IROK FE75Pro Hot Swappable Mechanical Keyboard User Manual
- June 15, 2024
- IROK
Table of Contents
FE75Pro Hot Swappable Mechanical Keyboard
User Manual
System Requirements
- Wired mode: Windows XP/Vista/Mac/Windows T/windows 8/windows 10/windows 11
- 2.4G mode: Windows XP/Vista/Mac/Windows 7/windows 8/windows 10/windows 11
- BT mode: Windows 7/windows 8/windows 10/windows 11/Mac
- Interface: free USB port (1.1/2 .0/3.0/3.1}
Installation Steps
- Take out the keyboard, plug the USB cableinto the computer USB port, or 2.4G receiver into the computer USB port, and turn on the keyboard power switch.
- System will automatically install a good driver, if the installation fails, please restart the computer,
- Wait for the computer to prompt the new hardware has been installed, at this time you can use your keyboard. Note: it is recommended to connect the USB2.0 interface.
Tips
- Adjust the kickstand for viewing angle adjustment, to adapt to the visual and operational.
- Keyboard should not enter other liquids (otherwise it will damage the keyboard).
- Regularly clean the keyboard to avoid accumulating too much dust to affect the touch.
Connection mode
- Wired mode: When the switch is set to OFF state, it will turn off the power of 2.4G mode and BT mode. At this time, after inserting the USB cable, it is wired connection mode.
- 2.4G mode: When the switch is set to 2.4G, it is 2.4G connection mode
- BT mode: When the switch is set to BT, it is BT connection mode
BT pairing
- Win8 or above system default BT device name display: BT5.0 KB Win? system default BT device name display: BT3.0 KB
- BT mode can connect and switch three devices at the same time: Long press FN+1/2/3 key for 3 seconds for the corresponding BT pairing, BT pairing is complete, short press FN+1/2/3 key to switch between BT devices, the first time to switch to BT mode, is automatically into the broadcast state, the default is BT 1
BT1/BT2/8T3
-
F1/F2/F3 key BT status indicator:
Switch to BT1 device, the upper left comer light bar blue light prompt flashing; switch to BT2 device, the upper left corner light bar purple light prompt flashing; switch to BT3 device, the upper left corner light bar cyan light prompt flashing, After the successful switch, the light goes off, and the backlight state returns to the previous function. -
FN + — keys, long press 5 seconds to clear the BT paling record, only in the BT mode this function Is effective
Light tips
- Light band function: flowing light – neon – always on – breathing – off (Always on and breathing mode can switch monochrome light: red/green/blue/orange/purple/cyan/white) with FN + to switch the light band light effect.
- Connection made prompt light, prompt after the fretum to the default light effect state BT mode prompt: BT1 blue light / 8T2 purple light / BT3 cyan light 2.4G mode prompt: green light prompt
- Do Caps Lock case prompt, white light prompt when opened; do Num Lock function prompt, white light prompt when opened; do win key lock function prompt, orange light prompt when locked; (prompt length 5 seconds, prompt after restoring to the current light effect state}
FN + switch light with light effect
FN + -> switch the light strip monochrome light effect
FN+ f increase the brightness of the strip
FN + J the brightness of the light band to reduce
Power tips
In the space bar below the charging tips and low battery tips light: Charging tips: green light slow flashing, full to restore the backlight effect mode after low battery tips: red light flashing, to the main key area backlight hibernation so far
OS key switch
FN+N: switch to support the Windows system general key function (factory
default for Windows)
FN+B: switch to be compatible with the Mac system standard key function,
special function keys are Nat supported.
Intelligent power saving function
Keyboard in 2.4G and BT mode more than 3 minutes without any key action automatically tum off the key backlight, more than 30 minutes without any key action automatically enter the power-saving hibernation state, after entering the hibernation state, press any key to wake up the keyboard.
Key combination functions
Pressing the FN key and the function key at the some time will active the second function of the function Key. The following are the function Kayson their function descriptions,
Product warranty card
Thankyou for your trust and support, in order to let you use this product with
confidence and better protect your rights and interests, our company will
strictly comply with and implement the relevant provisions of the
implementation of after-sales service, quality assurance 12 months from the
date of purchase, according to the provisions of the responsibility for the
repair and replacement of microcomputer goods return service.
Does not belong to the service scope:
- Has exceeded the effective service or free warranty period;
- Failure to follow the correct instructions for use, maintenance, storage resulting in failure or damage;
- Failure or damage caused by non-authorized maintenance agencies;
- Due to force majeure (such as natural disasters, etc.) caused by product failure;
- Human factors lead to product failure (such as operating errors, bump, input unsuitable voltage, etc.) f. Other non-product design, technology, manufacturing, quality and other issues lead to failure or damage.
Product Model:…………………………………………
Date of purchase:…………………………………………
Customer name:…………………………………………
Contact phone:…………………………………………
Contact address:…………………………………………
MFR.: Bei jingo Tonging Technology Co. , LTD
Tel:010-86396510
Address: Room 401, 1F, Building 4, No.5 Jiangnan Road, Chaoyang District,
Beijing
E-mail: www.irok.com
Enterprise execution standard number.GB/T 14081-2010
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>