Magichome 3L-UK Shower Head Instructions

June 15, 2024
Magichome

Magichome 3L-UK Shower Head

Magichome-3L-UK-Shower-Head-product

FUNCTION INTRODUCTION

  • Massage Mode
  • Jetting Mode (Mixed Mode)
  • Rainfall Mode

HOW TO REPLACE THE IONIC FILTER BALL

  • Hold the handle and rotate it counterclockwiseMagichome-3L-UK-Shower-Head-fig- \(5\)
  • Remove the metal filter and fill it as shownMagichome-3L-UK-Shower-Head-fig- \(6\)
  • After the filling is completed, the installation is as shown in the figure.
    • Don’t miss the filter when installingMagichome-3L-UK-Shower-Head-fig- \(7\)
    • After filling the metal filter, the negative ion ball will be fixed so that it will not fall out
  • Hold the handle and rotate it clockwise to complete the replacement of the negative ion ballMagichome-3L-UK-Shower-Head-fig- \(8\)
  • Replace the third-grade filter box
    • The calcium sulfite balls point inwards and the cotton points outwards.
    • After the replacement, turn the shower head clockwise.

HOW TO REPLACE THE NOZZLE PANEL

  • Hold the shower head with one hand and rotate the nozzle panel counterclockwise with the other hand
    Stainless Steel Nozzle PanelMagichome-3L-UK-Shower-Head-fig-
\(12\)

  • Replace the stainless steel nozzle panel with a silicone panel

    • No need to add the sealing ring during installation.Magichome-3L-UK-Shower-Head-fig- \(13\)
  • Hold the shower head with one hand and rotate the nozzle panel clockwise with the other hand to complete the replacement of the panel

Internal Disassembly Diagram

Magichome-3L-UK-Shower-Head-fig- \(14\)

Not Removable Non-professionals are not allowed to disassemble privately.

How to Clean Stainless Steel Nozzle Panel

  1. Remove the shower and disassemble the Stainless Steel Nozzle Panel.
  2. Prepare a container and white vinegar, put the Stainless Steel Nozzle Panel in it, pour a little white vinegar, and soak for 3 hours.Magichome-3L-UK-Shower-Head-fig- \(15\)
  3. Take out the Stainless Steel Nozzle Panel and wipe it dry. The vinegar will likely have removed most of the surface limescale. Give it a good scrub with a clean sponge if there are still minor blemishes.
  4. If there are still stubborn stains, please use a used toothbrush on Stainless Steel Nozzle Panel to remove stubborn stains.
  5. Reattach your clean shower head, then run the shower for at least 30 seconds before using it.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals