eisl DX12004BL-A EASY ENERGY Shower Set Instruction Manual

: June 15, 2024
: eisl

Table of Contents

DX12004BL-A EASY ENERGY Shower Set
Proper use
Safety notes
**** Installation Instructions
Instructions for care
Maintenance
Decommissioning
Disposal
Documents / Resources

Montageanleitung
Überkopfbrause-Set DX12004BL-A
EL-BAD-ÜBS-DX12004BL-A_0423

DX12004BL-A EASY ENERGY Shower Set

Eisl Sanitär GmbH • Himmelreich 1
5020 Salzburg (Austria)
info@eisl.at • www.eisl.at

Dear customer,
You have purchased a high-quality and long-lasting product from our line of goods. Please read these instructions carefully before assembling and observe the notes.
Therefore, keep the instructions in a safe place and pass them on to possible subsequent owners.

Proper use

This product is suitable for use with instantaneous water heaters. It is not suitable for low pressure water heaters such as wood or coal burning bath geysers, oil or gas bath geysers, open electrically heated water tanks. Any use other than that described here or modification to the product is not permitted and may lead to damage to persons or property. There is also the risk of injury and loss of life. The product is intended for personal use only and not for medical or commercial use.

Safety notes

Only allow experts carry out the installation work.
CAUTION DAMAGE BY WATER! Prior to installation please turn the general water supply off.
Ensure that all gaskets have the correct fit.
These taps are not suitable for use on low pressure and small electrical storage heaters.
We recommend the installation of a filter into the appliance or at least the use of angle valves with filter, in order to avoid the inflow of foreign matter, which could damage the cartridge.
This tap is only intended for use in private households! Only suitable for use in rooms with a temperature over 0 °C, when there is danger of frost, sut off the water supply and empty the tap.
Take care when adjusting the warm water. Danger of scalding!
Incorrectly installed fittings can cause water damages!
Please ensure that no caustic or corrosive products such as detergents or household cleaning products make contact with the connection hoses; this can lead to water damages.
Despite careful production, sharp edges can occur. Please exercise caution!
DANGER OF LOSS OF LIFE AND ACCIDENT TO INFANTS AND CHILDREN! Never leave children unsupervised with the packaging materials. Danger of suffocation.
CAUTION! DANGER OF INJURY! Please ensure that no parts are damaged and that all parts are correctly assembled. Incorrect assembly or fitting may lead to injury.
Damaged parts can adversely affect safety and proper function.
CAUTION DANGER OF WATER DAMAGE! Before installation please ensure that there are no water pipes where you are intending to drill.
Examine the wall before installation and choose suitable installation fixings. We have supplied fixings suitable for an ordinary solid masonry wall.
Please note that seals are wear parts and therefore will require to be replaced from time to time.
Warning – risk of electrocution! Make sure that there are no electrical power lines where you are drilling before starting to drill holes.

**** Installation Instructions

Check all connections carefully after first-time use to make sure that they are tight.
We do not assume any warranty for incorrect installation in particular for subsequent damages!

Shower settings
Use the diverter to set which shower mode is activated (overhead shower or hand shower).
The slope of the overhead shower can be set as desired by the user.

Instructions for care

Sanitary taps require special care. Therefore, please observe the following instructions:
Chrome-plated surfaces are sensitive to lime-dissolving agents, acidic cleaning agents and all kinds of abrasives.
Never clean coloured surfaces with abrasive, corrosive, or alcoholic agents.
Only clean your taps with clear water and a soft cloth or a shammy.

Maintenance

Please check all joints and connections for leaks or visible damages at regular intervals.
In case of any leaks or visible damages to the fitting or connection hoses, these should be immediately checked by a specialist and replaced if necessary.

Decommissioning

Cut off the water supply before dismantling the product.
Pay attention to escaping residual water.
Disassemble the product in the reverse order of the assembly instructions.

Disposal

Your washbasin tap is delivered in a solid packaging, in order to protect it against transport damages. The packaging consists of recyclable materials. Dispose it in an environmentally suitable manner.
Do not throw the product into the normal domestic waste at the end of its service life, but ask your municipal administration about the possibility of an environmentally friendly disposal.
****The illustrations are to be considered as figurative representations, deviations of the product are possible. Subject to technical modifications.

Documents / Resources

| eisl DX12004BL-A EASY ENERGY Shower Set [pdf] Instruction Manual
DX12004BL-A EASY ENERGY Shower Set, DX12004BL-A, EASY ENERGY Shower Set, ENERGY Shower Set, Shower Set, Set
---|---