwise, the accessories will deform.
3. Do not put machine accessories into the dishwasher for cleaning.
4. Please keep this product out of the reach of children. Do not allow the disabled or mentally ill to use or play with this product.
5. This product is for juicing only and is not suitable for mixing with meat or other nuts or legumes.
6. This product is applied only to individuals or families. If a malfunction occurred, please contact customer service. Do not repair or disassemble by yourself, or you will lose the warranty service rights.

Two Common Work Stoppage Situations

1. If the machine automatically stops, the red light slowly flashes (low battery alarm). Please click on the switch to check the battery level and ensure that the machine has sufficient power. Please do not stir under excessive viscosity to prevent electronic components from being overloaded and causing the machine to overheat and lose its function.
2. If the machine suddenly stops due to the large size of the fruit, the red light flashes quickly for 5s. Please take out the fruit and cut them into small pieces of 1.5cm * 1.5cm.

 Cleaning and Maintenance

1. Make sure the switch is turned off and the blades stop running before cleaning.
2. Please wipe the machine base with a damp cloth. the interior of the cup body can be quickly cleaned with water, after cleaning, please dry in time.
3. It is prohibited to use steel balls or cleaning agents with abrasive or corrosive properties to clean machine parts.
4. Do not immerse the machine base in water, otherwise, the machine base may lose function or catch fire.
5. When storing, please ensure that the product is clean, dry, and placed in a dry and ventilated place without sunlight.

Malfunction Analysis and Troubleshooting

large fruit and restart
Water Leakage| The cup is not tightened| Check if the cup is installed reversed or not tightened
The cup is not leaking or reversed, but the red blue lights flash for 2s after starting| No magnets detected| Tighten and make sure the arrow of the cup is aligned with the center of the circle below

Parameters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>