ZNT D06 True Wireless TWS Earphone User Manual
- June 15, 2024
- ZNT
Table of Contents
ZNT D06 True Wireless TWS Earphone
Specifications
- Charging case: 1
- Right earphone: 1
- Left earphone: 1
- Large silicone ear-tips : 2
- Small silicone ear-tips: 2
- Charging cable: 1
- User manual: 1
COMPONENT LIST
- Charging case*1
- Right earphone *1
- Left earphone *1
- Large silicone ear-tips *2
- Small silicone ear-tips *2
- Charging cable *1
- User manual *1
WEARING METHOD
- Choosing the suitable size ear tips is critical for maximum external noise isolation and a snug, secure fit.
- Wear the earphones to your ears
Classify the left and right earphones, then tuck the ear-tip into the front ear fold facing up. Adjust the earbuds to a suitable angle until you have a tight and snug fit.
EARPHONE FUNCTION DESCRIPTION
USING THE CHARGING CASE
Open the charging case and take the earphones out.The earphones will enter pairing mode automatically.
EARPHONE AND CHARGING CASE LED INDICATOR
- EARPHONE LED INDICATOR
Resetting to factory module: with 8 consecutive clicks after the earphone is turned on; To clear the connection information between the earphone and the mobile phone (operate when it is not connected to the device)
PAIRING
The ears are into pairing module with the phone;
-
Press the earphone’s power button for 3 seconds until you hear the “power on” voice reminder, then release it. Both right and left earphones are re-connected and enter into pairing mode for accessing the Bluetooth device.
-
Turn on your smartphone’s Bluetooth function, and it will search for the earphone’s pairing
name” D06. Click the pairing name on the phone’s screen, and you will hear” Bluetooth connected” from the right earbud. Connected successfully. -
The right and left earphones re-connection
After the right earphones are powered on, long press the left earphone’s power button for 3 seconds until you hear the “power on” sound to release your finger, the left and right are connected. After that, you will hear the “Du” voice, the both earphones are enter pairing mode.
(If the right earbud has been connected to the smartphone, please pause the music to speed up the re-connection)
EARPHONE SPECIFICATION
- Model number: D06
- Chipset solution: JL 7003
- Bluetooth version: Bluetooth 5.3
- Support Agreement: HFP/HSP/A2DP/AVRCP
- Compatibility system: iOS/Android/Windows
- Operation distance: ≥10M(no obstacle)
- Waterproof level: IPX4
- Speaker’s Spec: Φ10MM,32Ω Moving coil unit
- Battery’s Spec : Earphone: 3.7V/50mAh
- Charging case: 3.7V/380mAh
- Earphone working time: 6 hours
- Charging case supplement working time :24 hours
- Charging time:
- Earphone: 1.5 hours
- Charging case: 1.5 hours
- Dimensions:
- Earphone: 21.8119.4221.49mm
- Charging case: 50.3150.3328.83mm
SAFETY RULES
- Do not place your device in a wet environment. Avoid oil, water or other liquid damage to your device, or it will affect the device’s function.
- Avoid using the Irritating organic solution to clean the device.
- Ensure the correct earphone usage requirement, and also think about the effects on the environment. To keep a fluent and stable connection, please place the smartphone and earphones within a 10m distance.
- If there is any connection or cut-out problem, please do not disassemble the earphones or accessories by yourself, or will affect your warranty service.
- When charging the earphones, please use the standard charging resource.
For your normal use, please make sure the earphones are fully charged.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AKHJ-D06