REMOOTIO OC1 4.0MP Wireless IP Camera User Guide

: June 15, 2024
: REMOOTIO

Table of Contents

REMOOTIO OC1 4.0MP Wireless IP Camera
Product Information
Package Contents
Annotated Visual Guide
LED Indicator
Prerequisites
Setup
Safety Tips
Troubleshooting
Product Performance
FCC STATEMENT
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

REMOOTIO OC1 4.0MP Wireless IP Camera

Product Information

Specifications

FCC Compliance: Part 15 of FCC Rules
Operating Conditions: Uncontrolled environment
Minimum Distance: 20cm between the radiator and your body

FAQ

Q: What should I do if I want to make changes or modifications to the equipment?
- A: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. It is recommended to consult the manufacturer or an authorized technician before making any changes.
Q: Can this device cause harmful interference?
- A: No, this device complies with part 15 of the FCC Rules and is designed not to cause harmful interference.
Q: How should I connect the receiver?
- A: It is advised to consult the dealer or an experienced radio/TV technician for assistance in connecting the receiver properly.
Q: What are the radiation exposure limits for this equipment?
- A: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. It is recommended to maintain a minimum distance of 20cm between the radiator and your body for safe operation.

Package Contents

Annotated Visual Guide

Warning: The cords in this product are o potential strangulation hazard. Please keep these cords out of the reach of children.

LED Indicator

Status LED indicator Table

Prerequisites

Prerequisites 1

Download the Remootio app

To ensure a smoother video experience on your smartphone, it is recommended that your smartphone meets the following specifications:

iOS: version 11 or higher.
Android: 5.0 or higher, using a device with of Graphics Processing Unit (GPU).

Note: For the best experience, please use the latest version of the Remootio app.

Prerequisites 2

Have at least one Remootio smart gate or garage door opener added in the Remootio app

Make sure you have a Remootio smart gate and garage door opener set up in the Remootio opp before you start the installation of the camera.
During the camera setup process you have to be able to connect to your Remootio smart gate opener from the Remootio app.

Prerequisites 3

Smartphone connected to the some Wi-Fi network QS the camera

Make sure your smartphone is connected to the same Wi-Fi network as you would like to connect the camera to.
Tips: The camera supports dual-band 2.4GHz and 5GHz Wi-Fi networks, so you can choose the channel with the stronger signal to use. For example, choose your SSID: XXXXX_2.4G or XXXXX_5G.

Prerequisites 4

Remootio OC1 camero powered on

Plug the power adapter into the camera, and wait until you hear “Ready for Wi-Fi setup”.
Only use the original 12V IA power adopter supplied with the camera. Another power source may only be used if you made sure that the technical parameters of the power adapter you are about to use are the same as the original power adapter. (12VDC, IA, center positive borreljock)

Prerequisites 5

OC1 Camero is in factory state

Make sure the camera is in factory state.
If it’s a new camera, you can skip this step.
If it’s not a new camera (for example if it has been set up previously) then please reset it first by pressing the reset button for a few seconds.

Setup

Step 1: Navigate to settings

Tap on the cogwheel icon in the bottom right corner of the cord corresponding to the gate that you would like to add the camera to.

Step 2: Select camera from settings

Select the Camera option from the settings menu.

Step 3: Select the type of camera

Select the image thot looks like the OC1 camera and press the “Next” button.

Step 4: Check if the blue LED is blinking and scan the QR code on the camera

Check if the blue LED on the camera is blinking.
The camera is ready for setup when the blue LED is blinking at a rate of 2 flashes per second.

Step 5: Enter the Wi-Fi credentials

Enter your Wi-Fi credentials (Wi-Fi SSID and Password). Make sure that your smartphone is connected to the same Wi-Fi network.
Tap on the “Get configuration OR code” button and scan the QR code using the OC1 camera.

Step 6: Scan the QR code with the camera

If you heor “wireless connection successful” or “wireless connection succeeded” then select the “Yes” button to proceed.

Step 7: Confirm that the wireless connection was successful

If you hear “wireless connection successful” or “wireless connection succeeded” then select the “Yes” button to proceed.

Step 8: Finalizing the configuration

Select “Configure camera” to save the settings.
Tap on the play icon to see the live stream. (In order to save mobile data, only a still image is shown by default).

Step 9: Hardware installation

For the best performance and experience, the recommended height of the spotlight camera is 2.2m (7.22 feet), camera downward tilt angle of 300.

Note: Ensure thot rain or water will not reach the connector ports at the end of the pigtail wiring. These connectors are not weather-resistant.

Safety Tips

Please make sure to carefully read and follow the installation guide. If there’s something that you don’t understand, please feel free to ask the Remootio Support Team. If you are not sure about ony steps of the installation, please ask Q professional to install the camera for you.

Troubleshooting

Camera not powering on:

If your camera is not powering on, please try the following:

Check if the outlet is working properly. Try to plug the camera into o different outlet and see if the camera turns on.
Check if the DC adapter is working or not. If you have another 12V/1A power adapter, plug it into the camera and see if the camera turns on.
If it still won’t turn on, please contact Remootio support.

Connecting to a new Wi-Fi network

If you would like to connect the camera to a new Wi-Fi network, please select “Delete camera” from the camera settings menu in the Remootio app and reset the camera by long pressing the reset button. After the reset, it is recommended to unplug the camera for at least 10 seconds. Once the reset and unplug cycle is complete, the camera can be set up as a new camera (please see step 1).

Camera live stream is delayed or logging

Make sure that there is a strong enough Wi-Fi signal at the location of the camera.
If needed, add a Wi-Fi hotspot or a Wi-Fi repeater to ensure that you have a strong enough Wi-Fi signal for the camera.

General issues

If nothing else works, please delete the camera from the Remootio app and reset it using the reset button. After the reset procedure, you can set it up as a new camera following the steps from step 1. Make sure that you are using the latest version of the Remootio app.

Product Performance

WLAN frequency (2.4G): 2412MHz – 2472MHz
WLAN frequency (5G): 5725MHz – 5850MHz
Wireless Standard (2.4G): IEEE802.11.b/g/n
Wireless Standard (SC): IEEE802.110/n/ac
Maximal transmission power: < 16dBm
Power Supply: DC 12V I.0A 12W

For the most up-to-date version of this manual, please visit our online tutorials at: www.remootio.com/poges/outdoor-camera-setup- guide

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference
This device must accept any interference received, including interference that may cause undesired operation.

FCC STATEMENT

IMPORTANT NOTE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

For a more detailed guide, please visit: www.remootio.com/pages/outdoor- camera-setup-guide

If you have any questions, please feel free to contact us at support@remootio.com

Scan