FORTIS T1 Pro WalkingPad Foldable Smart Treadmill User Guide

June 15, 2024
FORTIS

FORTIS T1 Pro WalkingPad Foldable Smart Treadmill

FORTIS-T1-Pro-WalkingPad-Foldable-Smart-Treadmill-
product

Product Information

Specifications:

  • Age range: 14-60 years
  • Speed range: 0.5-6km/h
  • Walking surface: 1200x415mm
  • Max weight: 105kg
  • Frequency: 50/60Hz
  • Voltage: 220-240V
  • Power Input: 932W
  • Gross weight: 30kg
  • Net weight: 27kg
  • Operating size: 1432x547x129mm
  • Folded size: 822x547x129mm

Safety & Warnings:
Read all of the instructions in this guide before using this product. Retain this guide for future reference. Do not skip, substitute, or modify any steps or procedures in this guide, as doing so could result in personal injury or product damage.

Components:

  • Treadmill
  • Power cord
  • Remote control
  • Remote lanyard
  • Allen Silicone Key oil
  • User guide
  • Battery (CR2032)

Overview:

  1. Belt
  2. Function buttons
  3. Display
  4. Folding hinge
  5. Mode button
  6. Transport wheels
  7. Power input
  8. Power switch

Function Buttons & Display
The display shows the following information:

  • Time
  • Speed
  • Distance
  • Steps
  • Power
  • Manual mode
  • Automatic mode

Remote Control:
The remote control has the following buttons:

  • Start/Stop
  • Lanyard hole
  • Speed increase
  • Speed decrease
  • Mode

Assembly:

  • Step 1: Unpack all the components from the box.
  • Step 2: Connect the power cord to the power input of the treadmill.
  • Step 3: Ensure the belt is in the center of the treadmill and adjust if required.

Note:
The running belt on this treadmill has a visible joint mark. This is completely normal and will not affect the performance or operation of your treadmill.

Operation:

  • Turning the treadmill On and Off:
    To turn on the treadmill, flip the power switch to the ON position. To turn it off, flip the power switch to the OFF position.

  • Speed Restriction:
    The treadmill has a speed range of 0.5-6km/h. Ensure that you do not exceed this speed range.

  • Manual Mode:
    In Manual mode, users can use the remote control to adjust the speed of the treadmill to suit their needs. It is recommended to start with Manual mode when you are first getting used to your treadmill.

  • Automatic Mode:
    In Automatic mode, users can adjust the speed of the treadmill without using the remote control. Automatic mode is recommended for more advanced users of the treadmill.

  • Cleaning & Care:

    • Cleaning the Treadmill:
      To clean the treadmill, wipe it down with a damp cloth. Do not use harsh chemicals or abrasive materials as they may damage the surface of the treadmill.

    • Belt Adjustment:
      If the treadmill belt begins to slip or is out of alignment, it will need to be adjusted. Press and hold both the Mode and Speed Increase buttons on the remote control for 3 seconds. The treadmill display will show CALI when the issue has been corrected. Adjust again if necessary.

    • Belt Lubrication:
      It is recommended to lubricate the treadmill belt regularly to ensure smooth operation. Refer to the user guide for instructions on how to lubricate the belt.

Troubleshooting:

  • Remote Control Pairing:
    If the remote control becomes unresponsive or if you have replaced the batteries, you will need to re-pair the remote control by pressing and holding the Mode button for 5 seconds.

  • Note:
    If the remote control is not responding, the battery may be flat and will need to be replaced.

  • Troubleshooting:
    If you encounter any issues with your treadmill, refer to the troubleshooting section in the user guide for possible solutions.

Disposal:
This symbol indicates that this appliance should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

FAQ:

  • Q: How do I adjust the speed in Manual mode?
    A: Use the speed increase and speed decrease buttons on the remote control to adjust the speed.

  • Q: How often should I lubricate the treadmill belt?
    A: It is recommended to lubricate the treadmill belt every 3 months or after every 100 hours of use, whichever comes first.

SAFETY & WARNINGS

Read all of the instructions in this guide before using this product. Retain this guide for future reference. Do not skip, substitute or modify any steps or procedures in this guide, as doing so could result in personal injury or product damage.

  • Before starting any exercise program, consult your physician to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. Your physician’s advice is essential if you are taking any medication that may affect your heart rate, blood pressure or cholesterol level.
  • Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, shortness of breath, lightheadedness, dizziness, or feelings of nausea. If you experience any of these conditions, you should consult your physician before continuing with your exercise program.
  • Always wear comfortable properly fitting sports shoes and clothing while using the treadmill. If you experience any discomfort while exercising stop immediately and consult your physician.
  • This equipment is intended for adult use only. Keep children and pets away from the machine. DO NOT leave children unattended in the same room with the equipment. Contact with the moving surface may result in severe friction burns.
  • Do not get on or off the treadmill whilst it is moving as this may result in serious injury and possible damage to the treadmill.
  • When not in use, unplug the power cord.
  • This appliance is designed for consumer use. Follow directions and use only as described.
  • Once fully assembled, inspect to ensure all hardware parts such as bolts, nuts, and washers are positioned correctly and tightly secured.
  • Dry after each use to remove moisture. Wipe regularly with a mild, non-abrasive cleaner and water solution.
  • To ensure safety, the equipment should have at least 50 cm of free space on each side and 200cm behind.
  • Before assembly, ensure you have all the components.
  • Always use the equipment as intended. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, cease use immediately and contact help.kogan.com for assistance. Do not use until resolved.
  • Do not place fingers or any other objects into moving parts of the exercise equipment. Ensure care is taken while setting up and folding the treadmill.
  • Keep hands clear of the hinges while setting up and folding the treadmill.
  • Do not exceed the maximum user weight of 105 kg.
  • Be careful when lifting and moving the equipment. Always use proper lifting techniques and seek assistance if necessary.
  • Your equipment is intended for use in cool, dry conditions. You should avoid storage in extremely cold, hot, or damp areas as this may lead to corrosion and other related problems.
  • This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease use immediately and contact help.kogan.com
  • This equipment is designed and intended for indoor use only.
  • The running belt on this treadmill has a visible joint mark. This is completely normal and will not affect the performance or operation of your treadmill.

WARNING – KEEP BATTERIES OUT OF REACH OF CHILDREN

  • Swallowing may lead to serious injury or death in as little as 2 hours, due to chemical burns and potential perforation of the esophagus.
  • If you suspect your child has swallowed or inserted a button battery immediately call the 24-hour Poisons Information
  • Centre on 13 11 26 (Australia) or 0800 764 766 (New Zealand) for fast, expert advice.
  • Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other mechanical fastener is tightened. Do not use if the compartment is not secure.
  • Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
  • Tell others about the risks associated with button batteries and how to keep their children safe.

COMPONENTS

FORTIS-T1-Pro-WalkingPad-Foldable-Smart-Treadmill-fig-
\(1\)

OVERVIEW

FORTIS-T1-Pro-WalkingPad-Foldable-Smart-Treadmill-fig-
\(2\)

  1. Belt
  2. Function buttons
  3. Display
  4. Folding hinge
  5. Mode button
  6. Transport wheels
  7. Power input
  8. Power switch

Function Buttons & Display

FORTIS-T1-Pro-WalkingPad-Foldable-Smart-Treadmill-fig-
\(3\)

Remote Control

FORTIS-T1-Pro-WalkingPad-Foldable-Smart-Treadmill-fig-
\(4\)

ASSEMBLY

  • Step 1:

    • Lift the rear of the treadmill until the transport wheels come into contact with the floor.
    • Move the treadmill into your desired location. Avoid placing the treadmill on soft cushions or thick carpets.
  • Step 2:

    • Carefully unfold the treadmill, ensuring to keep your hands clear of the hinges.
    • Press the rear of the treadmill down until it is completely flat.FORTIS-T1-Pro-WalkingPad-Foldable-Smart-Treadmill-fig- \(6\)
  • Step 3:
    Ensure the belt is in the center of the treadmill and adjust if required.
    Note:
    The running belt on this treadmill has a visible joint mark. This is completely normal and will not affect the performance or operation of your treadmill.

  • Step 4:

    • Connect the power cord to the treadmill power input.
    • Plug the power cord into a power outlet and place the power switch to the on position.
  • Step 5:

    • Download and install the “WalkingPad” App from App Store (Apple) or Google Play Store (Android).
    • Open the App and follow the prompts to connect to your treadmill.

OPERATION

Turning the treadmill On and Off

  • Press the Power button on the treadmill or the Mode button on the remote control to turn the treadmill on. The display will illuminate and the treadmill will enter Manual mode by default.
  • The user can also power on the treadmill by pressing either the Manual or Automatic buttons. The display will illuminate and the treadmill will enter the respective function.
  • To turn off the treadmill press the power button on the treadmill or press and hold the Mode button on the remote control.

Speed Restriction

  • The maximum speed available will be locked at 3km/h for the first 1km of usage. After accumulating 1km of usage the maximum speed available will be increased to 6km/h.
  • Maximum speed can also be unlocked through the “WalkingPad” app by completing the beginner guide.

Manual Mode
In Manual mode, users can use the remote control to adjust the speed of the treadmill to suit their needs. It is recommended to start with Manual mode when you are first getting used to your treadmill.

  • Speed increase button: Press the Speed increase button to raise the speed of the treadmill by 0.5km/h.
  • Speed decrease button: Press the Speed decrease button to lower the speed of the treadmill by 0.5km/h.
  • Start/Stop button: Press the Start/Stop button on the remote control to stop the treadmill. Press the button again when you are ready to resume exercising.
  • Mode button: Press the Mode button on the treadmill or the remote control to switch between Manual and Automatic mode.

Automatic Mode
In Automatic mode, users can adjust the speed of the treadmill without using the remote control. Automatic mode is recommended for more advanced users of the treadmill.

  • Increase speed: When the user enters the front zone of the treadmill belt the treadmill speed will increase.
  • Decrease speed: When the user enters the rear zone of the treadmill belt the treadmill speed will decrease.
  • Start/Stop button: Press the Start/Stop button on the remote control to stop the treadmill. Press the button again when you are ready to resume exercising.
  • Mode button: Press the Mode button on the treadmill or the remote control to switch between Manual and Automatic mode.

FORTIS-T1-Pro-WalkingPad-Foldable-Smart-Treadmill-fig-
\(10\)

Display

FORTIS-T1-Pro-WalkingPad-Foldable-Smart-Treadmill-fig-
\(11\)

Functions and Features:

  • TIME: Shows your elapsed workout time in minutes and seconds
  • SPEED: Displays your workout speed value in km/h.
  • DISTANCE: Displays the accumulative distance traveled during your workout.
  • STEPS: Displays the accumulative steps traveled during your workout.

CLEANING & CARE

Cleaning the Treadmill

  • Disconnect the power before cleaning the treadmill.
  • Add a small amount of mild detergent to a 100% cotton cloth. Do not spray the detergent directly on the belt or use any acidic and corrosive detergents.
  • Do not wipe under the walking belt

Belt Adjustment
If the treadmill belt begins to slip or is out of alignment, it will need to be adjusted. Press and hold both the Mode and Speed Increase buttons on the remote control for 3 seconds. The treadmill display will show “CALI”.

  • Start the treadmill and run it at a speed of 4km/h
  • To adjust the belt to the left, turn the left adjusting the screw clockwise by 1/2 turn.
  • To adjust the belt to the right, turn the right adjusting screw clockwise by 1/2 turn.
  • To adjust belt tension, turn the left and right adjusting screws clockwise for 1/2 turn at the same time.
  • After each adjustment, run the treadmill for approximately (1-2 minutes) to observe if the issue has been corrected. Adjust again if necessary.

Belt Lubrication

  • Disconnect the power before lubricating the treadmill.
  • Lift the edge of the belt and apply 5-10ml of silicone oil to the inner surface. Do not apply too much oil as this may cause the belt to slip.
  • Run the treadmill at 4km/h for approximately 10-20 seconds.
  • Lubricate the belt every 3 months.

TROUBLESHOOTING

Note:
The running belt on this treadmill has a visible joint mark. This is completely normal and will not affect the performance or operation of your treadmill.

Remote Control Pairing
If the remote control becomes unresponsive or if you have replaced the batteries, you will need to re-pair the remote control by pressing and holding the mode button for 5 seconds.

Note:
If the remote control is not responding, the battery may be flat and will need to be replaced.

Error Indicator

  • E01: Communication fault
  • E02: Voltage protection
  • E03: IPM overheating
  • E04: Low-voltage protection
  • E05: Overcurrent protection
  • E06: Motor protection
  • E08: Sensor fault

Specification

  • Age range 14-60 years
  • Speed range 0.5-6km/h
  • Walking surface 1200x415mm
  • Max weight 105kg
  • Frequency 50/60Hz
  • Voltage 220-240V
  • Power Input 932W
  • Gross weight 30kg
  • Net weight 27kg
  • Operating size 1432x547x129mm
  • Folded size 822x547x129mm

Disposal
This symbol indicates that this appliance should not be disposed of with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Need more information

  • We hope that this user guide has given you the assistance needed for a simple set-up.
  • For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals