DECO BREEZE DBF0209 16 Inch Metal Floor Standing Fan Instruction Manual

DECO BREEZE DBF0209 16 Inch Metal Floor Standing Fan

Product Information

Specifications:

• Model: 16 Metal Floor Standing Fan
• Power Source: 120V AC Electrical Outlet
• Usage: Indoor household use only

Overview of Functions:

The 16 Metal Floor Standing Fan is a powerful and adjustable fan designed for indoor household use. It provides a cooling breeze and helps circulate air in the room. Please read the following instructions carefully before using the fan.

Safety & Warnings:

1. Use the fan only for the specific purpose outlined in this instruction information.
2. Do not operate the fan until fully assembled.
3. Ensure the correct voltage (120V AC) is being used.
4. Unplug the fan when not in use, changing locations, before assembly or disassembly, or before cleaning.
5. Do not immerse the fan or expose it to any form of liquid.
6. Avoid contact with moving parts. Never insert fingers or objects through the fan grill during operation.
7. Place the fan on a stable and level surface to avoid tipping or being knocked over accidentally.
8. Avoid operating the fan near curtains, plants, window coverings, etc. to avoid accidental entanglement.
9. For indoor household use only. Do not use outdoors or for industrial or commercial purposes.
10. Avoid placing the fan or its electrical cord under rugs or carpeting to prevent fire hazards.
11. Keep the electrical cord away from busy areas to avoid accidental tripping and contact.
12. Always insert or remove the plug from the outlet by grabbing the plug by hand. Do not pull on the electrical cord.
13. Never operate the fan near an open flame or in the presence of explosive or combustible gases or fumes.
14. If the fan or its electrical cord becomes damaged or malfunctions, discontinue operation and seek certified repair.
15. Avoid exposing the fan to excessive heat or humidity, as it can cause damage to the electrical components.
16. Keep the fan out of the reach of children and pets.
17. Do not expose infants or seniors to prolonged periods of direct cold air.

Fan Assembly:

1. Carefully unpack the fan base, motorhead, fan grill (front and back), and fan blades from the Styrofoam packing cradle.
2. Remove the center lag bolt, black plastic locking screw, small set screw, and black tilt adjustment screw from the fan motor attachment base. (see Picture A )
3. Attach the fan motor to the upright fan base by sliding down and aligning the screw holes.
4. Insert the lag bolt and secure it with the black plastic locking nut.
5. Re-insert the set screw and black plastic tilt adjustment screw and tighten securely.
6. Remove the black plastic locking nut screw from the fan motor pin. (see Picture A )
7. Remove the cap screws from the fan motor face plate.
8. Fit the rear grill assembly onto the motor pin by lining up the screw holes. Ensure the fan grill handle is at the top center of the alignment and reinsert and tighten the screws in place. (see Picture B )
9. Reattach the black plastic locking nut by screwing it clockwise until firmly tightened.
10. Loosen the set screw on the fan blade assembly. (see Picture C )
11. Remove and discard the black protective covering from the fan blades.

Frequently Asked Questions (FAQ)

Q: Can I use this fan outdoors?
A: No, this fan is designed for indoor household use only.
Q: What is the power source for this fan?
A: This fan requires a 120V AC electrical outlet.
Q: How should I clean the fan?
A: Unplug the fan and use a soft, damp cloth to wipe the fan blades and grille. Do not immerse the fan in water or use harsh chemicals.
Q: Can I adjust the height of the fan?
A: No, the height of this floor-standing fan is fixed and not adjustable.
Q: Is it normal for the fan to make noise?
A: Some noise is expected during operation, but if you notice any unusual or excessive noise, please contact customer support for assistance.

READ AND SAVE THIS INSTRUCTION

Overview of Functions

Please read the following instructions carefully and retain a copy of this information for future reference. When using this or any electrical appliance, the following safety precautions should be strictly followed:

Safety & Warnings

• Use the fan only for the specific purpose outlined in this instruction information.
• Do not operate fan until fully assembled.
• Ensure the correct voltage is being used before plugging in your fan (120V AC Electrical Outlet).
• Unplug fan from the outlet when not in use, when changing locations, before assembly or disassembly, or before cleaning.
• Do not immerse fan or expose fan to any form of liquid.
• Avoid contact with all moving parts. Never insert your fingers, pencils or other objects through the fan grill during operation.
• Place your fan on a stable and level surface to avoid tipping or being knocked over accidentally.
• Do not operate the fan directly adjacent to curtains, plants, window coverings, etc. to avoid accidental entanglement.
• For indoor household use only. Do not use outdoors or for industrial or commercial purposes.
• To avoid potential fire hazards, never place your fan or its electrical cord under rugs, or carpeting.
• Place the electrical cord away from busy areas to avoid accidental tripping and contact.
• Always insert or remove plug from the outlet by grabbing the plug by hand. Do not pull on the electrical cord.
• Never operate your fan near an open flame or in the presence of explosive or combustible gases or fumes.
• Should your fan (including the electrical cord) ever become damaged or a malfunction occur, discontinue operation at once until a certified repair has been made.
• Do not expose your fan to excessive heat or humidity, as this can cause damage to the electrical components.
• Keep your fan out of the reach of children and pets.
• Do not expose infants or seniors to prolonged periods of direct cold air.

Fan Assembly

1. Carefully unpack the fan base, motorhead, fan grill (front and back) and fan blades from the Styrofoam packing cradle.
2. Attach the round fan base to the fan base pole by inserting the pole through the round fan base and securing together using the black center weight, washer, and L shape screw – as shown in the diagram.}
3. Remove the center lag bolt and black plastic locking screw, the small set screw, and the black tilt adjustment screw from the fan motor attachment base. (see Picture A)
4. Attach the fan motor to the upright fan base by sliding down and aligning the screw holes.
5. Then insert the lag bolt and secure it with the black plastic locking nut.
6. Re-insert the set screw and black plastic tilt adjustment screw and tighten securely.
7. Remove the black plastic locking nut screw from the fan motor pin. (see Picture A)
8. Remove the cap screws from the fan motor face plate.
9. Fit the rear grill assembly onto the motor pin by lining up the screw holes. Make sure the fan grill handle is at the top center of the alignment and re-insert and tighten the screws in place.(see Picture B)
10. Reattach the black plastic locking nut by screwing it clockwise until firmly tightened.
11. Loosen the set screw on the fan blade assembly. (see Picture C)
12. Remove and discard the black protective covering from the fan motor pin.
13. Slide the fan blade assembly onto the motor pin until flush with the end of the pin and tighten the set screw securely. (see Picture C)
14. On the outside edge of the front fan grill, open the 4 fan grill clamps so they are positioned perpendicular to the grill.
15. Attach the front grill assembly to the rear grill assembly by locking the top “fork” edge, then swing down and affix with the metal clamps.
16. You are now ready to enjoy your fan!

Fan Use

1. The speed selector switch is located on the back of the motor housing. To operate, simply twist the knob to the desired setting. Your fan features 3 speed settings (I – Lowest Speed, II –Medium Speed, III – Highest Speed). 0 – Fan is turned off.
2. The fan can operate in a stationary or an oscillating mode. To shift between modes, simply pull up or depress the Oscillation Button located next to the speed switch on the fan motor.
3. You can adjust the angle of your fan by adjusting the tilt adjustment screw underneath the fan motor at the base. Be sure to firmly tighten the screw when the desired angle is achieved.

Care & Cleaning

1. Always turn your fan to the off position prior to cleaning.
2. Clean parts with a duster or damp cloth. Prior to resuming use, make sure all moisture is dry.
3. Do not immerse in any type of liquid or use abrasive cleaning solutions.
4. Use care around the motor housing as no excessive moisture or liquid should come in contact with the motor housing or its parts.
5. When storing your fan, make sure to place in a dry environment. To reduce dust and particle exposure, it is best to cover your fan – especially in the off-season period.

Warranty Information

3One (1) Year Limited Warranty
Service instructions: DO NOT attempt to repair or modify any mechanical or electrical parts of this fan. Doing so will void this warranty.

1. This Warranty applies ONLY to the original owner of this product.
2. This Warranty applies ONLY to the repair or replacement of any manufactured parts of this fan unit. Global Product Resources, Inc. reserves the right to determine if repair or replacement is warranted.
3. Operating the fan under conditions or usage not specified in the warnings, instructions, or care directions, or attempts to repair or modify the fan in anyway will render this Warranty void.
4. Unless otherwise prescribed by law, Global Product Resources, Inc. will not be liable for any personal injury, property or any incidental or consequential damage of any kind (including water damage) resulting from misuse, defects, malfunctions, improper installation or alterations of this product.
5. All parts of this product are guaranteed for a period of one (1) year from the date of purchase as follows.
6. If you experience any other problem or claim with this product, please contact our customer service department at (800) 979

Return Instructions
Please follow the directions below when initiating a Warranty Return:

1. Please pack your fan in its original carton or other carton and packing materials to insure no additional damage occurs in shipping.
2. Please include your full name, address with zip code and telephone number.
3. Additionally, please include a copy of your original sales receipt or Proof of Purchase.
4. Please also include a summary of the defect or problem that is occurring with the unit.
5. All shipping charges to be paid by the sender.
6. Call 800-979-4326 for return authorization.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state. The provisions of this Warranty are in addition to, and not a modification of, or subtraction from, the statutory warranties and other rights and remedies contained in any applicable legislation. To the extent that any provision of this Warranty is consistent with any applicable law, such provision shall be deemed voided or amended, as necessary, to comply with such law.
Deco Breeze is a trademark of Global Product Resources, Inc.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>