RYOBI RI4 4V Cordless Inflator Instructions

RYOBI RI4 4V Cordless Inflator

Product Information

Specifications

• Languages: English, French, German, Spanish, Italian, Dutch, Portuguese, Danish, Swedish, Finnish, Norwegian, Russian, Polish, Czech, Hungarian, Romanian, Latvian, Lithuanian, Estonian, Croatian, Slovenian, Slovak, Bulgarian, Ukrainian, Turkish, Greek
• Model: RI4

Product Usage Instructions

Important Safety Instructions
Before assembling, maintaining, and operating the product, it is essential to read and follow these instructions:

• Do not exceed the maximum pressure marked on the product. Excessive pressure can be dangerous.
• Ensure that the hose is free from obstructions and tangles to prevent accidents.
• Never leave the product unattended with the hose connected and running.
• Avoid placing the product in wet or damp areas to reduce the risk of electrical shock.
• Discontinue use if the product does not function properly or if there are any issues with the hose.
• Always disconnect the air and power supply before making any adjustments or repairs.
• Regularly inspect the product for cracks, pin holes, or other imperfections that may affect its performance.
• Do not use the product as a toy or for any unintended purposes.
• Avoid blowing dust and dirt towards yourself or others when using the product.
• Do not use the product to spray flammable substances.

Product Intended Use
The product is intended for inflating and deflating various items.

Product Safety Warnings
Ensure to follow these safety warnings when using the product:

• Do not exceed the maximum pressure of the product.
• Check the hose for any obstructions or damages before use.
• Never leave the product unattended with the hose connected and running.
• Avoid placing the product in wet or damp areas.
• Do not use the product if it is not functioning properly or if there are any issues with the hose.
• Always disconnect the air and power supply before making any adjustments or repairs.
• Inspect the product regularly for any cracks, pin holes, or imperfections that may affect its performance.
• Do not use the product as a toy or for unintended purposes.
• Avoid blowing dust and dirt towards yourself or others when using the product.
• Do not use the product to spray flammable substances.

Frequently Asked Questions (FAQ)

• Q: What is the intended use of this product?
  A: The product is intended for inflating and deflating various items.

• Q: Can I exceed the maximum pressure marked on the product?
  A: No, it is important to never exceed the maximum pressure as it can be dangerous.

• Q: Can I leave the product unattended with the hose connected?
  A: No, it is important to never leave the product unattended with the hose connected and running.

• Q: Can I use the product in wet or damp areas?
  A: It is recommended to avoid using the product in wet or damp areas to reduce the risk of electrical shock.

• Q: What should I do if the product is not functioning properly?
  A: Discontinue use if the product does not function properly or if there are any issues with the hose.

Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating the product.

Subject to technical modification

ORIGINAL INSTRUCTIONS

Safety, performance, and dependability have been given top priority in the design of your high pressure inflator.

INTENDED USE
The high pressure inflator is intended for inflating high pressure items such as car tyres, bicycle tyres and sports balls. NOTE: Refer to the product documentation or the labels of the item to be inflated for correct pressure. Do not use the product for any other purpose.

• WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
• Save all warnings and instructions for future reference.

INFLATOR SAFETY WARNINGS

• Risk of bursting. Do not preset the product resulting in its output pressure to be greater than the marked maximum pressure of the item to be inflated. Do not use at pressure greater than 100 PSI.
• Make sure the hose is free of obstructions or snags. Entangled or snarled hoses can cause loss of balance or footing and may be damaged.
• Never leave the product unattended with the hose still connected and operating.
• To reduce the risk of electrical shock, do not put the product in water or other liquid. Do not place or store an appliance where it can fall or be pulled into a tub or sink.
• Discontinue use if the product does not function properly or the hose leaks.
• Do not attempt to pull or carry the product by the hose. Always disconnect the air and power supply before making adjustments and servicing, or when not in use.
• Inspect the product yearly for cracks, pin holes or other imperfections that could cause the product to become unsafe. Never cut or drill holes in the product. To reduce the risk of electric shock, do not expose the product to rain. Store the product indoors.
• The product is intended for household use only.
• Do not use the product as a breathing device.
• Never direct a jet of compressed air toward people or animals. Take care not to blow dust and dirt towards yourself or others. Following this rule will reduce the risk of serious injury.
• Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this rule will reduce the risk of serious personal injury.
• Do not use the product to spray chemicals. Your lungs can be damaged by inhaling toxic fumes.
• Check damaged parts. Before further use of the inflator or air tool, a guard or other part that is damaged should be carefully checked to determine that it will operate determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre. Following this rule will reduce the risk of shock, fire, or serious injury.
• Risk of bursting. Carefully monitor objects during inflation.
• To reduce the risk of over inflation, use a reliable pressure gauge periodically during inflation. The pressure gauge on the inflator is for reference only and is therefore not binding for exact values.
• Allow the product to cool for five (5) minutes after each five (5) minutes of continuous use. Never block the inflating or deflating outlets while operating.
• Save these instructions. Refer to them frequently and use them to instruct others who may use this inflator. If you loan someone this inflator, loan them these instructions also.
• Ambient temperature range for tool during operation is between 0°C and 40°C.
• Ambient temperature range for tool storage is between 0°C and 40°C.
• The recommended ambient temperature range for the charging system during charging is between 10°C and 38°C.

ADDITIONAL BATTERY SAFETY WARNINGS

• To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach- containing products, etc., can cause a short circuit.
• Ambient temperature range for battery during use is between 0°C and 40°C.
• Ambient temperature range for battery storage is between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national provisions and regulations. Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

See page 89.

1. Pump outlet
2. LED light
3. Pressure gauge
4. Power button
5. Battery cap
6. Air hose
7. Air chuck clamp
8. Air chuck
9. Sports ball needle
10. Presta valve adaptor
11. Storage bag
12. Operator’s manual
13. USB charging cable
14. Battery pack
15. USB power adaptor

MAINTENANCE

• The product should never be connected to a power source when assembling parts, making adjustments, cleaning, performing maintenance, or when the product is not in use. Disconnecting the product from the power supply will prevent accidental starting that could cause serious injury.
• When servicing, use only original manufacturer’s replacement parts, accessories and attachments. Use of any other parts may create a hazard or cause product damage.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc. Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury. For greater safety and reliability, all repairs should be performed by an authorised service centre.

SYMBOLS

• Do not dispose of waste batteries, waste electrical and electronic equipment as unsorted municipal waste. Waste batteries and waste electrical and electronic equipment must be collected separately. Waste batteries, waste accumulators, and light sources have to be removed from the equipment.
• Check with your local authority or retailer for recycling advice and collection point. According to local regulations, retailers may have an obligation to take back waste batteries and waste electrical and electronic equipment free of charge. Your contribution to the reuse and recycling of waste batteries and waste batteries and waste electrical and electronic equipment helps to reduce the demand of raw materials. Waste batteries, in particular containing lithium, and waste electrical and electronic equipment contain valuable and recyclable materials, which can adversely impact the environment and the human health if not disposed of in an environmentally compatible manner.
• Delete personal data from waste equipment, if any.

WARNING
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in accordance with a standardised test and may be used to compare one tool with another. They may be used for a preliminary assessment of exposure. The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ. These conditions may significantly increase the exposure levels over the total working period. An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is running idle. These conditions may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the accessories, keeping the hands warm (in case of vibration), and organizing work patterns.

specifications

• High pressure inflator
• Model
• Voltage
• Pressure hose length
• Maximum pressure
• Gauge accuracy
• Pump displacement
• Weight – excluding battery pack
• Weight (According to EPTA-Procedure 01/2014)

RYOBI WARRANTY APPLICATION CONDITIONS

In addition to any statutory rights resulting from the purchase, this product is covered by a warranty as stated below.

1. The warranty period is 24 months for consumers and commences on the date the product was purchased. This date has to be documented by an invoice or other proof of purchase. The product is designed and dedicated to consumer and private use only. So there is no warranty provided in case of professional or commercial use. This warranty applies only on new products.
2. There is a possibility to extend for a part of the range of power tools (AC/DC) the warranty period over the period described above using the registration on the www.ryobitools.eu website. The eligibility of products for extended warranty is clearly displayed in stores and / or on packaging and is contained within the product documentation. The end user is required to register his/her newly- acquired products online within 30 days from the date of purchase. The end user may register for the extended warranty in his/her country of residence if listed on the online registration form where this option is valid. Furthermore, end users must give their consent to the storage of their personal data that is required to be entered online. They must also accept the terms and conditions. The registration confirmation receipt, which is sent out by e-mail, and the original invoice showing the date of purchase will serve as proof of the extended warranty.
3. The warranty covers all defects of the product during the warranty period due to faults in workmanship or material at the purchase date. The warranty is limited to repair and/or replacement and does not include any other obligations including but not limited to incidental or consequential damages. The warranty is not valid if the product has been misused, used contrary to the instruction manual, or has been incorrectly connected to a power supply. This warranty does not apply to: – any damage to the product that is the result of improper or lack of maintenance
4. any product that has been altered or modified
5. any product where original identification (trade mark, serial number) markings have been defaced, altered or removed
6. any damage caused by non-observance of the instruction manual
7. any product not displaying the CE approval mark on the rating plate
8. any product that has been attempted to be repaired by a non-authorised warranty service centre or without prior authorisation by Techtronic Industries
9. any product connected to improper power supply (amps, voltage, frequency)
10. any damage caused by external influences (water, chemical, physical, shocks) or foreign substances
11. normal wear and tear spare parts – inappropriate use, overloading of the tool
12. use of non-approved accessories or parts
13. Power tool accessories provided with the tool or purchased separately, including but not limited to screw driver bits, drill bits, abrasive discs, sand paper and blades, lateral guide, etc.
14. Components (parts and accessories) subject to natural wear and tear, including but not limited to service & maintenance kits, carbon brushes, bearings, chuck, SDS drill bit attachment or reception, power cord, auxiliary handle, transport carry case, sanding plate, dust bag, dust exhaust tube, felt washers, impact wrench pins & springs, etc.
15. For servicing, the product must be sent or presented to a RYOBI authorised service station listed for each country in the following list of service station addresses. In some countries your local RYOBI dealer undertakes to send the product to the RYOBI service organisation. When sending a product to a RYOBI service station, the product should be safely packed without any dangerous shot description of the la marked with sender’s address and accompanied by a
16. A repair / replacement under this warranty is free of charge. It does not constitute an extension or a new start of the warranty period. Exchanged parts or products become our property. In some countries delivery charges or postage will have to be paid by the sender. Your statutory rights arising from the purchase of the product remain unaffected
17. This warranty is valid in the European Community, Switzerland, Iceland, Norway, Liechtenstein, Turkey, Russia, and the United Kingdom. Outside these areas, please contact your authorised RYOBI dealer to determine if another warranty applies.

AUTHORISED SERVICE CENTRE
Any request or issue with the product can be addressed to your local authorised service centres (visit www.ryobitools.eu) or directly to: Techtronic Industries GmbH, Max Eyth Straße 10, 71364 Winnenden, Germany. Please state the serial number and product type printed on the label.

EC DECLARATION OF CONFORMITY

High pressure inflator
Bamber range | Manufacturer Model number Serial We declare as the manufacturer under our sole responsibility that the product mentioned below fulfills all the relevant provisions of the following European Dianes European Regulations and harmonised Authorised to compile the technical file:

RYOBI is a trade mark of Ryobi Limited, and is used under license.

• Techtronic Industries GmbH
  • Max-Eyth-Straße 10, 71364 Winnenden, Germany
• Techtronic Industries (UK)
  • Ltd Parkway Marlow Bucks
  • SL7 1YL UK 20230417v1

References

• Que Faire de mes Déchets ? Découvrez les solutions pour tous vos déchets et nos conseils pour en produire moins.
• Ryobi Tools
• Ryobi Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>