AceGamer B0C1YS775X Wireless Gaming Controller User Manual

AceGamer B0C1YS775X Wireless Gaming Controller

Product Information

Specifications

• Model: XYZ-123
• Dimensions: 10 inches (width) x 5 inches (height) x 3 inches (depth)
• Weight: 2 pounds Power Input: 110-240V AC, 50-60Hz
• Battery Type: Lithium-ion
• Battery Capacity: 2000mAh
• Wireless Connectivity: Bluetooth 5.0

Product Usage Instructions

1. Unboxing and Setup

1. Open the package and take out the XYZ-123 product.
2. Remove any protective packaging materials.
3. Place the product on a flat surface.
4. Connect the power cable to the product’s power input.
5. Plug the other end of the power cable into a power outlet.
6. The product will automatically turn on.

2. Pairing with a Bluetooth Device

1. Ensure that the product is turned on and in pairing mode.
2. On your Bluetooth device, navigate to the Bluetooth settings.
3. Enable Bluetooth if it is not already enabled.
4. Select “XYZ-123” from the list of available devices.
5. The product will automatically establish a connection.

3. Charging the Battery

1. Connect the provided charging cable to the product’s charging port.
2. Plug the other end of the charging cable into a power source.
3. The product’s battery indicator will show the charging progress.
4. Once fully charged, disconnect the charging cable.

4. Basic Operations

1. To turn on/off the product, press and hold the power button for 3 seconds.
2. To adjust the volume, use the volume up/down buttons.
3. To play/pause music, press the play/pause button.
4. To skip to the next/previous track, use the next/previous buttons.

5. Maintenance and Cleaning

1. Ensure the product is turned off and disconnected from any power sources.
2. Use a soft, dry cloth to clean the product’s surface.
3. Avoid using harsh chemicals or abrasive materials.

Frequently Asked Questions (FAQ)

Q: How long does the battery last on a single charge?

A: The battery can last up to 8 hours on a single charge, depending on usage.

Q: Can I use the product while it is charging?

A: Yes, you can use the product while it is charging. However, please note that charging may take longer when the product is in use.

Q: Can I connect multiple devices to the product simultaneously?

A: No, the product can only be connected to one Bluetooth device at a time. To connect to another device, you need to disconnect the current device first.

Q: How can I reset the product to factory settings?

A: To reset the product, press and hold the power button for 10 seconds until the LED indicator flashes. This will reset all settings and clear paired devices.

INSTALLATION

INSTALLATION METHOD AND INSTRUCTIONS FOR REMOTE CONTROL

INSTALLATION METHOD AND INSTRUCTIONS FOR THE MAIN BODY

1. Do not discard important information in the manual;
2. Please read the operation procedures and safety warnings carefully before operation;
3. If there is no adult supervision. please do not let children use it independently, and the battery should be placed out of the reach of children;
4. Please do not mix new and Old batteries and different models Of batteries cannot be installed at the same time;
5. Disposable batteries cannot be recharged. Please keep the batteries away from the fire source;
6. If the remote control is not used for a long time, the battery needs to be removed.

FCC Caution

Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.

Changes or modification warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>