Trailerable Pontoon Boat Cover

Specifications

• Product: GEARFLAG Pontoon Boat Cover
• Applicable Boat Types: Pontoon boat

Product Usage Instructions

Warning

• Do not occupy the boat while the boat cover is put on.

• Do not turn on the engine or motor of the boat when the cover
  is on.

• Never install the cover on a wet day or icy day when the deck
  is slippery.

• Never install on a windy day.

• Make sure boat trailer is securely parked before installing or
  removing the cover.

Note: It is strongly recommended that the cover
be installed and removed by at least two people.

What’s in the Box

• Storage pouch
• Boat cover
• Elastic straps with hooks x 2
• Tie down rope

Before Installation

• Fold down bimini top from the boat before installation.

• Make sure the wheels are securely blocked with wheel
  stoppers.

• Locate the FRONT label in the cover when unfolding the cover.
  The FRONT label side should align with the front of the boat.

Maintenance

• DO NOT machine wash.

• DO NOT use detergent to clean the surface.

• DO NOT use alcohol on the cover surface.

• Keep away from heat or fire.

• Make sure the cover is dry before folding for storage. Do not
  store the cover when it is wet.

• Use a moisture sponge to clean the cover gently if needed.

• Use a soft brush to dust away the dirt on the cover surface if
  needed.

Missing Parts? Replacement? Warranty? Please
contact us at support@gearflag.com

Warning

Avoid sharp objects on the boat. Make sure all sharp objects or
sharp corners are properly covered before installing the boat
cover.

Product Usage Instructions (GEARFLAG TRAILER BOAT COVER)

Carefully place the boat cover on the deck of the boat. Unfold
the boat cover. Locate the FRONT label stitching on the boat cover.
The side with FRONT label should be aligned to the front of the
boat.

Starting from the front, gently pull the boat cover to the rear.
Make sure the cover is covering the entire boat. The elastic hems
of the boat cover should be placed on all corners of the boat. If
necessary, please have another person on the other side of the boat
to help with the installation.

Warning

Avoid sharp objects on the boat. Make sure all sharp objects or
sharp corners are properly covered before tightening the boat
cover.

For boat loading on the trailer: Tie one end of the tie-down
rope through the D-ring on the side of the cover. Pull the rope
down to the trailer frame as shown on the left. Allow enough rope
to make a knot with the end of the rope. You may adjust and tighten
as necessary for the cover on the boat. Cut off the excessive rope
for the rest of the D-rings. Repeat the same process with the rest
of the D-rings.

To prevent fraying of the rope, use a lighter to singe the ends
of the rope.

Note: A support pole (not included) is
recommended for preventing water puddle building upon the boat
cover.

For the boat cover stern and front of the cover, use the 2
supplied elastic straps with hooks to secure with the mainframe of
the trailer as shown on the left.

Connect the tie-down straps to these winbuckles on the boat
cover. Tighten the straps if needed. The straps will go across the
bottom of the boat and buckle with the other end of the cover.

Recommendation

• For better protection from strong wind and storm, tie extra of
  the rope across the trailer.

• For long-term storage, park the boat under a shaded place is
  highly recommended.

Missing parts and warranty: Please contact us
at support@gearflag.com

FAQ

1. 1. Can I install the boat cover by myself?

It is strongly recommended to have at least two people to
install and remove the boat cover.

1. 1. Can I machine wash the cover?

No, machine washing is not recommended. Please follow the
maintenance instructions provided.

1. 1. What should I do if I find missing parts?

Please contact us at support@gearflag.com for assistance with
missing parts.

GEARFLAG PONTOON BOAT COVER
Thismanualappliestoboattypes:Pontoonboat
WARNING
Donotoccupyboatwhileboatcover isputon.
Donotturnontheengineormotorof theboatwhencoverison. Neverinstallthecoveronawetday oricydaywhenthedeckisslippery. Neverinstallonawindyday. *Makesureboattrailerissecurlyparked beforeinstallingorremovingthecover.
Itisstronglyrecommendedthatthe covertobeinstalledandremovedbyatleasttwopeople.
Whatisinthebox

Storage pouch

Boatcover

Before installation

Elastic straps with hooks x 2

Tie down rope

Folddownbiminitopfromtheboatbeforeinstallation

Makesurethewheels are securely blocked withwheelstoppers

The”FRONT”label
Locatethe”FRONT”labelinthe coverwhenunfoldingthecover. The”FRONT”labelsideshould alignwiththefrontofboat

Maintenance
DONOTmachinewash DONOTusedetergenttocleanthesurface DONOTusealcoholonthecoversurface Keepawayfromheatorfire

Makesurethecoverisdrybeforefoldingforstorage.Donotstore thecoverwhenitiswet.
Usemoisturespongetocleanthecovergentlyifneeded *Usesoftbrushtodustawaythedirtonthecoversurfaceifneeded

MissingParts?Replacement?Warranty? Pleasecontactussupport@gearflag.com

WARNING:Avoidsharpobjectsonboat.Makesureallsharpobjectsorsharpcornerareproperlycovered beforeinstallingtheboatcover.

GEARFLAG TRAILER BOAT COVER
Thismanualappliestoboattypes:Pontoonboat
Carefullyplacetheboatcoveronthedeckofthe boat.. Unfoldtheboatcover.Locatethe”FRONT”label stitchingontheboatcover.Thesidewith”FRONT” labelshouldbealignedtothefrontofboat.
Startingfromthefront,gentlypulltheboatcoverto therear.Makesurethecoveriscoveringtheentire boat.Theelastichemsoftheboatcovershouldbe placedonallcornersoftheboat. Ifnecessary,pleasehaveanotherpersononthe othersideoftheboattohelptheinstallation.
WARNING:Avoidsharpobjectsonboat.Makesureallsharpobjectsorsharpcornerareproperlycoveredbeforetighteningtheboatcover.
Forboatloadingonthetrailer: TieoneendofthetiedownropethroughtheD-ringon thesideofthecover.Pulltheropedowntothetrailer frameasshownontheleft.Allowenoughropeto makeaknotwiththeendoftherope.Youmayadjust and tighten as necessary for the cover on the boat. CutofftheexcessiveropefortherestoftheD-rings. RepeatthesameprocesswiththerestoftheD-rings.
Topreventfrayingoftherope,usealightertosinge theendsoftherope.
Supportpole(notincluded)isrecommededfor preventingwaterpuddlebuildingupontheboatcover.
Fortheboatcoversternandfrontofthecover, use the 2 supplied elastic straps with hooks to securewiththemainframeofthetrailerasshown on the left.
Connectthetidedownstrapstothesewinbuckles ontheboatcover.Tightenthestrapsifneeded.
Thestrapswillgoacrossthebottomoftheboatand bucklewiththeotherendofthecover.
Recommendation
Forbetterprotectionfromstrongwindandstorm,tide extraoftheropeacrossthetrailer. Forlongtermstorage,parktheboatundershaded placeishighlyrecommended.
Formissingpartandwarranty,pleasecontactusatsupport@gearflag.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>