SANODESK QS1B-1160 Electric Standing Desk User Manual
- June 15, 2024
- SANODESK
Table of Contents
Item No. QS1B-1160/QS1M-1160
User Manual
Assembly Notes
Assemble on carpet to prevent scratches Phillips screwdriver or drill required (not provided) Cooperative assembly
Product List
Accessory Package
Note: The following line drawings are for reference only and in some
cases may be different from the actual part; please refer to the actual part.
If you find missing parts or have installation problems, please contact
customer service.
Parts Included
Assembly Steps
Make sure the Front labels are in the same direction.|
---|---
|
Please make sure the table legs are vertical to the connecting
rod . And then tighten all the screws.|
|
|
After the table is installed,please press the key to start
The table will automatically drop to the lowest point, stay for 3 seconds,then
rise to the highest point, and finally return to the initial position
– successful installation
Keypad User Guide
UP and down buttn operation
When the ” ” button is pressed, the desktop runs up until reaching the highest
height.
When the ” button is pressed, the desktop runs down until it reaches the
lowest height.
When press the “ ” or “ ” button, the desktop runs automatically.
When press the ” “button 3S after the display on the screen, release the
button, automatically reach the highest height, press any button can stop
halfway.
When press the ” “button 3S after the display on the screen, release the
button, automatically reach the lowest height, press any height can stop
halfway.
Location Store/ Memory Location operation
Storage of standing position: press and hold
”
” button for 5 seconds, the display on the screen ” “and the standing position
is saved.
Storage of sitting position: press and hold ” ” button for 5 seconds, the
display on the screen, and the sitting position is saved.
Stand memory position operation: press the ” ” button, the desktop
automatically run to the
height of the memory position, and press any buton can stop halfway.
Sitting memory position operation: press the ” ” button, the desktop
automatically run to the height of the memory position, and press any button
can stop halfway.
Reset Operation
Press and hold ” ” for 3 seconds, then release the button to enter reset mode.
The desktop automatically down to find the lowest height, then after a
3-second pause, the desktop automatically moves up to find the highest height,
pause for another 3 seconds. In the end, the desktop will automatically run
down to the fixed position,and the reset process is over.
After the Installation of desk, pls execute this process first.
Attention ****
-
Power supply: AC100V – 240V, frequency 50/60HZ;
-
Working environment: 14° – 104° F;
-
Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position.
-
Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on.
They should be disposed in accordance with the local laws and regulations. They cannot be disposed as household waste. -
Before using the product, please make sure the product has been installed correctly.
-
Before starting use of the product, please read the instructions to fully understand all the product’s functions and settings.
-
Keep children away from electric height-adjustable desks, control units and handsets.
Manufacturer is not responsible of any damages that result from children’s unpredictable behaviour. -
Slight noise caused by the multi wedge belt or brake system will not impact the use of this product.
-
Do not use corrosive or abrasive materials to clean this product and please dispose of cleaning solutions in an environmentally friendly manner.
-
Understand the risks associated with using this product. Children or those with cognitive impairment should not use this product without supervision.
-
If the power supply cord is damaged or broken, it must be replaced by the manufacturer or a relevant specialist to avoid any injuries.
-
Please operate in a clean and safe environment. For example, do not left around your tools. And always be careful to deal with packaging materials, in order to avoid any kinds of possible danger.
Potential chocking risk exists when children play with plastic bags! -
If necessary, retain the original package for future transportation.
Recycling and Disposal
This product cannot be disposed of as household waste. To prevent damage to the environment, this product should be recycled. Please use the relevant recycling systems available to you or contract the distributor or manufacturer for recycling assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>