Jabra Elite 4 True Wireless Noise Cancelling In Ear Headphones User Guide
- June 15, 2024
- Jabra
Table of Contents
Jabra Elite 4 True Wireless Noise Cancelling In Ear Headphones
Product Information
Specifications
- Product Name: Jabra Elite 4 – Dark Grey
- Bluetooth Profile: Advanced Audio Distribution Profile (A2DP)
- Color: Dark Grey
The Jabra Elite 4 – Dark Grey is a Bluetooth headset that utilizes the Advanced Audio Distribution Profile (A2DP) to enable high-quality multimedia audio communication. With A2DP, you can enjoy listening to music wirelessly from your supported Bluetooth device. Please note that A2DP is not supported by all Bluetooth devices. It is recommended to check the user manual of your Bluetooth device to ensure compatibility.
Product Usage Instructions
Step 1: Charging
Before using the Jabra Elite 4 – Dark Grey, make sure it is fully charged.
Connect the included USB charging cable to the charging port on the headset
and the other end to a USB power source. The LED indicator on the headset will
turn solid red during charging and will turn off once fully charged.
Step 2: Pairing
To pair the Jabra Elite 4 – Dark Grey with your Bluetooth device, follow these
steps:
- Ensure that your Bluetooth device is in pairing mode.
- Press and hold the power button on the headset for approximately 5 seconds until the LED indicator starts flashing blue.
- Select “Jabra Elite 4” from the list of available devices on your Bluetooth device.
- If prompted, enter the PIN code “0000” to complete the pairing process.
Step 3: Using the Headset
Once the Jabra Elite 4 – Dark Grey is paired with your Bluetooth device, you
can use the following controls:
- Power On/Off: Press and hold the power button for approximately 2 seconds to turn the headset on or off. The LED indicator will flash blue when the headset is turned on.
- Volume Control: Press the volume up or volume down button to adjust the volume level.
- Play/Pause Music: Press the play/pause button to play or pause music playback.
- Answer/End Calls: Press the answer/end call button to answer or end incoming calls.
Frequently Asked Questions (FAQ)
-
Q: What is A2DP?
A: A2DP stands for Advanced Audio Distribution Profile, which is a Bluetooth profile that enables high-quality audio streaming between compatible devices. -
Q: Is A2DP supported by all Bluetooth devices?
A: No, A2DP is not supported by all Bluetooth devices. It is recommended to check the user manual of your Bluetooth device to ensure A2DP compatibility. -
Q: Where can I find more information about Jabra Elite 4 – Dark Grey?
A: For more information about Jabra Elite 4 – Dark Grey, you can visit the official Jabra support page at https://www.jabra.com/supportpages/jabra- elite-4/100-99183700-98/faq/41d66ab46391-4f08-8708-550b3d6a6a57.
Advanced Audio Distribution Profile (A2DP)
What is the Advanced Audio Distribution Profile (A2DP)?
Advanced Audio Distribution Profile (A2DP) is a Bluetooth profile that enables
multimedia audio communication, such as music, between a Jabra headset and a
supported Bluetooth device. A2DP is used in selected Jabra headsets.
Note:
A2DP is not supported by all Bluetooth devices. Check the user manual of your
Bluetooth device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>