Caffenu Vertuo Coffee Machine Instructions
- October 30, 2023
- caffenu
Table of Contents
Caffenu Vertuo Coffee Machine
Instructions for all Vertuo®* Machines filill Plus
- Empty water tank, drip tray & capsule container. *Ensure any used capsules are ejected and close machine (do not lock).
- Place a 34 fl oz/1 L container under the spout.
- Fill the water tank with one dose of descaler (3.38 fl oz/100 ml) and add 17 fl oz/0.5 L of water.
- Close machine (do not lock). Turn the machine on to heat up until the light is steady.
- Enter descaling mode by holding the button for about 9 seconds. The light will start blinking fast.
- Lock the machine and then unlock again. Then hold the button for 9 seconds in “unlocked” position.
- To start descaling, lock the machine again and push the button once. The machine will stop automatically once descaling cycle is complete.
- Let machine stand for 5 minutes.
- Empty and rinse the water tank thoroughly and fill with 34 fl oz/1 L fresh water.
- Press button to begin rinse cycle. Machine will stop automatically.
- Now exit descaling mode by holding the button for 9 seconds.
(Not required with Vertuo®* Next). The button will stop blinking
Instructions for Vertuo®* Plus
- Empty water tank, drip tray & capsule container. *Ensure any used capsules are ejected and close machine (do not lock).
- Place a 34 fl oz/1 L container under the spout.
- Fill the water tank with one dose of descaler (3.38 fl oz/100 ml) and add 17 fl oz/0.5 L of water.
- Turn the machine on to heat up until the light is steady.
- Push the lever down for 3 seconds to turn the machine off.
- Enter descaling mode by pushing the lever and button down at the same time, for 3 seconds. The blinking orange light will indicate that you entered the functions menu.
- Press the lever down ONCE to enter the descaling function.
- Push the button to begin descaling. The machine will stop once descaling is complete, and the orange light will blink during the entire process.
- Empty and rinse the water tank thoroughly and fill with 34 fl oz/1 L fresh water.
- Press button to begin rinse cycle. Machine will stop automatically. The orange light will blink once every 2 seconds, confirming the descaling process is complete.
- Exit descaling mode by pushing the lever and button down at the same time, for 3 seconds. The light will turn green and steady.
- Descaling is now complete. Clean drip tray, cup stand, and capsule container.
- Allow machine to cool for 5 minutes.
- Machine is ready to use.
Note: Descaler can damage surfaces. Avoid splashing/spilling descaler on
acid intolerant surfaces such as marble, limestones, chrome plated steel,
enamel, silver, and wood.
RECOMMENDED USAGE: Descale every 2-4 months. Do not wait for descaling light
to come on. *Estimated Duration: 20mins
Note: The descaling process should not be interrupted. If the machine is turned off during the process, kindly allow the descaling process to be completed. These are general Vertuo®• machine descaling guidelines. Consult your specific machine’s manual for descaling instructions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>