Werkes USA WDSCR3-S Exhaust Insert DB Killer User Manual
- June 4, 2024
- Werkes USA
Table of Contents
IT IS RECOMMENDED THAT THIS
PRODUCED BY A QUALIFIED TECHNICIAN
(800)736-2114
WerkesUSA GP Exhaust Insert
For Second Generation WerkesUSA Exhaust ONLY.
A) Remove three Allen Bolts from the exhaust canister using a 3 mm Allen
wrench.
NOTE* Carbon builds up on these bolts. Take your time working bolt
in and out while adding penetrating oil.
B) Position Exhaust Insert into the
exhaust.
C) Align holes. Secure Exhaust Insert
using Allen Bolts previously removed.
NOTE * Red Loc-tite is
recommended.
The purchaser releases Competition Werkes Inc. from all liabilities pertaining to the installation and use of purchased pans. Purchaser recognizes that any alteration and or modifications to the %thick may increase the risk of injury or accident, and may also render the vehicle illegal for use on public roads.
INSERT
Documents / Resources
|
Werkes USA WDSCR3-S Exhaust Insert DB
Killer
[pdf] User Manual
WDSCR3-S Exhaust Insert DB Killer, WDSCR3-S, Exhaust Insert DB Killer, Insert
DB Killer, DB Killer, Killer
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>