IMO HD2-NK1-4 HD2 High Performance Inverter Installation Guide
- June 15, 2024
- imo
Table of Contents
IMO HD2-NK1-4 HD2 High Performance Inverter Installation Guide
For NEMA 1 Kit Frames 1-5:
Step 1
Place the drip-cover behind the drive and align the mounting holes of the
drip-cover with the top mounting holes of the drive. Use the screws for
mounting the drive to secure the drive and the drip cover to the mounting
surface.
Screw quantity supplied: 4
Screw specifications: Same as mounting screws
Step 2
Align the bottom mounting holes of the drive with the mounting holes of the
junction box. Use four screws to secure the junction box and drive to the
mounting surface.
Screw quantity supplied: 4
Screw specifications: Same as mounting screws
Step 3
Mount the junction box face plate to the junction box base. Align the holes of
the junction box face plate with the junction box base. Use two screws to
secure the junction box face plate to the junction box base.
Screw quantity supplied: 2
Screw specifications: M4x10
For NEMA 1 Kit Frames 6-7:
Step 1
Insert four screws through the junction box
mounting holes and secure to the bottom plate of the drive.
Screw quantity supplied: 4
Screw specifications: M4x12
NEMA Kit Cross Reference
For more information visit www.imopc.com
Errors and omissions excepted. Subject to change without notice. © 2023 IMO Precision Controls Ltd
REF: HD2 NEMA 1 Kit Installation Guide 0423
Read More About This Manual & Download PDF: