ZEMOJ 24PCS LED Wall Wash Light User Manual

June 15, 2024
ZEMOJ

ZEMOJ 24PCS LED Wall Wash Light User Manual

Installation and operating instructions:

  1. Plugged into a grounded power outlet for indoor use only.

  2. Don’t expose the device to rain or moisture, avoid the risk of fire or electric shock. Make sure that no flammable objects near the device.

  3. Install the equipment in a well-ventilated place, device surface at least 50cm far away from any subject, and ensure that the ventilation slots are not blocked.

  4. Disconnect the equipment from the power supply before any operation.

  5. The ambient temperature should not exceed 40°C, and the maximum ambient temperature is 45°C. Don’t operate the device at higher temperatures.

  6. The equipment should be stopped immediately, if a fault occurs, and do not repair the equipment by yourself. Improper maintenance can result in damage and malfunction. Contact technical support for repair approval. Only the same accessories can be used with the original parts, and make sure the power cord is not blocked or damaged.

  7. Do not expose your eyes to light sources, which can lead a seizure in sensitive people.

  8. The lamps are only used for decoration and not suitable for ordinary household lighting.

  9. Replacing the fuse: Unplug the device from the power supply, remove the fuse holder from its original position with a srewdriver, take out the burnt fuse, replace the fuse with the same characteristics, then re-rotate the screw, and connect the device to the power supply superior.

  10. WARNING: Stop using it if the fuse is still blowing after being replaced. Please contact customer support for further instructions, continued use may cause serious damage.

  11. Fix the equipment with the screw holes on the bracket to ensure that the equipment is firmly fixed to prevent vibration and movement during operation, and always check whether the structure of the equipment is strong enough to withstand equipment that is at least ten times.

  12. The equipment must be fixed by professionals in places that elders and children cannot reach, and no one can pass under or over the pedestrian crossing.
    CAUTION
    DO NOT OPEN THE HOUSING SHOCK HAZARD
    Please read this manual carefully before operating this product.

  13. End-of-life of the product: This sign indicates that this product should not be thrown into household waste in European Community countries and that waste should be recycled to support the sustainable recycling of resources in order to protect the environment and human health Utilize. If you need to recycle used electrical appliances, please go to an electrical appliance collection center or contact the dealer where you purchased the product to ensure the ecological recycling of the product.

  14. Before cleaning the device, disconnect it from the power source if connected. Do not use harsh cleaners. Wipe off dust or dirt from the product with a clean cloth. We are not responsible for damage caused by incorrect handling, improper use or wear and tear.

  15. We reserve the right to make technical modifications.

Please read this manual carefully before use

Note: this manual contains important information. installation, operation according to requirement of manual. Please save this manual for emergencies.

Startup steps for various modes

  1. Automatic mode
    Press “MENU” to find “XJXX”, and “XDXX” press “ENTER”. “Up” or “Down” key to select “1J00″,”2J00”, “3J00″…, or “1d00″,”2d00”,”3d00″… and press “ENTER” key. press the “ENTER” key twice to start the automatic play speed adjustment, and the “Up” or “Down” key to start the automatic play speed adjustment. (Higher values are faster, lower values are slower)

  2. Sound Mode
    Press “MENU” to find “SU00” and press “ENTER”. Press “Up” or “Down” to select “SU00″and press “ENTER” key Press the “ENTER” key twice to start the sound sensitivity adjustment, and the “up” or “down” key to start the sound sensitivity speed. (Higher values are faster, lower values are slower)

Technical Parameters

Voltage: AC110-220V 50/60HZ
Light source: 24pcs 3in1 (RGB)lamp beads
Color: R,G,B Channel:2/3/4/6/7/12CH/24CH
Operation: DMX512, Auto, Sound, Master-slave

Unpacking instructions

When you receive the device, open it and check whether the goods are complete. If not, please notify the carrier immediately and preserve the packaging, and if the damage is revealed, preserve the packaging and all packing materials for safe transportation of the device.

  • 1 pcs lamps 1 instruction manual
  • 1 power cord
  • 2 bracket
  • 2 screws

LED DISPLAY

  1. POWER IN
  2. Control buttons (MENU UP DOWN ENTER)
  3. Display
  4. DMX IN
  5. DMX OUT
  6. POWER OUT

Procedure for Installing support

  1. Install the bow bracket and fix it with screws

  2. Install the bow bracket winth the lamp hook

  3. Confirm that the lamp hook porsition is installed correctly

  4. The lamp hook position is installed successfully

Hook brackets are not included in the package

Console mode and master-slave mode: DMX OUT to the DMX IN of the No. 1 fixture; DMX OUT of the No. 1 fixture is connected to the DMX IN of the No. 2 fixture; Press “MENU” to find “Addr”, press “ENTER”, display “A001” press “Up” or “Down” to select the value of the console; Master and slave settings: No. 1 light fixture is set to self- propelled or voice-activated function according to the startup mode; 2, 3, and 4**** are set to DMX512 mode: DMX address code is 001;

LED Display Description

Item Display Date Function
1 A001 001- 512 DMX512 address setup -2CH Model
2 C001 001- 512 DMX512 address setup -3CH Model
3 d001 001- 512 DMX512 address setup -4CH Model
4 E001 001- 512 DMX512 address setup -6CH Model
5 H001 001- 512 DMX512 address setup -7CH Model
6 L001 001- 512 DMX512 address setup -12CH Model
7 P001 001- 512 DMX512 address setup -24CH Model
8 r255 000 – 255 Red dimming, from dark to bright
9 G255 000 – 255 Green dimming, from dark to bright
10 b255 000 – 255 Blue dimming, from dark to bright
11 I255 000-255 Wireless remote control brightness adjustment
12 FF00 00 – 20 RGB Strobe, speed from slow to fast
13 1J00 00 – 20 Point to point control-1, from slow to fast
14 2J00 00 – 20 Point to point control-2, from slow to fast
15 3J00 00 – 20 Point to point control-3, from slow to fast
16 4J00 00 – 20 Point to point control-4, from slow to fast
17 5J00 00 – 20 Point to point control-5, from slow to fast
18 6J00 00 – 20 Point to point control-6, from slow to fast
19 7J00 00 – 20 Point to point control-7, from slow to fast
20 8J00 00 – 20 Point to point control-8, from slow to fast
21 9J00 00 – 20 Effect 1-8 Point to point control circulate, fromslow to

fast.
22| 1d00| 00 – 20| Red gradient effect, from slow to fast.
23| 2d00| 00 – 20| Green gradient effect, from slow to fast.
24| 3d00| 00 – 20| Blue gradient effect, from slow to fast.
25| 4d00| 00 – 20| Purple gradient effect, from slow to fast.
26| 5d00| 00 – 20| Yellow gradient effect, from slow to fast.
27| 6d00| 00 – 20| Red, green, blue, purple, yellow cycle gradual change, speed from slow to fast.
28| RF| ON/OF| Wireless on / off
---|---|---|---
29| SU00| 00 – 20| Sound point control running effect,  from slow to fast

DMX Channel Function

2Channel Model (A001)

Channel DMX Date Function Description

CH1

| 000-005| None
006-016| LED color selection :red
017-027| LED color selection :green
028-038| LED color selection :blue
039-049| LED color selection :yellow
050-060| LED color selection :purple
061-071| LED color selection :Cyan
072-082| LED color selection :white
083-093| Point to point control-1
094-104| Point to point control-2
105-115| Point to point control-3
116-126| Point to point control-4
127-137| Point to point control-5
138-148| Point to point control-6
149-159| Point to point control-7
160-170| Point to point control-8
171-181| Point to point control-9
182-192| Red gradient effect
193-203| Green gradient effect
204-214| Blue gradient effect
215-225| Purple gradient effect
226-236| Yellow gradient effect
237-247| Cyclic gradient effect
248-255| Sound
CH2| 000-255| Functional speed, from slow to fast

3Channel Model (C001)

Channel Function Function Description
CH1 000-255 Red Dimmer, from dak to bright
CH2 000-255 Green Dimmer, from dak to bright
CH3 000-255 Blue Dimmer, from dak to bright

4Channel Model (d001)

Channel DMX Date Function Description
CH1 000-255 RGB Sum Dimmer, from dak to bright
CH2 000-255 R Red dimming, from dark to bright
CH3 000-255 G Green dimming, from dark to bright
CH4 000-255 B Blue dimming, from dark to bright

6Channel Model (E001)

Channel DMX Date Function Description
CH1 000-255 R1 Red dimming, from dark to bright
CH2 000-255 G1 Green dimming, from dark to bright
CH3 000-255 B1 Blue dimming, from dark to bright
CH4 000-255 R2 Red dimming, from dark to bright
CH5 000-255 G2 Green dimming, from dark to bright
CH6 000-255 B2 Blue dimming, from dark to bright

7Channel Model (H001)

Channel DMX Date Function Description
CH1 000-255 RGB Total dimming, from dark to bright
CH2 000-255 R Red dimming, from dark to bright
CH3 000-255 G Green dimming, from dark to bright
CH4 000-255 B Blue dimming, from dark to bright
CH5 007-255 RGB strobe

CH6

| 000-011| No effect
---|---|---
012-023| LED Color: Red
024-035| LED Color: Green
036-047| LED Color: Blue
048-059| LED Color: Yellow
060-071| LED Color: Purple
072-083| LED Color :Cyan
084-095| LED Color: White
096-107| Program Effect -1
108-119| Program Effect -2
120-132| Program Effect -3
133-143| Program Effect -4
144-155| Program Effect -5
156-167| Program Effect -6
168-179| Program Effect -7
180-191| Program Effect -8
192-203| Program Effect -9
204-217| Program Effect -10
218-227| Program Effect -11
228-239| Program Effect -12
240-251| Program Effect -13
252-255| Sound Effect
CH7| 000-255| Speed, from slow to fast

12 Channel Model (L001)– 4 Section Model

Channel Function Function Description
CH1 000-255 R1 Dimmer, from dak to bright
CH2 000-255 G1 Dimmer, from dak to bright
CH3 000-255 B1 Dimmer, from dak to bright
CH4 000-255 R2 Dimmer, from dak to bright
CH5 000-255 G2 Dimmer, from dak to bright
CH6 000-255 B2 Dimmer, from dak to bright
--- --- ---
CH7 000-255 R3 Dimmer, from dak to bright
CH8 000-255 G3 Dimmer, from dak to bright
CH9 000-255 B3 Dimmer, from dak to bright
CH10 000-255 R4 Dimmer, from dak to bright
CH11 000-255 G4 Dimmer, from dak to bright
CH12 000-255 B4 Dimmer, from dak to bright

12 Channel Model (L001)– 4 Section Model

Channel Function Function Description
CH1 000-255 R1 Dimmer, from dak to bright
CH2 000-255 G1 Dimmer, from dak to bright
CH3 000-255 B1 Dimmer, from dak to bright
CH4 000-255 R2 Dimmer, from dak to bright
CH5 000-255 G2 Dimmer, from dak to bright
CH6 000-255 B2 Dimmer, from dak to bright
CH7 000-255 R3 Dimmer, from dak to bright
CH8 000-255 G3 Dimmer, from dak to bright
CH9 000-255 B3 Dimmer, from dak to bright
CH10 000-255 R4 Dimmer, from dak to bright
CH11 000-255 G4 Dimmer, from dak to bright
CH12 000-255 B4 Dimmer, from dak to bright
CH13 000-255 R5 Dimmer, from dak to bright
CH14 000-255 G5 Dimmer, from dak to bright
CH15 000-255 B5 Dimmer, from dak to bright
CH16 000-255 R6 Dimmer, from dak to bright
CH17 000-255 G6 Dimmer, from dak to bright
CH18 000-255 B6 Dimmer, from dak to bright
CH19 000-255 R7 Dimmer, from dak to bright
CH20 000-255 G7 Dimmer, from dak to bright
CH21 000-255 B7 Dimmer, from dak to bright
CH22 000-255 R8 Dimmer, from dak to bright
CH23 000-255 G8 Dimmer, from dak to bright
CH24 000-255 B8 Dimmer, from dak to bright

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals