guard RFID PT-4-BLE Patient Tag User Manual
- June 15, 2024
- guard RFID
Table of Contents
PT-4-BLE
Patient Tags
FEATURES:
- Small and light for comfort
- 12 Months battery life
- Temperature sensor
- Waterproof, IP68
DESCRIPTION:
The PT-4-BLE is an is an active tag that features 12 months of battery life. The tag advertises its location using Bluetooth Low Energy (BLE) signal. Patient Tags work with the Guard RFID® All Guard® software to provide real- time location services. The All Guard software can be configured to control doors to speed patient flow to scheduled medical examinations or protect patients from suspicious activity.
SPECIFICATIONS:
| Product | PT-4-BLE |
|---|---|
| Part Number | 61-10116 |
| Software Compatibility | All Guard Server 8.1 or later, HID Bluzone™ |
| Bluetooth Standard | Bluetooth 5.2 |
| Frequency Band | 2400-2483.5 MHz |
| Battery Life | 12 months |
| Beacon Interval | 12 seconds |
| Compatible with Mother Tags | Yes |
| Dimensions | 28 x 14.5 mm (1.1 x 0.57”) |
| Weight | 6.62 g (0.23 oz) |
| Waterproof | Yes, designed to IP68 |
| Operating Temperature | -30°C to 50°C (-22° F to 122°F) |
| Humidity | 0 – 100% |
| Regulatory | FCC Part 15.249, IC, UL-294 |
| Warranty | 12 months |
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules and with Industry Canada
license‐exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Accessories
PT-4-BLE with Mounting Band
PT-1BLF MOUNTING BAND – EXTRA STRENGTH:
Part Number: 61-12102
- Wide, heavy duty material for added strength
- Features a special pre-applied, permanent locking snap closure that easily fastens
- Latex free, waterproof
- 381 x 17.3 mm (15 x 0.7”), white
- 100 pack
PT-4-BLE in wristband
TAG WRISTBANDS:
Part Number: 61-12046
- Soft, comfortable, watch-style wristbands
- 10” long, removable clasp
- Made of Thermoplastic Polyurethane (TPU) material that is anti-bacterial and designed to withstand repeated exposure to hot water and steam
Guard RFID Solutions Inc. sales@guardRFID.com •
866.785.7343
Specifications Subject to Change Without Notice. ©2023 Guard RFID Solutions,
Inc., part of HID Global Corporation.
All Rights Reserved. Guard RFID and All Guard are registered trademarks of
Guard RFID Solutions Inc.
02-00175-100
FCC ID: VZK-PT4 IC ID: 9937A-PT4
02-00175-100